main
Ray
Publish 0.1.0
68fad1b
KTM1331TA-ST3
CONNTEK · Hall Sensor · SOT-23-3L
KTM1331TA-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input, operating range 1.8V to 5.5V (100nF bypass capacitor recommended close to the pin). |
| 2 | OUTPUT | output | Push-pull output pin of the latch TMR switch; turns on above BOP and off below BRP (VOL max 0.05V at 1mA). |
| 3 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | 5.5 | V | Operating | 6 | |
| Output Low Voltage (On) | VOL | 0.008 | 0.05 | V | IOUT=1mA | 6 | |
| Awake Supply Current | IDD(AVG) | 1.9 | μA | TA=+25℃, VDD=3.0V | 6 | ||
| Sampling Frequency | FS | 5000 | Hz | Operating | 6 | ||
| Magnetic threshold operate point | BOP | 40 | 45 | 50 | Gauss | TA=+25℃, VDD=3.0V | 6 |
| Magnetic threshold release point | BRP | -50 | -45 | -40 | Gauss | TA=+25℃, VDD=3.0V | 6 |
| Magnetic hysteresis | BHY | 90 | Gauss | 6 | |||
| Supply Voltage (recommended) | VDD | 1.8 | 5.5 | V | Operating | 5 | |
| Operating temperature range | TA | -40 | 125 | °C | Operating | 5 | |
| Supply Voltage | VDD | 6 | V | @TA=+25℃ | 5 | ||
| Reverse voltage (VDD) | VDD_REV | -0.3 | V | @TA=+25℃ | 5 | ||
| Output Current | IOUTPUT | 5 | mA | @TA=+25℃ | 5 | ||
| Magnetic Flux Density | B | 3000 | Gauss | <5min | 5 | ||
| Storage temperature | TSTG | -50 | 150 | °C | @TA=+25℃ | 5 | |
| Junction temperature | TJ | 150 | °C | @TA=+25℃ | 5 | ||
| ESD HBM | ESD HBM | 8000 | V | Human Body Model | 5 | ||
| Reflow Temperature (MAX) | T reflow | 260 | °C | 5 |
CAD (KiCad official)
- Symbol:
KTM1331TA-ST3 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
ktm1331ta-st3-etched.step/ktm1331ta-st3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ktm1331ta-st3.step/ktm1331ta-st3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (14 pp, sha256
42fc568bdd8e849d, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KTM1331TA-ST3
**CONNTEK** · Hall Sensor · SOT-23-3L
KTM1331TA-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input, operating range 1.8V to 5.5V (100nF bypass capacitor recommended close to the pin). |
| 2 | OUTPUT | output | Push-pull output pin of the latch TMR switch; turns on above BOP and off below BRP (VOL max 0.05V at 1mA). |
| 3 | GND | power_in | Ground pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | | 5.5 | V | Operating | 6 |
| Output Low Voltage (On) | VOL | | 0.008 | 0.05 | V | IOUT=1mA | 6 |
| Awake Supply Current | IDD(AVG) | | 1.9 | | μA | TA=+25℃, VDD=3.0V | 6 |
| Sampling Frequency | FS | | 5000 | | Hz | Operating | 6 |
| Magnetic threshold operate point | BOP | 40 | 45 | 50 | Gauss | TA=+25℃, VDD=3.0V | 6 |
| Magnetic threshold release point | BRP | -50 | -45 | -40 | Gauss | TA=+25℃, VDD=3.0V | 6 |
| Magnetic hysteresis | BHY | | 90 | | Gauss | | 6 |
| Supply Voltage (recommended) | VDD | 1.8 | | 5.5 | V | Operating | 5 |
| Operating temperature range | TA | -40 | | 125 | °C | Operating | 5 |
| Supply Voltage | VDD | | | 6 | V | @TA=+25℃ | 5 |
| Reverse voltage (VDD) | VDD_REV | -0.3 | | | V | @TA=+25℃ | 5 |
| Output Current | IOUTPUT | | | 5 | mA | @TA=+25℃ | 5 |
| Magnetic Flux Density | B | | | 3000 | Gauss | <5min | 5 |
| Storage temperature | TSTG | -50 | | 150 | °C | @TA=+25℃ | 5 |
| Junction temperature | TJ | | | 150 | °C | @TA=+25℃ | 5 |
| ESD HBM | ESD HBM | | | 8000 | V | Human Body Model | 5 |
| Reflow Temperature (MAX) | T reflow | | | 260 | °C | | 5 |
## CAD (KiCad official)
- Symbol: `KTM1331TA-ST3`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `ktm1331ta-st3-etched.step` / `ktm1331ta-st3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ktm1331ta-st3.step` / `ktm1331ta-st3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [CONNTEK datasheet](docs/ktm1331ta-st3-datasheet.pdf) (14 pp, sha256 `42fc568bdd8e849d`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ktm1331ta-st3-datasheet.pdf)