main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ksz9131rnxi-tr: symbol repaired (body fitted to the names) · Ray
ksz9131rnxi-tr-etched.glb Publish 0.1.0 · Ray
ksz9131rnxi-tr-etched.step ksz9131rnxi-tr: factory component page (tier=mfr) · Ray
ksz9131rnxi-tr-hero.glb ksz9131rnxi-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
ksz9131rnxi-tr-hero.overlay.json Publish 0.1.0 · Ray
ksz9131rnxi-tr.glb Publish 0.1.0 · Ray
ksz9131rnxi-tr.kicad_mod Publish 0.1.0 · Ray
ksz9131rnxi-tr.kicad_sym ksz9131rnxi-tr: symbol repaired (body fitted to the names) · Ray
ksz9131rnxi-tr.lbr ksz9131rnxi-tr: symbol repaired (body fitted to the names) · Ray
ksz9131rnxi-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 49 pins · Ray

KSZ9131RNXI-TR

Microchip Tech · Buffer/Driver/Transceiver · QFN-48(7x7)

KSZ9131RNXI-TR from Microchip Tech, in a QFN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVDDH power_in Provides the +2.5/3.3V analog power supply for the transceiver.
2 TXRXP_A bidirectional Media Dependent Interface[0] positive differential signal; it is BI_DA+ in 1000BASE-T and TX+ (MDI) or RX+ (MDI-X) in 10/100 modes.
3 TXRXM_A bidirectional Media Dependent Interface[0] negative differential signal; it is BI_DA- in 1000BASE-T and TX- (MDI) or RX- (MDI-X) in 10/100 modes.
4 AVDDL power_in Provides the +1.2V analog power supply for the core.
5 TXRXP_B bidirectional Media Dependent Interface[1] positive differential signal; it is BI_DB+ in 1000BASE-T and RX+ (MDI) or TX+ (MDI-X) in 10/100 modes.
6 TXRXM_B bidirectional Media Dependent Interface[1] negative differential signal; it is BI_DB- in 1000BASE-T and RX- (MDI) or TX- (MDI-X) in 10/100 modes.
7 TXRXP_C bidirectional Media Dependent Interface[2] positive differential signal; it is BI_DC+ in 1000BASE-T and not used in 10/100 modes.
8 TXRXM_C bidirectional Media Dependent Interface[2] negative differential signal; it is BI_DC- in 1000BASE-T and not used in 10/100 modes.
9 AVDDL power_in Provides the +1.2V analog power supply for the core.
10 TXRXP_D bidirectional Media Dependent Interface[3] positive differential signal; it is BI_DD+ in 1000BASE-T and not used in 10/100 modes.
11 TXRXM_D bidirectional Media Dependent Interface[3] negative differential signal; it is BI_DD- in 1000BASE-T and not used in 10/100 modes.
12 AVDDH power_in Provides the +2.5/3.3V analog power supply for the transceiver.
13 NC unconnected Not bonded internally; leave unconnected, or connect to ground for footprint compatibility with older devices.
14 NC unconnected Not bonded internally; leave unconnected, or connect to DVDDL power for footprint compatibility with older devices.
15 LED2/PHYAD1 bidirectional Programmable LED2 output (VO8) that also serves as the PHYAD1 strap input, sampled at power-up/reset.
16 DVDDH power_in Provides the +3.3/2.5/1.8V variable I/O digital power supply.
17 LED1/PME_N1/PHYAD0 bidirectional Programmable LED1 output (VO8) that also serves as the PME_N1 power management event output and the PHYAD0 strap input.
18 DVDDL power_in Provides the +1.2V digital core power supply.
19 TXD0 input RGMII transmit data bit 0 from the MAC to the PHY, with variable voltage input levels.
20 TXD1 input RGMII transmit data bit 1 from the MAC to the PHY, with variable voltage input levels.
