main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers kth5702aq2qns: viewers · Ray
kth5702aq2qns-etched.glb Publish 0.1.0 · Ray
kth5702aq2qns-etched.step kth5702aq2qns: factory component page (tier=lcsc) · Ray
kth5702aq2qns-hero.glb kth5702aq2qns: hero GLB from the etched model (keeps the MPN mark) · Ray
kth5702aq2qns-hero.overlay.json Publish 0.1.0 · Ray
kth5702aq2qns.glb Publish 0.1.0 · Ray
kth5702aq2qns.kicad_mod Publish 0.1.0 · Ray
kth5702aq2qns.kicad_sym Publish 0.1.0 · Ray
kth5702aq2qns.lbr Publish 0.1.0 · Ray
kth5702aq2qns.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

KTH5702AQ2QNS

CONNTEK · Hall Sensor · QFN-16L(3x3)

KTH5702AQ2QNS from CONNTEK, in a QFN-16L(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Data ready or Wake-up & Sleep mode interrupt signal output, set to 1 after a measurement or when the angle exceeds the threshold, until the data is read back.
2 CS input Chip select, active low and controlled by the SPI master in SPI mode; pulled up to VDD_IO in I2C mode.
3 SCL/SCLK input I2C or SPI clock signal input (SPI up to 5 MHz, I2C up to 400 kHz).
4 NC unconnected Not connected; the datasheet recommends grounding all NC pins.
5 SDA/MOSI bidirectional I2C data input/output port, or SPI data from master output to slave input.
6 MISO output SPI data from slave output to master input; shorted to MOSI when using 3-wire SPI.
7 TRIG bidirectional Single measurement trigger signal; must be connected to ground when unused and cannot float when configured as trigger.
8 VDD_IO power_in IO power supply, 1.8 V up to VDD (absolute maximum 6 V).
9 NC unconnected Not connected; the datasheet recommends grounding all NC pins.
10 NC unconnected Not connected; the datasheet recommends grounding all NC pins.
11 A1 input I2C address input A1; must be connected to ground in SPI mode.
12 A0 input I2C address input A0; must be connected to ground in SPI mode.
13 VSS power_in Ground.
14 NC unconnected Not connected; the datasheet recommends grounding all NC pins.
15 VDD power_in Power supply, 2.8 V to 5.5 V (3.3 V typical), absolute maximum 6 V.
16 NC unconnected Not connected; the datasheet recommends grounding all NC pins.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer CONNTEK
Package QFN-16L(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Supply Voltage VDD_MAX -0.3 6 V 5
Maximum Digital IO Supply Voltage VDD_IO_MAX -0.3 6 V 5
Maximum Storage Temperature Tstorage 150 ℃ 5
Supply Voltage VDD 2.8 3.3 5.5 V 5
Digital IO Supply Voltage VDD_IO 1.8 V upper limit printed as VDD 5
Input High Level Voltage VIH 0.75 VDD_IO 5
Input Low Level Voltage VIL 0.25 VDD_IO 5
AQ2 Industrial Grade Operating Temperature TOPERATION -40 25 105 ℃ AQ2 Industrial Grade 5
Supply Voltage VDD 2.8 3.3 5.5 V 5
Measure Peak Current IDD,CONVXY 4.89 mA VDD=3.3V 5
Continuous Sensing Mode Standby Current IDD,STBY 61.7 μA 5
Wake-up & Sleep Mode Standby Current IDD,WAKE_STBY 2.4 μA 5
Idle State Current IDD,IDLE 1.4 μA 6
Magnetic Field Linear Range Mxy -130 130 mT Gain=20 6
Angular Output Noise NRMSAngle 0.98 Degree @B=20mT, magnOsr=0, digCtrl=0 6
Single axis magnetic field measurement time TCONVM 165 33349 μs programmable 6
Start Up Time Tstart 4 ms 6

CAD (KiCad official)

  • Symbol: KTH5702AQ2QNS
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16L(3x3) (KiCad packages3D, STEP)
  • 3D model files: kth5702aq2qns-etched.step / kth5702aq2qns-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); kth5702aq2qns.step / kth5702aq2qns.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: CONNTEK datasheet (30 pp, sha256 f60ec29a4160f417, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF