# KTH1701TL-ST3

**CONNTEK** · Hall Switches · SOT-23-3L

KTH1701TL-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, operating range 1.8 V to 5.5 V; absolute maximum VDD is 6 V, and a 1 µF capacitor should be connected between VDD and GND, placed as close to the VDD pin as possible, to filter supply noise. |
| 2 | OUTPUT | output | CMOS push-pull output that goes low when the field exceeds BOP and returns high when it falls below BRP, with VOL 0.15 V max and VOH VDD-0.15 V min at IOUT = 1 mA, and absolute maximum output drive current of 5 mA. |
| 3 | GND | power_in | Ground reference pin; the 1 µF VDD-to-GND decoupling capacitor is to be connected to this pin. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压范围 (recommended operating) | VDD | 1.8 |  | 5.5 | V | 芯片工作 | 5 |
| 工作温度范围 (recommended operating) | TA | -40 |  | 125 | oC | 芯片工作 | 5 |
| 供电电压 (electrical, TX series) | VDD | 1.8 |  | 5.5 | V | 工作状态 | 6 |
| 输出低电平 (electrical, TX series) | VOL |  | 0.05 | 0.15 | V | IOUT=1mA | 6 |
| 供电电压 (absolute maximum) | VDD |  |  | 6 | V |  | 5 |
| 反向电源电压 (absolute maximum) | VDD_REV | -0.3 |  |  | V |  | 5 |
| 输出驱动电流 (absolute maximum) | IOUTPUT |  |  | 5 | mA |  | 5 |
| 存储温度范围 (absolute maximum) | TSTG | -50 |  | 150 | oC |  | 5 |
| 结点最高耐温 (absolute maximum) | TJ |  |  | 150 | oC |  | 5 |
| 人体模型ESD能力 (absolute maximum) | ESD HBM |  |  | 8000 | V | HBM | 5 |
| 磁场工作点 (BOPS) | BOPS | 26 | 36 | 46 | Gauss | TA=+25℃， VDD=1.8V | 8 |
| 磁场释放点 (BRPS) | BRPS | 10 | 20 | 30 | Gauss | TA=+25℃， VDD=1.8V | 8 |
| 磁场工作点 (BOPN) | BOPN | -46 | -36 | -26 | Gauss | TA=+25℃， VDD=1.8V | 8 |
| 磁场释放点 (BRPN) | BRPN | -30 | -20 | -10 | Gauss | TA=+25℃， VDD=1.8V | 8 |
| 平均电流 (electrical, TX series) | IDD(AVG) |  | 2.4 |  | uA | TA=+25℃， VDD=1.8V | 6 |
| 唤醒状态电流 (electrical, TX series) | IDD(Awake) |  | 2 |  | mA | TA=+25℃， VDD=1.8V | 6 |
| 休眠状态电流 (electrical, TX series) | IDD(Sleep) |  | 0.4 |  | uA | TA=+25℃， VDD=1.8V | 6 |
| 唤醒时间 (electrical, TX series) | TAWAKE |  | 10 |  | μs | 工作状态 | 6 |
| 周期 (electrical, TX series) | TPERIOD |  | 10 |  | ms | 工作状态 | 7 |
| 磁滞 (hysteresis, L series) | BHY |  | 16 |  | Gauss |  | 8 |

## CAD (KiCad official)

- Symbol: `KTH1701TL-ST3`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `kth1701tl-st3-etched.step` / `kth1701tl-st3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `kth1701tl-st3.step` / `kth1701tl-st3.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [CONNTEK datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758161669111996416) (16 pp, sha256 `54c87cc0045a284a`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/kth1701tl-st3-datasheet.pdf)