Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

KSZ9563RNXC

Microchip Tech · Ethernet ICs · QFN-64(8x8)

KSZ9563RNXC from Microchip Tech, in a QFN-64(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXRX1P_B bidirectional Port 1 1000BASE-T differential data pair B (+); 100BASE-TX and 10BASE-T are also supported on the A and B pairs.
2 TXRX1M_B bidirectional Port 1 1000BASE-T differential data pair B (-); 100BASE-TX and 10BASE-T are also supported on the A and B pairs.
3 TXRX1P_C bidirectional Port 1 1000BASE-T differential data pair C (+).
4 TXRX1M_C bidirectional Port 1 1000BASE-T differential data pair C (-).
5 AVDDL power_in +1.2V analog power.
6 TXRX1P_D bidirectional Port 1 1000BASE-T differential data pair D (+).
7 TXRX1M_D bidirectional Port 1 1000BASE-T differential data pair D (-).
8 AVDDH power_in +3.3V or +2.5V analog power.
9 TXRX2P_A bidirectional Port 2 1000BASE-T differential data pair A (+); 100BASE-TX and 10BASE-T are also supported on the A and B pairs.
10 TXRX2M_A bidirectional Port 2 1000BASE-T differential data pair A (-); 100BASE-TX and 10BASE-T are also supported on the A and B pairs.
11 AVDDL power_in +1.2V analog power.
12 TXRX2P_B bidirectional Port 2 1000BASE-T differential data pair B (+); 100BASE-TX and 10BASE-T are also supported on the A and B pairs.
13 TXRX2M_B bidirectional Port 2 1000BASE-T differential data pair B (-); 100BASE-TX and 10BASE-T are also supported on the A and B pairs.
14 TXRX2P_C bidirectional Port 2 1000BASE-T differential data pair C (+).
15 TXRX2M_C bidirectional Port 2 1000BASE-T differential data pair C (-).
16 AVDDL power_in +1.2V analog power.
17 TXRX2P_D bidirectional Port 2 1000BASE-T differential data pair D (+).
18 TXRX2M_D bidirectional Port 2 1000BASE-T differential data pair D (-).
19 AVDDH power_in +3.3V or +2.5V analog power.
20 DVDDL power_in +1.2V digital power.
21 RXD3 bidirectional Port 3 receive data bit 3 in MII/RGMII modes (not used in RMII, do not connect), also sampled as a configuration strap (RXD3/RXD2 select the xMII mode) at reset.
22 RXD2 bidirectional Port 3 receive data bit 2 in MII/RGMII modes (not used in RMII, do not connect), also sampled as a configuration strap (RXD3/RXD2 select the xMII mode) at reset.
23 RXD1 bidirectional Port 3 receive data bit 1 in MII/RMII/RGMII modes, also sampled as a configuration strap (RXD1/RXD0 select the serial interface mode) at reset.
24 RXD0 bidirectional Port 3 receive data bit 0 in MII/RMII/RGMII modes, also sampled as a configuration strap (RXD1/RXD0 select the serial interface mode) at reset.
25 RX_CLK/REFCLKO bidirectional Port 3 receive clock (25/2.5MHz in MII, input in MAC mode and output in PHY mode; 125/25/2.5MHz output in RGMII) or 50MHz RMII reference clock output in RMII Clock mode.
26 VDDIO power_in +3.3V, +2.5V or +1.8V I/O power.
27 RX_DV/CRS_DV/RX_CTL bidirectional Port 3 received data valid (MII), carrier sense/receive data valid (RMII) or receive control (RGMII) output, also sampled as the Normal/Factory Test Mode strap at reset.
28 RX_ER bidirectional Port 3 receive error output in MII mode (not used in RMII/RGMII, do not connect), also sampled as a strap (with PME_N, selects Ports 1 and 2 PHY configuration) at reset.
29 TXD3 input Port 3 transmit data bit 3 in MII/RGMII modes (not used in RMII, do not connect), with internal pull-down.
30 TXD2 input Port 3 transmit data bit 2 in MII/RGMII modes (not used in RMII, do not connect), with internal pull-down.
31 TXD1 input Port 3 transmit data bit 1 in MII/RMII/RGMII modes, with internal pull-down.
32 TXD0 input Port 3 transmit data bit 0 in MII/RMII/RGMII modes, with internal pull-down.
