main
Ray
Publish 0.1.0
9f08d89
KTH7812-X-N-QN16
CONNTEK · Hall Sensor · QFN-16L(3x3)
KTH7812-X-N-QN16 from CONNTEK, in a QFN-16L(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V | power_in | V-phase incremental UVW commutation output signal, one of three Hall-style phase outputs (50% duty, 120° apart). |
| 2 | A | output | A-phase incremental ABZ quadrature output signal; A leads B for clockwise rotation. |
| 3 | Z | output | Z-phase index (zero-position) incremental output signal, rising edge once per revolution at the zero position. |
| 4 | MOSI | input | SPI master data line to the sensor; must be pulled up to VDD if SPI is not used. |
| 5 | CS | input | SPI chip select; must be pulled up to VDD if SPI is not used. |
| 6 | B | output | B-phase incremental ABZ quadrature output signal, lagging A by 1/4 cycle for clockwise rotation. |
| 7 | MISO | output | SPI slave data output from the sensor to the host. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | W | output | W-phase incremental UVW commutation output signal, one of three Hall-style phase outputs (50% duty, 120° apart). |
| 10 | TEST | passive | Manufacturer test pin that must be connected directly to GND in use. |
| 11 | MGL | output | Magnetic field strength too-low alarm output, driven by the programmable mgl threshold. |
| 12 | SCLK | input | SPI clock input; must be pulled up to VDD if SPI is not used. |
| 13 | VDD | power_in | Supply input; 3.0-3.6V (typ. 3.3V) or 4.5-5.5V (typ. 5V) per the key-parameter tables. |
| 14 | NC | unconnected | Not connected. |
| 15 | U | output | U-phase incremental UVW commutation output signal, one of three Hall-style phase outputs (50% duty, 120° apart). |
| 16 | MGH | output | Magnetic field strength too-high alarm output, driven by the programmable mgh threshold. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | QFN-16L(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作电压 | 4.5 | 5 | 5.5 | V | 表8 @5V 供电 | 13 | |
| 磁场强度 | 30 | 60 | 150 | mT | 表8 @5V 供电 | 13 | |
| 非线性误差 | -0.35 | 0.35 | ° | 表8 @5V 供电 | 13 | ||
| ESD(HBM) | -5 | 5 | KV | HBM 模型 | 9 | ||
| ESD(HBM) | -5 | 5 | KV | HBM 模型 | 13 | ||
| 工作温度范围 | -40 | 125 | °C | 4 |
CAD (KiCad official)
- Symbol:
KTH7812-X-N-QN16 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16L(3x3) (KiCad packages3D, STEP)
- 3D model files:
kth7812-x-n-qn16-etched.step/kth7812-x-n-qn16-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kth7812-x-n-qn16.step/kth7812-x-n-qn16.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (32 pp, sha256
62cadc1ac96bad58, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KTH7812-X-N-QN16
**CONNTEK** · Hall Sensor · QFN-16L(3x3)
KTH7812-X-N-QN16 from CONNTEK, in a QFN-16L(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V | power_in | V-phase incremental UVW commutation output signal, one of three Hall-style phase outputs (50% duty, 120° apart). |
| 2 | A | output | A-phase incremental ABZ quadrature output signal; A leads B for clockwise rotation. |
| 3 | Z | output | Z-phase index (zero-position) incremental output signal, rising edge once per revolution at the zero position. |
| 4 | MOSI | input | SPI master data line to the sensor; must be pulled up to VDD if SPI is not used. |
| 5 | CS | input | SPI chip select; must be pulled up to VDD if SPI is not used. |
| 6 | B | output | B-phase incremental ABZ quadrature output signal, lagging A by 1/4 cycle for clockwise rotation. |
| 7 | MISO | output | SPI slave data output from the sensor to the host. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | W | output | W-phase incremental UVW commutation output signal, one of three Hall-style phase outputs (50% duty, 120° apart). |
| 10 | TEST | passive | Manufacturer test pin that must be connected directly to GND in use. |
| 11 | MGL | output | Magnetic field strength too-low alarm output, driven by the programmable mgl threshold. |
| 12 | SCLK | input | SPI clock input; must be pulled up to VDD if SPI is not used. |
| 13 | VDD | power_in | Supply input; 3.0-3.6V (typ. 3.3V) or 4.5-5.5V (typ. 5V) per the key-parameter tables. |
| 14 | NC | unconnected | Not connected. |
| 15 | U | output | U-phase incremental UVW commutation output signal, one of three Hall-style phase outputs (50% duty, 120° apart). |
| 16 | MGH | output | Magnetic field strength too-high alarm output, driven by the programmable mgh threshold. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | QFN-16L(3x3) |
| Category | Sensors |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作电压 | | 4.5 | 5 | 5.5 | V | 表8 @5V 供电 | 13 |
| 磁场强度 | | 30 | 60 | 150 | mT | 表8 @5V 供电 | 13 |
| 非线性误差 | | -0.35 | | 0.35 | ° | 表8 @5V 供电 | 13 |
| ESD(HBM) | | -5 | | 5 | KV | HBM 模型 | 9 |
| ESD(HBM) | | -5 | | 5 | KV | HBM 模型 | 13 |
| 工作温度范围 | | -40 | | 125 | °C | | 4 |
## CAD (KiCad official)
- Symbol: `KTH7812-X-N-QN16`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: QFN-16L(3x3) (KiCad packages3D, STEP)
- 3D model files: `kth7812-x-n-qn16-etched.step` / `kth7812-x-n-qn16-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `kth7812-x-n-qn16.step` / `kth7812-x-n-qn16.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [CONNTEK datasheet](docs/kth7812-x-n-qn16-datasheet.pdf) (32 pp, sha256 `62cadc1ac96bad58`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/kth7812-x-n-qn16-datasheet.pdf)