component
KTH4621AAM-ST6
Public Made by Adomby adom
CONNTEK Magnetic Angle Sensors, SOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
KTH4621AAM-ST6
CONNTEK · Magnetic Angle Sensors · SOT-23-6L
KTH4621AAM-ST6 from CONNTEK, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply, 2.5V to 5.5V operating range (6V absolute max), with a 1uF capacitor to GND placed close to this pin. |
| 2 | TEST | passive | Test pin; the datasheet function column lists it as ground (接地). |
| 3 | NC | unconnected | No-connect pin; the datasheet function column lists it as ground (接地). |
| 4 | OUT1 | output | NMOS open-drain latch output for the X axis on KTH4621A, goes low above BOP (25 Gs typ) and high below BRP. |
| 5 | GND | power_in | Ground. |
| 6 | OUT2 | output | NMOS open-drain latch output for the Y axis on KTH4621A, goes low above BOP (25 Gs typ) and high below BRP. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-6L |
| Category | Magnetic Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (operating) | VDD | 2.5 | 3.3 | 5.5 | V | 工作状态 (operating) | 8 |
| Output low voltage | VOL | 0.01 | 0.05 | V | IOUT=1mA | 8 | |
| Output high voltage | VOH | -0.15 | -0.1 | V | IOUT=1mA; printed as VDD-0.15 min, VDD-0.1 typ (relative to VDD) | 8 | |
| Average supply current | IDD(AVG) | 32.3 | uA | TA=+25℃, VDD=2.5V | 8 | ||
| Wake-up time | TAWAKE | 945 | μs | 工作状态 (operating) | 8 | ||
| Sampling frequency | FS | 30 | Hz | 工作状态 (operating) | 8 | ||
| Magnetic operate point | BOP | 25 | 40 | GS | South pole facing left, bottom or marked side (Fig 14-1); TA=25℃, VDD=3.3V | 9 | |
| Magnetic release point | BRP | -40 | -25 | GS | South pole facing left, bottom or marked side (Fig 14-1); TA=25℃, VDD=3.3V | 9 | |
| Magnetic hysteresis | BHY | 50 | GS | BHY=(/BOP - BRP/) | 9 | ||
| Supply voltage (abs max) | VDD | -0.3 | 6 | V | TA=25℃, referenced to GND | 7 | |
| Output drive current | IOUTPUT | 30 | mA | TA=25℃ | 7 | ||
| Storage temperature | TSTG | -50 | 150 | ℃ | 7 | ||
| Maximum junction temperature | TJ | 150 | ℃ | 7 | |||
| ESD HBM | ESD | -6000 | 6000 | V | HBM | 7 | |
| Supply voltage range (recommended) | VDD | 2.5 | 5.5 | V | 芯片工作 (operating) | 8 | |
| Operating temperature range | TA | -40 | 125 | oC | 芯片工作 (operating) | 8 |
CAD (KiCad official)
- Symbol:
KTH4621AAM-ST6 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
kth4621aam-st6-etched.step/kth4621aam-st6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kth4621aam-st6.step/kth4621aam-st6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (15 pp, sha256
a3e3aabd858be7d4, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KTH4621AAM-ST6
**CONNTEK** · Magnetic Angle Sensors · SOT-23-6L
KTH4621AAM-ST6 from CONNTEK, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply, 2.5V to 5.5V operating range (6V absolute max), with a 1uF capacitor to GND placed close to this pin. |
| 2 | TEST | passive | Test pin; the datasheet function column lists it as ground (接地). |
| 3 | NC | unconnected | No-connect pin; the datasheet function column lists it as ground (接地). |
| 4 | OUT1 | output | NMOS open-drain latch output for the X axis on KTH4621A, goes low above BOP (25 Gs typ) and high below BRP. |
| 5 | GND | power_in | Ground. |
| 6 | OUT2 | output | NMOS open-drain latch output for the Y axis on KTH4621A, goes low above BOP (25 Gs typ) and high below BRP. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-6L |
| Category | Magnetic Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (operating) | VDD | 2.5 | 3.3 | 5.5 | V | 工作状态 (operating) | 8 |
| Output low voltage | VOL | | 0.01 | 0.05 | V | IOUT=1mA | 8 |
| Output high voltage | VOH | -0.15 | -0.1 | | V | IOUT=1mA; printed as VDD-0.15 min, VDD-0.1 typ (relative to VDD) | 8 |
| Average supply current | IDD(AVG) | | 32.3 | | uA | TA=+25℃, VDD=2.5V | 8 |
| Wake-up time | TAWAKE | | 945 | | μs | 工作状态 (operating) | 8 |
| Sampling frequency | FS | | 30 | | Hz | 工作状态 (operating) | 8 |
| Magnetic operate point | BOP | | 25 | 40 | GS | South pole facing left, bottom or marked side (Fig 14-1); TA=25℃, VDD=3.3V | 9 |
| Magnetic release point | BRP | -40 | -25 | | GS | South pole facing left, bottom or marked side (Fig 14-1); TA=25℃, VDD=3.3V | 9 |
| Magnetic hysteresis | BHY | | 50 | | GS | BHY=(/BOP - BRP/) | 9 |
| Supply voltage (abs max) | VDD | -0.3 | | 6 | V | TA=25℃, referenced to GND | 7 |
| Output drive current | IOUTPUT | | | 30 | mA | TA=25℃ | 7 |
| Storage temperature | TSTG | -50 | | 150 | ℃ | | 7 |
| Maximum junction temperature | TJ | | | 150 | ℃ | | 7 |
| ESD HBM | ESD | -6000 | | 6000 | V | HBM | 7 |
| Supply voltage range (recommended) | VDD | 2.5 | | 5.5 | V | 芯片工作 (operating) | 8 |
| Operating temperature range | TA | -40 | | 125 | oC | 芯片工作 (operating) | 8 |
## CAD (KiCad official)
- Symbol: `KTH4621AAM-ST6`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6L (KiCad packages3D, STEP)
- 3D model files: `kth4621aam-st6-etched.step` / `kth4621aam-st6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `kth4621aam-st6.step` / `kth4621aam-st6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [CONNTEK datasheet](docs/kth4621aam-st6-datasheet.pdf) (15 pp, sha256 `a3e3aabd858be7d4`, retrieved 2026-10-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/kth4621aam-st6-datasheet.pdf)