KTH1701TL-ST3

{
  "schema_version": 1,
  "type": "component",
  "slug": "kth1701tl-st3",
  "title": "KTH1701TL-ST3",
  "brief": "CONNTEK Hall Switches, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "magnetic sensors",
    "kth1701tl-st3",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "KTH1701TL-ST3",
    "manufacturer": "CONNTEK",
    "package": "SOT-23-3L",
    "pin_count": 3,
    "category": "Magnetic Sensors",
    "subcategory": "Hall Switches",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758161669111996416",
    "parts": {
      "symbol": "kth1701tl-st3.kicad_sym",
      "footprint": "kth1701tl-st3.kicad_mod",
      "model_3d": "kth1701tl-st3-hero.glb",
      "model_3d_plain": "kth1701tl-st3-etched.glb",
      "model_3d_step": "kth1701tl-st3-etched.step",
      "model_3d_step_plain": "kth1701tl-st3.step",
      "lbr": "kth1701tl-st3.lbr"
    },
    "distributor_links": {
      "lcsc": "C5380472"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T15:32:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply input, operating range 1.8 V to 5.5 V; absolute maximum VDD is 6 V, and a 1 µF capacitor should be connected between VDD and GND, placed as close to the VDD pin as possible, to filter supply noise."
      },
      {
        "number": "2",
        "name": "OUTPUT",
        "type": "output",
        "description": "CMOS push-pull output that goes low when the field exceeds BOP and returns high when it falls below BRP, with VOL 0.15 V max and VOH VDD-0.15 V min at IOUT = 1 mA, and absolute maximum output drive current of 5 mA."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin; the 1 µF VDD-to-GND decoupling capacitor is to be connected to this pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one pinout for the SOT-23-3L package, which covers all SOT-23-3L variants includ; The output description is a summary of the electrical characteristics on page 6 (VOL/VOH at IOUT = 1"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0446,
        "at": "2026-10-18T15:30:50"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758161669111996416",
        "pages": 16,
        "sha256": "54c87cc0045a284a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "kth1701tl-st3.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "16964b14f93e6c778288a0c110b35f670fab733109c26f0da7dfc07cc3350040",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "kth1701tl-st3-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c74a37c5bd9d411176f0f5b4e384dbe0ce0b60739b47e9763d8fdf0f0c647bc6",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "CONNTEK",
      "Package": "SOT-23-3L",
      "Category": "Magnetic Sensors",
      "Pins": "3"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "54c87cc0045a284a25b13c64014d0e8c129eff08d24bf9fae7f0fd5727d3b4e9",
      "rows": [
        {
          "name": "供电电压范围 (recommended operating)",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 5.5,
          "conditions": "芯片工作",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "工作温度范围 (recommended operating)",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "oC",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "芯片工作",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "供电电压 (electrical, TX series)",
          "symbol": "VDD",
          "kind": "electrical",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 5.5,
          "conditions": "工作状态",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "输出低电平 (electrical, TX series)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.05,
          "max": 0.15,
          "conditions": "IOUT=1mA",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "供电电压 (absolute maximum)",
          "symbol": "VDD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "反向电源电压 (absolute maximum)",
          "symbol": "VDD_REV",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "输出驱动电流 (absolute maximum)",
          "symbol": "IOUTPUT",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "存储温度范围 (absolute maximum)",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "oC",
          "min": -50,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "结点最高耐温 (absolute maximum)",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "oC",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "人体模型ESD能力 (absolute maximum)",
          "symbol": "ESD HBM",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 8000,
          "conditions": "HBM",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "磁场工作点 (BOPS)",
          "symbol": "BOPS",
          "kind": "electrical",
          "unit": "Gauss",
          "min": 26,
          "typ": 36,
          "max": 46,
          "conditions": "TA=+25℃， VDD=1.8V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "磁场释放点 (BRPS)",
          "symbol": "BRPS",
          "kind": "electrical",
          "unit": "Gauss",
          "min": 10,
          "typ": 20,
          "max": 30,
          "conditions": "TA=+25℃， VDD=1.8V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "磁场工作点 (BOPN)",
          "symbol": "BOPN",
          "kind": "electrical",
          "unit": "Gauss",
          "min": -46,
          "typ": -36,
          "max": -26,
          "conditions": "TA=+25℃， VDD=1.8V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "磁场释放点 (BRPN)",
          "symbol": "BRPN",
          "kind": "electrical",
          "unit": "Gauss",
          "min": -30,
          "typ": -20,
          "max": -10,
          "conditions": "TA=+25℃， VDD=1.8V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "平均电流 (electrical, TX series)",
          "symbol": "IDD(AVG)",
          "kind": "electrical",
          "unit": "uA",
          "min": null,
          "typ": 2.4,
          "max": null,
          "conditions": "TA=+25℃， VDD=1.8V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "唤醒状态电流 (electrical, TX series)",
          "symbol": "IDD(Awake)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 2,
          "max": null,
          "conditions": "TA=+25℃， VDD=1.8V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "休眠状态电流 (electrical, TX series)",
          "symbol": "IDD(Sleep)",
          "kind": "electrical",
          "unit": "uA",
          "min": null,
          "typ": 0.4,
          "max": null,
          "conditions": "TA=+25℃， VDD=1.8V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "唤醒时间 (electrical, TX series)",
          "symbol": "TAWAKE",
          "kind": "electrical",
          "unit": "μs",
          "min": null,
          "typ": 10,
          "max": null,
          "conditions": "工作状态",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "周期 (electrical, TX series)",
          "symbol": "TPERIOD",
          "kind": "electrical",
          "unit": "ms",
          "min": null,
          "typ": 10,
          "max": null,
          "conditions": "工作状态",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "磁滞 (hysteresis, L series)",
          "symbol": "BHY",
          "kind": "electrical",
          "unit": "Gauss",
          "min": null,
          "typ": 16,
          "max": null,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "kth1701tl-st3"
  ],
  "discovery_pitch": "KTH1701TL-ST3 (CONNTEK) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "kth1701tl-st3.kicad_sym",
    "kth1701tl-st3.kicad_mod",
    "kth1701tl-st3.glb",
    "kth1701tl-st3.step",
    "kth1701tl-st3.lbr",
    "docs/hero.png",
    "docs/kth1701tl-st3-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "kth1701tl-st3-hero.glb",
    "kth1701tl-st3-hero.overlay.json",
    "kth1701tl-st3-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}