main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs kth1601su-st3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers kth1601su-st3: viewers · Ray
kth1601su-st3-etched.fit.json kth1601su-st3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
kth1601su-st3-etched.glb kth1601su-st3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
kth1601su-st3-etched.step kth1601su-st3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
kth1601su-st3.glb Publish 0.1.0 · Ray
kth1601su-st3.kicad_mod Publish 0.1.0 · Ray
kth1601su-st3.kicad_sym Publish 0.1.0 · Ray
kth1601su-st3.lbr Publish 0.1.0 · Ray
kth1601su-st3.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json kth1601su-st3: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md kth1601su-st3: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

KTH1601SU-ST3

CONNTEK · Hall Sensor · SOT-23-3L

KTH1601SU-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input. Operating range 1.6V to 5.5V, absolute maximum 6V. A 1uF CIN decoupling capacitor should be placed close to this pin for stability and noise immunity.
2 OUTPUT output Push-pull digital Hall switch output. Drives low (VOL ≈ 0.05V typ at 1mA) when magnetic flux density exceeds BOP; drives high (VOH ≈ VDD-0.05V at 1mA) when flux falls below BRP. Maximum output current 5mA. No external pull-up required.
3 GND power_in Ground reference pin (0V).

Key specifications

Parameter Value
Manufacturer CONNTEK
Package SOT-23-3L
Category Sensor
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • KTH1601SU-ST3
  • KTH1601SU-ST3SF5
  • KTH1601SU-ST3TO3

CAD (KiCad official)

  • Symbol: KTH1601SU-ST3
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3L (KiCad packages3D, STEP)
  • 3D model files: kth1601su-st3-etched.step / kth1601su-st3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); kth1601su-st3.step / kth1601su-st3.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
kth1601su-st3.step 59 KB You want the bare part, or you mark your own boards.
kth1601su-st3-etched.step 2.1 MB You want the part with KTH1601SU-ST3 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 526 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: CONNTEK datasheet (14 pp, sha256 d2c8ce5c6d689457, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF