component
KTH1701FH-ST3
Public Made by Adomby adom
CONNTEK Hall Switches, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownKTH1701FH-ST3
CONNTEK · Hall Switches · SOT-23-3L
KTH1701FH-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the operating supply range is 1.8 V to 5.5 V, and a 1 µF capacitor should be connected between VDD and ground as close to the VDD pin as possible to filter supply noise. |
| 2 | OUTPUT | output | CMOS push-pull switch output; the absolute maximum output drive current is 5 mA, and at IOUT = 1 mA the output low level is 0.15 V max and the output high level is VDD − 0.15 V min. |
| 3 | GND | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | 5.5 | V | Operating State | 9 | |
| Output Low Level | VOL | 0.05 | 0.15 | V | IOUT =1mA | 9 | |
| Magnetic Field Operating Point (South) | BOP S | 38 | 48 | 58 | Gauss | TA = +25 ◦C, VDD=1.8V | 11 |
| Magnetic Field Release Point (South) | BRP S | 18 | 28 | 38 | Gauss | TA = +25 ◦C, VDD=1.8V | 11 |
| Magnetic Field Operating Point (North) | BOP N | -58 | -48 | -38 | Gauss | TA = +25 ◦C, VDD=1.8V | 11 |
| Magnetic Field Release Point (North) | BRP N | -38 | -28 | -18 | Gauss | TA = +25 ◦C, VDD=1.8V | 11 |
| Supply Voltage | VDD | 6 | V | @TA = +25℃ | 8 | ||
| Reverse Power Voltage | VDD_REV | -0.3 | V | @TA = +25℃ | 8 | ||
| Output Drive Current | IOUTPUT | 5 | mA | @TA = +25℃ | 8 | ||
| Storage Temperature Range | TSTG | -50 | 150 | ◦C | @TA = +25℃ | 8 | |
| Maximum Junction Temperature | TJ | 150 | ◦C | @TA = +25℃ | 8 | ||
| HBM ESD Capability | ESD | 8000 | V | HBM | 8 | ||
| Supply Voltage Range | VDD | 1.8 | 5.5 | V | @TA = +25 ◦C, unless otherwise specified | 9 | |
| Operating Temperature Range | TA | -40 | 125 | ◦C | @TA = +25 ◦C, unless otherwise specified | 9 |
CAD (KiCad official)
- Symbol:
KTH1701FH-ST3 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
kth1701fh-st3-etched.step/kth1701fh-st3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kth1701fh-st3.step/kth1701fh-st3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (16 pp, sha256
7aa9f4c09f1db8d3, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).