21 TXD2 input RGMII transmit data bit 2 from the MAC to the PHY, with variable voltage input levels.
22 TXD3 input RGMII transmit data bit 3 from the MAC to the PHY, with variable voltage input levels.
23 DVDDL power_in Provides the +1.2V digital core power supply.
24 TXC input RGMII transmit reference clock from the MAC, used to latch data into the PHY, at 125 MHz for 1000BASE-T, 25 MHz for 100BASE-TX and 2.5 MHz for 10BASE-T.
25 TX_CTL input RGMII transmit control input carrying the transmit enable (TXEN) and transmit error (TXER) functions per the RGMII specification.
26 DVDDL power_in Provides the +1.2V digital core power supply.
27 RXD3/MODE3 output RGMII receive data bit 3 to the MAC (VO24 drive), which doubles as the MODE3 strap input sampled at reset.
28 RXD2/MODE2 output RGMII receive data bit 2 to the MAC (VO24 drive), which doubles as the MODE2 strap input sampled at reset.
29 VSS power_in Digital ground for the device.
30 DVDDL power_in Provides the +1.2V digital core power supply.
31 RXD1/MODE1 output RGMII receive data bit 1 to the MAC (VO24 drive), which doubles as the MODE1 strap input sampled at reset.
32 RXD0/MODE0 output RGMII receive data bit 0 to the MAC (VO24 drive), which doubles as the MODE0 strap input sampled at reset.
33 RX_CTL/CLK125_EN output RGMII receive control to the MAC carrying receive data valid (RXDV) and receive error (RXER), which doubles as the CLK125_EN strap input sampled at reset.
34 DVDDH power_in Provides the +3.3/2.5/1.8V variable I/O digital power supply.
35 RXC/PHYAD2 output RGMII receive reference clock from the PHY to the MAC (125 MHz for 1000BASE-T, 25 MHz for 100BASE-TX, 2.5 MHz for 10BASE-T), which doubles as the PHYAD2 strap input.
36 MDC input Management clock input from the MAC for the MDC/MDIO interface, with a pull-up.
37 MDIO bidirectional Management data to and from the MAC, which requires an external pull-up resistor to DVDDH in the range of 1.0 kOhm to 4.7 kOhm.
38 INT_N/PME_N2/ALLPHYAD output Programmable active-low interrupt output (VO8) that can also serve as the PME_N2 wake-on-LAN output and the ALLPHYAD strap input.
39 DVDDL power_in Provides the +1.2V digital core power supply.
40 DVDDH power_in Provides the +3.3/2.5/1.8V variable I/O digital power supply.
41 CLK125_NDO/LED_MODE output 125 MHz reference clock output (VO24) for the MAC, which doubles as the LED_MODE strap input sampled at reset.
42 RESET_N input Active-low chip reset; configuration straps are latched on the rising edge of RESET_N, with a minimum assertion time of 1 us.
43 LDO_O output On-chip 1.2V LDO controller output that drives the gate of an external P-channel MOSFET for the core; it can be left unconnected if the system supplies 1.2V.
44 AVDDL_PLL power_in Provides the +1.2V analog PLL power supply.
45 XO output Crystal oscillator output connected to one lead of a 25 MHz crystal; leave unconnected when using an external oscillator.
46 XI input Crystal oscillator input for a 25 MHz crystal, or the clock input from an external oscillator with a tolerance of +/-50 ppm.
47 NC unconnected Not bonded internally; leave unconnected, or connect to AVDDH power for footprint compatibility with older devices.
48 ISET input PHY bias resistor pin that must be connected to ground through a 6.04 kOhm 1% resistor.
49 P_VSS passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-48(7x7)