33 TX_CLK/REFCLKI bidirectional Port 3 transmit clock (25/2.5MHz in MII, output in PHY mode and input in MAC mode; 125/25/2.5MHz input in RGMII) or 50MHz RMII reference clock input in RMII Normal mode.
34 DVDDL power_in +1.2V digital power.
35 TX_EN/TX_CTL input Port 3 transmit enable (MII/RMII) or transmit control (RGMII) input, with internal pull-down.
36 TX_ER input Port 3 transmit error input in MII mode (not used in RMII/RGMII, do not connect), with internal pull-down.
37 DVDDL power_in +1.2V digital power.
38 VDDIO power_in +3.3V, +2.5V or +1.8V I/O power.
39 GPIO_1 bidirectional General purpose I/O synchronized to the IEEE 1588 clock, programmable as an input for timestamp capture or an output for event trigger.
40 GPIO_2 bidirectional General purpose I/O synchronized to the IEEE 1588 clock, programmable as an input for timestamp capture or an output for event trigger.
41 DVDDL power_in +1.2V digital power.
42 LED2_0 bidirectional Port 2 LED indicator 0, active-low output that sinks current to light an external LED, also sampled as the Port 3 MII/RMII mode strap at reset.
43 LED2_1 bidirectional Port 2 LED indicator 1, active-low output that sinks current to light an external LED, also sampled as the Port 3 speed select strap at reset.
44 PME_N bidirectional Power management event output signaling an energy detect event (default active low, polarity programmable, external pull-up required for active-low or pull-down for active-high), also sampled as a strap (with RX_ER) at reset.
45 INTRP_N output Active-low open-drain interrupt output that requires an external pull-up resistor.
46 RESET_N input Active-low system reset; the device must be reset during or after power-on and an RC circuit is suggested for power-on reset.
47 SDO bidirectional SPI mode data out (MISO), not used in I2C/MIIM modes, also sampled as the Normal/Factory Test Mode strap at reset.
48 SDI/SDA/MDIO bidirectional SPI data in (MOSI), I2C SDA or MIIM MDIO data; SDA and MDIO are open-drain and need an external pull-up to VDDIO (1.0kΩ to 5kΩ).
49 SCS_N input SPI mode active-low chip select, not used in I2C/MIIM modes.
50 SCL/MDC input SPI/I2C serial clock (SCL) or MIIM serial clock (MDC).
51 DVDDL power_in +1.2V digital power.
52 LED1_0 bidirectional Port 1 LED indicator 0, active-low output that sinks current to light an external LED, also sampled as the Switch Enable at Startup strap at reset.
53 LED1_1 bidirectional Port 1 LED indicator 1, active-low output that sinks current to light an external LED, also sampled as the In-Band Management strap at reset.
54 VDDIO power_in +3.3V, +2.5V or +1.8V I/O power.
55 DVDDL power_in +1.2V digital power.
56 AVDDL power_in +1.2V analog power.
57 XO output Crystal clock output connected to one lead of the 25MHz crystal, left unconnected when using a 2.5V oscillator.
58 XI input Crystal clock/oscillator input: one lead of the 25MHz crystal (±50ppm tolerance) or the input from a 2.5V oscillator.
59 GND power_in Ground.
60 ISET passive Transmit output current set pin that must be connected to GND through a 6.04kΩ 1% resistor.
61 AVDDH power_in +3.3V or +2.5V analog power.
62 TXRX1P_A bidirectional Port 1 1000BASE-T differential data pair A (+); 100BASE-TX and 10BASE-T are also supported on the A and B pairs.
63 TXRX1M_A bidirectional Port 1 1000BASE-T differential data pair A (-); 100BASE-TX and 10BASE-T are also supported on the A and B pairs.
64 AVDDL power_in +1.2V analog power.
65 VSS (exposed pad) power_in Exposed pad on bottom of package that must be connected to ground with a via field.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-64(8x8)
Category Communication Interface Chip/UART/485/232
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (AVDDL, DVDDL) -0.5 1.8 V 195
Supply Voltage (AVDDH, VDDIO) -0.5 5 V 195
