component
KTH1701TU-ST3
Public Made by Adomby adom
CONNTEK Linear Hall Sensors, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownKTH1701TU-ST3
CONNTEK · Linear Hall Sensors · SOT-23-3L
KTH1701TU-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input operating from 1.8 V to 5.5 V, with a 1 µF capacitor recommended between VDD and ground placed as close to the pin as possible to filter noise. |
| 2 | OUTPUT | output | CMOS push-pull output that goes low when the magnetic induction exceeds BOP and returns high when it drops below BRP, with output drive current rated at 5 mA maximum. |
| 3 | GND | power_in | Ground reference for the supply and output of the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |
CAD (KiCad official)
- Symbol:
KTH1701TU-ST3 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
kth1701tu-st3-etched.step/kth1701tu-st3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kth1701tu-st3.step/kth1701tu-st3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (16 pp, sha256
7aa9f4c09f1db8d3, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).