component
KTA333-ST5
Public Made by Adomby adom
CONNTEK Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| kta333-st5-etched.glb | 7d ago |
| kta333-st5-etched.step | 7d ago |
| kta333-st5-hero.glb | 7d ago |
| kta333-st5-hero.overlay.json | 7d ago |
| kta333-st5.glb | 7d ago |
| kta333-st5.kicad_mod | 7d ago |
| kta333-st5.kicad_sym | 7d ago |
| kta333-st5.lbr | 7d ago |
| kta333-st5.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
KTA333-ST5
CONNTEK · Operational Amplifier · SOT-23-5
KTA333-ST5 from CONNTEK, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output that swings within 100 mV of the supply rails with a 10 kΩ load. |
| 2 | V- | power_in | Negative supply (lowest potential), used with 1.8 V to 5.5 V single supply or ±0.9 V to ±2.75 V dual supply. |
| 3 | IN+ | input | Non-inverting input whose common-mode range extends 100 mV beyond the supply rails, and input currents above 10 mA can cause permanent damage, so an input resistor is recommended. |
| 4 | IN- | input | Inverting input with the same common-mode range of 100 mV beyond the supply rails, and input currents above 10 mA can cause permanent damage. |
| 5 | V+ | power_in | Positive supply (highest potential), with absolute maximum supply voltage of 6.5 V and a 0.1 µF bypass capacitor recommended close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 2 | 10 | μV | Vs=5V | 5 | |
| Input offset voltage drift | dVOS/dT | 0.02 | 0.05 | μV/℃ | TA= -40°C 至 125°C | 5 | |
| Input bias current | IB | -100 | 100 | pA | 5 | ||
| Input offset current | IOS | -120 | 120 | pA | 5 | ||
| Output swing relative to supply rail | 30 | 70 | mV | RL=10K | 5 | ||
| Short-circuit current | ISC | -17 | 17 | mA | 5 | ||
| Rated supply voltage range | VS | 1.8 | 5.5 | V | 5 | ||
| Power supply rejection ratio | PSRR | 1 | 5 | μV/V | VS=1.8V 至 5.5V，TA= -40°C 至 125°C | 5 | |
| Supply voltage (absolute maximum) | 6.5 | V | 4 | ||||
| Operating junction temperature (absolute maximum) | TJ | 150 | ℃ | 4 | |||
| Storage temperature | Tstg | -65 | 150 | ℃ | 4 | ||
| Supply voltage (recommended) | 1.8 | 5.5 | V | 4 | |||
| Rated ambient temperature range | -40 | 125 | ℃ | 4 | |||
| Common-mode rejection ratio | CMRR | 120 | dB | (V-), 0.1V < VCM < (V+) + 0.1V，TA = -40°C 至 125°C | 5 | ||
| Open-loop voltage gain | AOL | 120 | dB | (V-) + 100mV < VO < (V+), 100mV，RL = 10kΩ，TA = -40°C 至 125°C | 5 | ||
| Quiescent current (single op amp) | IQ | 17 | μA | IO=0A，TA= -40°C 至 125°C（单运放） | 5 | ||
| Gain bandwidth product | GBW | 350 | KHz | CL=100pF | 5 | ||
| Slew rate | SR | 0.16 | V/μs | G=1 | 5 | ||
| Input voltage noise (peak-to-peak) | 1.1 | μVPP | F=0.1Hz 至 10Hz | 5 | |||
| Turn-on time | 200 | μs | VS=+5V | 5 |
CAD (KiCad official)
- Symbol:
KTA333-ST5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
kta333-st5-etched.step/kta333-st5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kta333-st5.step/kta333-st5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (17 pp, sha256
ecce479844f8b3c0, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).