Input Voltage (all inputs) -0.5 5 V 195
Output Voltage (all outputs) -0.5 5 V 195
Maximum current sunk/sourced by any I/O pin 50 mA 195
Lead Temperature (soldering, 10 sec.) 260 oC soldering, 10 sec. 195
Storage Temperature (TS) TS -55 150 oC 195
Maximum Junction Temperature (TJ) TJ 125 oC 195
HBM ESD Performance -6 6 kV HBM 195
Supply Voltage (AVDDL, DVDDL) 1.14 1.26 V 195
Supply Voltage (AVDDH @ 3.3V) 3.135 3.465 V @ 3.3V 195
Supply Voltage (AVDDH @ 2.5V) 2.375 2.625 V @ 2.5V 195
Supply Voltage (VDDIO @ 3.3V) 3.135 3.465 V @ 3.3V 195
Supply Voltage (VDDIO @ 2.5V) 2.375 2.625 V @ 2.5V 195
Supply Voltage (VDDIO @ 1.8V) 1.71 1.89 V @ 1.8V 195
Junction to Case Characterization (JT) JT 0.1 oC/W Note 6-2; 0 m/s air velocity 195
Junction to Case Resistance (JC) JC 1.3 oC/W 195
Input High Voltage VIH 2.1 V VDDIO = 3.3V 197
Input High Voltage VIH 1.7 V VDDIO = 2.5V 197
Input High Voltage VIH 1.3 V VDDIO = 1.8V 197
Input Low Voltage VIL 0.9 V VDDIO = 3.3V 197
Input Low Voltage VIL 0.6 V VDDIO = 1.8V 197
Output High Voltage (O8) VOH 2.4 V IOH = 8 mA; VDDIO = 3.3V 197
Output High Voltage (O8) VOH 1.9 V IOH = 8 mA; VDDIO = 2.5V 197
Output High Voltage (O8) VOH 1.5 V IOH = 6 mA; VDDIO = 1.8V 197
Output Low Voltage (O8) VOL 0.4 V IOL = 8 mA; VDDIO = 3.3V 197
Output Low Voltage (O8) VOL 0.2 V IOL = 6 mA; VDDIO = 1.8V 197
Input Current IIN -10 10 µA VIN = GND ~ VDDIO 197
Output Tri-State Leakage (O8) IOZ 10 µA VIN = GND ~ VDDIO 197
Output Tri-State Leakage (O24) IOZ 10 µA VIN = GND ~ VDDIO 197
Peak Differential Output (100BASE-TX) VO 0.95 1.05 V 100Ω termination on the differential output 197
Output Voltage Imbalance Vimb 2 % 100Ω termination on the differential output 197
Rise/Fall Time tr, tf 3 5 ns 197
Rise/Fall Time Imbalance 0 0.5 ns 197
Duty cycle Distortion -0.25 0.25 ns 197
Overshoot 5 % 197
Peak Differential Output Voltage (10BASE-T) Vp 2.2 2.5 2.8 V 100Ω termination on the differential output 198
Supply current - Full 1000 Mbps operation - AVDDH supply current IDD_AH 140 mA AVDDH @ 2.5V; VDDIO @ 3.3V; Ports 1-2 in 1000BASE-T; Port 3 in RGMII (1000 Mbps); All ports 100% utilization 196
Supply current - Full 1000 Mbps operation - VDDIO supply current IDD_IO 35 mA 196
Supply current - Full 1000 Mbps operation - AVDDL supply current IDD_CA 190 mA 196
Supply current - Full 1000 Mbps operation - DVDDL supply current IDD_CD 250 mA 196
Supply current - Energy Detect Mode - AVDDH supply current IDD_AH 15 mA AVDDH @ 2.5V; VDDIO @ 3.3V 196
Supply current - Energy Detect Mode - VDDIO supply current IDD_IO 15 mA 196
Supply current - Energy Detect Mode - AVDDL supply current IDD_CA 15 mA 196
Supply current - Energy Detect Mode - DVDDL supply current IDD_CD 50 mA 196
Supply current - Global Soft Power Down - AVDDH supply current IDD_AH 2 mA AVDDH @ 2.5V; VDDIO @ 3.3V 197
Supply current - Global Soft Power Down - VDDIO supply current IDD_IO 8 mA 197
Supply current - Global Soft Power Down - AVDDL supply current IDD_CA 0.5 mA 197
Supply current - Global Soft Power Down - DVDDL supply current IDD_CD 4 mA 197
Data to clock output skew TSKEW 1.2 2 ns 199
Clock cycle duration TCYC 7.2 8 8.8 ns 199
1000Mbps duty cycle Duty_G 45 50 55 % 199
10/100Mbps duty cycle Duty_T 40 50 60 % 199

CAD (KiCad official)

  • Symbol: KSZ9563RNXC
  • Footprint: Package_DFN_QFN:QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm
  • 3D model: QFN-64(8x8) (KiCad packages3D, STEP)
  • 3D model files: ksz9563rnxc-etched.step / ksz9563rnxc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz9563rnxc.step / ksz9563rnxc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (226 pp, sha256 91fb82ad58c03267, retrieved 2026-11-09, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF