component
KTM1301SD-ST3
Public Made by Adomby adom
CONNTEK Linear Hall Sensors, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
KTM1301SD-ST3
CONNTEK · Linear Hall Sensors · SOT-23-3L
KTM1301SD-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input, operating from 1.8 V to 5.5 V; a 100 nF capacitor should be placed between this pin and ground as close to the pin as possible to filter supply noise. |
| 2 | OUTPUT | output | CMOS push-pull output that goes low when the magnetic field exceeds the operating point BOP and goes high when it falls below the release point BRP; output drive current is limited to 5 mA absolute maximum. |
| 3 | GND | power_in | Ground reference for the supply and the output stage, with the 100 nF VDD decoupling capacitor returned to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output low voltage | VOL | 0.008 | 0.05 | V | IOUT = 1mA | 11 | |
| Supply voltage | VDD | 1.8 | 5.5 | V | Operating | 11 | |
| Magnetic operating point (south) | BOPS | 6 | 9 | 12 | Gauss | TA = +25◦C, VDD = 3.0V | 13 |
| Magnetic release point (south) | BRPS | 3 | 6 | 9 | Gauss | TA = +25◦C, VDD = 3.0V | 13 |
| Magnetic operating point (north) | BOPN | -12 | -9 | -6 | Gauss | TA = +25◦C, VDD = 3.0V | 13 |
| Magnetic release point (north) | BRPN | -9 | -6 | -3 | Gauss | TA = +25◦C, VDD = 3.0V | 13 |
| Supply voltage | VDD | 6 | V | 11 | |||
| Reverse supply voltage | VDD_REV | -0.3 | V | 11 | |||
| Output drive current | IOUTPUT | 5 | mA | 11 | |||
| Maximum magnetic field | B | 3000 | Gauss | <5min | 11 | ||
| Storage temperature range | TST | -50 | 150 | °C | 11 | ||
| Maximum junction temperature | TJ | 150 | °C | 11 | |||
| Maximum soldering temperature | Tsoldering | 260 | °C | 11 | |||
| ESD HBM ESD capability | ESD | 8000 | V | 11 | |||
| Supply voltage range | VDD | 1.8 | 5.5 | V | Chip operating | 11 | |
| Operating temperature range | TA | -40 | 125 | °C | Chip operating | 11 |
CAD (KiCad official)
- Symbol:
KTM1301SD-ST3 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
ktm1301sd-st3-etched.step/ktm1301sd-st3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ktm1301sd-st3.step/ktm1301sd-st3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (20 pp, sha256
e97a516eb793ebf7, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KTM1301SD-ST3
**CONNTEK** · Linear Hall Sensors · SOT-23-3L
KTM1301SD-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input, operating from 1.8 V to 5.5 V; a 100 nF capacitor should be placed between this pin and ground as close to the pin as possible to filter supply noise. |
| 2 | OUTPUT | output | CMOS push-pull output that goes low when the magnetic field exceeds the operating point BOP and goes high when it falls below the release point BRP; output drive current is limited to 5 mA absolute maximum. |
| 3 | GND | power_in | Ground reference for the supply and the output stage, with the 100 nF VDD decoupling capacitor returned to this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output low voltage | VOL | | 0.008 | 0.05 | V | IOUT = 1mA | 11 |
| Supply voltage | VDD | 1.8 | | 5.5 | V | Operating | 11 |
| Magnetic operating point (south) | BOPS | 6 | 9 | 12 | Gauss | TA = +25◦C, VDD = 3.0V | 13 |
| Magnetic release point (south) | BRPS | 3 | 6 | 9 | Gauss | TA = +25◦C, VDD = 3.0V | 13 |
| Magnetic operating point (north) | BOPN | -12 | -9 | -6 | Gauss | TA = +25◦C, VDD = 3.0V | 13 |
| Magnetic release point (north) | BRPN | -9 | -6 | -3 | Gauss | TA = +25◦C, VDD = 3.0V | 13 |
| Supply voltage | VDD | | | 6 | V | | 11 |
| Reverse supply voltage | VDD_REV | -0.3 | | | V | | 11 |
| Output drive current | IOUTPUT | | | 5 | mA | | 11 |
| Maximum magnetic field | B | | | 3000 | Gauss | <5min | 11 |
| Storage temperature range | TST | -50 | | 150 | °C | | 11 |
| Maximum junction temperature | TJ | | | 150 | °C | | 11 |
| Maximum soldering temperature | Tsoldering | | | 260 | °C | | 11 |
| ESD HBM ESD capability | ESD | | | 8000 | V | | 11 |
| Supply voltage range | VDD | 1.8 | | 5.5 | V | Chip operating | 11 |
| Operating temperature range | TA | -40 | | 125 | °C | Chip operating | 11 |
## CAD (KiCad official)
- Symbol: `KTM1301SD-ST3`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `ktm1301sd-st3-etched.step` / `ktm1301sd-st3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ktm1301sd-st3.step` / `ktm1301sd-st3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [CONNTEK datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758161716884848640) (20 pp, sha256 `e97a516eb793ebf7`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ktm1301sd-st3-datasheet.pdf)