component
KTM1301TA-ST3
Public Made by Adomby adom
CONNTEK Linear Hall Sensors, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownKTM1301TA-ST3
CONNTEK · Linear Hall Sensors · SOT-23-3L
KTM1301TA-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the chip operates from 1.8 V to 5.5 V, and a 100 nF capacitor should be placed between VDD and ground as close to the VDD pin as possible to filter supply noise. |
| 2 | OUTPUT | output | CMOS push-pull output that goes low when the magnetic field exceeds the operating point BOP and goes high when the field falls below the release point BRP, with an output drive current of 5 mA maximum. |
| 3 | GND | power_in | Ground pin; the datasheet's application note connects the 100 nF VDD decoupling capacitor between the supply and this ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output low voltage | VOL | 0.008 | 0.05 | V | IOUT = 1mA | 11 | |
| Supply voltage | VDD | 1.8 | 5.5 | V | Operating | 11 | |
| Magnetic operating point (south pole) | BOPS | 40 | 45 | 50 | Gauss | TA = +25°C, VDD = 3.0V | 12 |
| Magnetic release point (south pole) | BRPS | 31 | 36 | 41 | Gauss | TA = +25°C, VDD = 3.0V | 12 |
| Magnetic operating point (north pole) | BOPN | -50 | -45 | -40 | Gauss | TA = +25°C, VDD = 3.0V | 12 |
| Magnetic release point (north pole) | BRPN | -41 | -36 | -31 | Gauss | TA = +25°C, VDD = 3.0V | 12 |
| Supply voltage range | VDD | 1.8 | 5.5 | V | Chip operating | 11 | |
| Operating temperature range | TA | -40 | 125 | °C | Chip operating | 11 | |
| Supply voltage | VDD | 6 | V | TA = +25°C (table header) | 11 | ||
| Reverse supply voltage | VDD_REV | -0.3 | V | TA = +25°C (table header); printed as a single Value | 11 | ||
| Output drive current | IOUTPUT | 5 | mA | TA = +25°C (table header) | 11 | ||
| Maximum magnetic field | B | 3000 | Gauss | <5min | 11 | ||
| Storage temperature range | TSTG | -50 | 150 | °C | TA = +25°C (table header) | 11 | |
| Maximum junction temperature | TJ | 150 | °C | TA = +25°C (table header) | 11 | ||
| Maximum soldering temperature | Tsoldering | 260 | °C | TA = +25°C (table header) | 11 | ||
| HBM ESD capability | ESD | 8000 | V | HBM | 11 |
CAD (KiCad official)
- Symbol:
KTM1301TA-ST3 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
ktm1301ta-st3-etched.step/ktm1301ta-st3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ktm1301ta-st3.step/ktm1301ta-st3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (20 pp, sha256
e97a516eb793ebf7, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).