component
KTM1331MC-ST3
Public Made by Adomby adom
CONNTEK Hall Switches, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
KTM1331MC-ST3
CONNTEK · Hall Switches · SOT-23-3L
KTM1331MC-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input; the datasheet gives an operating supply range of 1.8 V to 5.5 V, with an absolute maximum of 6 V and a reverse supply limit of -0.3 V, and a 100 nF capacitor placed close to this pin is recommended for filtering. |
| 2 | OUTPUT | output | Switch output that goes low when the magnetic field exceeds BOP and high when it falls below BRP, with a maximum output drive current of 5 mA. |
| 3 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 Supply voltage (operating state) | VDD | 1.8 | 5.5 | V | 工作状态 | 6 | |
| 供电电压范围 Supply voltage range (chip operating) | VDD | 1.8 | 5.5 | V | 芯片工作 | 5 | |
| 工作温度范围 Operating temperature range (chip operating) | TA | -40 | 125 | °C | 芯片工作 | 5 | |
| 磁场工作点 Magnetic operate point | BOP | 12 | 17 | 22 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| 磁场释放点 Magnetic release point | BRP | -22 | -17 | -12 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| 平均电流 Average current | IDD(AVG) | 500 | 600 | 800 | nA | TA=+25℃, VDD=3.0V | 6 |
| 唤醒状态电流 Awake-state current | IDD(Awake) | 1 | 1.9 | 2.8 | μA | TA=+25℃, VDD=3.0V | 6 |
| 输出低电平 Output low voltage | VOL | 0.008 | 0.05 | V | IOUT=1mA | 6 | |
| 供电电压 Supply voltage (absolute maximum) | VDD | 6 | V | 5 | |||
| 反向电源电压 Reverse supply voltage | VDD_REV | -0.3 | V | 5 | |||
| 输出驱动电流 Output drive current | IOUTPUT | 5 | mA | 5 | |||
| 磁感应强度 Magnetic flux density | B | 3000 | Gauss | <5min | 5 | ||
| 存储温度范围 Storage temperature range | TSTG | -50 | 150 | °C | 5 | ||
| 结点最高耐温 Maximum junction temperature | TJ | 150 | °C | 5 | |||
| 回流焊温度 Reflow soldering temperature | T reflow | 260 | °C | 5 | |||
| 休眠状态电流 Sleep-state current | IDD(Sleep) | 148 | nA | TA=+25℃, VDD=3.0V | 6 | ||
| 周期 Period (operating state) | TPERIOD | 625 | μs | 工作状态 | 6 | ||
| 采样频率 Sampling frequency (operating state) | FS | 1600 | Hz | 工作状态 | 6 | ||
| 磁滞 Hysteresis (/BOP/-/BRP/) | BHY | 34 | Gauss | 7 |
CAD (KiCad official)
- Symbol:
KTM1331MC-ST3 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
ktm1331mc-st3-etched.step/ktm1331mc-st3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ktm1331mc-st3.step/ktm1331mc-st3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (14 pp, sha256
fb5754a98f3fc29a, retrieved 2026-10-20, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KTM1331MC-ST3
**CONNTEK** · Hall Switches · SOT-23-3L
KTM1331MC-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input; the datasheet gives an operating supply range of 1.8 V to 5.5 V, with an absolute maximum of 6 V and a reverse supply limit of -0.3 V, and a 100 nF capacitor placed close to this pin is recommended for filtering. |
| 2 | OUTPUT | output | Switch output that goes low when the magnetic field exceeds BOP and high when it falls below BRP, with a maximum output drive current of 5 mA. |
| 3 | GND | power_in | Ground pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 Supply voltage (operating state) | VDD | 1.8 | | 5.5 | V | 工作状态 | 6 |
| 供电电压范围 Supply voltage range (chip operating) | VDD | 1.8 | | 5.5 | V | 芯片工作 | 5 |
| 工作温度范围 Operating temperature range (chip operating) | TA | -40 | | 125 | °C | 芯片工作 | 5 |
| 磁场工作点 Magnetic operate point | BOP | 12 | 17 | 22 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| 磁场释放点 Magnetic release point | BRP | -22 | -17 | -12 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| 平均电流 Average current | IDD(AVG) | 500 | 600 | 800 | nA | TA=+25℃, VDD=3.0V | 6 |
| 唤醒状态电流 Awake-state current | IDD(Awake) | 1 | 1.9 | 2.8 | μA | TA=+25℃, VDD=3.0V | 6 |
| 输出低电平 Output low voltage | VOL | | 0.008 | 0.05 | V | IOUT=1mA | 6 |
| 供电电压 Supply voltage (absolute maximum) | VDD | | | 6 | V | | 5 |
| 反向电源电压 Reverse supply voltage | VDD_REV | -0.3 | | | V | | 5 |
| 输出驱动电流 Output drive current | IOUTPUT | | | 5 | mA | | 5 |
| 磁感应强度 Magnetic flux density | B | | | 3000 | Gauss | <5min | 5 |
| 存储温度范围 Storage temperature range | TSTG | -50 | | 150 | °C | | 5 |
| 结点最高耐温 Maximum junction temperature | TJ | | | 150 | °C | | 5 |
| 回流焊温度 Reflow soldering temperature | T reflow | | | 260 | °C | | 5 |
| 休眠状态电流 Sleep-state current | IDD(Sleep) | | 148 | | nA | TA=+25℃, VDD=3.0V | 6 |
| 周期 Period (operating state) | TPERIOD | | 625 | | μs | 工作状态 | 6 |
| 采样频率 Sampling frequency (operating state) | FS | | 1600 | | Hz | 工作状态 | 6 |
| 磁滞 Hysteresis (/BOP/-/BRP/) | BHY | | 34 | | Gauss | | 7 |
## CAD (KiCad official)
- Symbol: `KTM1331MC-ST3`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `ktm1331mc-st3-etched.step` / `ktm1331mc-st3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ktm1331mc-st3.step` / `ktm1331mc-st3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [CONNTEK datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603380626800058368) (14 pp, sha256 `fb5754a98f3fc29a`, retrieved 2026-10-20, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ktm1331mc-st3-datasheet.pdf)