Category Logic ICs
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High Input Level (ICLK) VIH 2 V ICLK input buffer; Note 6-3 124
Low Input Level (ICLK) VIL 0.5 V ICLK input buffer; Note 6-3 124
Input Leakage (ICLK) IIH -10 10 µA ICLK input buffer; Note 6-3 124
Supply Voltage (DVDDL, AVDDL, AVDDL_PLL) VIN -0.5 1.8 V 121
Supply Voltage (AVDDH) VIN -0.5 5 V 121
Supply Voltage (DVDDH) VIN -0.5 5 V 121
Input Voltage (all inputs) -0.5 5 V 121
Output Voltage (all outputs) -0.5 5 V 121
Lead Temperature (soldering) 260 °C soldering, 10s 121
Storage Temperature TS -55 150 °C 121
HBM ESD Performance -5 5 kV HBM ESD Performance 121
Supply Voltage (DVDDL, AVDDL, AVDDL_PLL) 1.14 1.32 V 121
Supply Voltage (AVDDH @ 3.3V) 3.135 3.63 V Note 6-1 121
Supply Voltage (AVDDH @ 2.5V) 2.375 2.75 V 121
Supply Voltage (DVDDH @ 3.3V) 3.135 3.63 V Note 6-2 121
Supply Voltage (DVDDH @ 2.5V) 2.375 2.75 V 121
Supply Voltage (DVDDH @ 1.8V) 1.71 1.98 V 121
Input voltage (all inputs) -0.3 3.63 V 121
Output voltage (all outputs) -0.3 3.63 V 121
Ambient Temperature (TA Industrial) TA -40 85 °C TA Industrial: KSZ9131RNXI 121
Maximum Junction Temperature (TJ max.) TJ 125 °C 121
Junction-to-Ambient (0 m/s) JA 31 °C/W 0 Meters/second 122
Junction-to-Ambient (1 m/s) JA 27 °C/W 1 Meters/second 122
Junction-to-Ambient (2.5 m/s) JA 24 °C/W 2.5 Meters/second 122
Junction-to-Top-of-Package JT 0.3 °C/W 0 Meters/second 122
Junction-to-Board JB 16 °C/W 0 Meters/second 122
Junction-to-Case JC 3.5 °C/W 122
Junction-to-Board JB 17 °C/W 122
Maximum Power Dissipation PMAX 663 mW 1000BASE-T Traffic, 3.3V I/O 122
Peak Differential Output Voltage (1000BASE-T) VOP 670 820 mV IEEE 802.3 clause 40.6.1.2.1; Note 6-5 125
Transmitter Peak Differential Output Voltage (10BASE-T) VOUT 2.2 2.5 2.8 V IEEE 802.3 clause 14.3.1.2.1; Note 6-11 126
Receiver Differential Squelch Threshold VDS 300 400 mV IEEE 802.3 clause 14.3.1.3.2; Note 6-13 126
Output drive range for LDO_O to gate input of P-channel MOSFET (AVDDH = 3.3V) VLDO_O 1.2 3.11 V AVDDH = 3.3V for MOSFET source voltage 127
Output drive range for LDO_O to gate input of P-channel MOSFET (AVDDH = 2.5V) VLDO_O 1.2 2 V AVDDH = 2.5V for MOSFET source voltage 127
Output of P-channel MOSFET 1.23 1.25 1.32 V 127
MDC period tclkp 120 400 ns Note 6-24; Note 6-25 134
MDC high time tclkh 40 ns 134
MDC low time tclkl 40 ns 134
MDIO (read from PHY) output valid from rising edge of MDC tval 80 ns 134
MDIO (read from PHY) output hold from rising edge of MDC tohold 0 ns 134
MDIO (write to PHY) input setup time to rising edge of MDC tsu 8 ns 134
MDIO (write to PHY) input hold time after rising edge of MDC tihold 8 ns 134
Frequency Tolerance @ 25°C Ftol -50 50 PPM @25°C; Note 6-26 135
Frequency Stability Over Temp Ftemp -50 50 PPM Note 6-26 135
Total Allowable PPM Budget -50 50 PPM Note 6-28 135
Frequency (fundamental) Ffund 25 MHz Fundamental Mode 135
Shunt Capacitance CO 6 pF 135
Load Capacitance CL 25 pF 135

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing abs slicer error for 1000BASE-T is +/-32. The largest instantaneous slicer error for 100BASE-TX is +/-64. A higher absolute 45

CAD (KiCad official)

  • Symbol: KSZ9131RNXI-TR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: QFN-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: ksz9131rnxi-tr-etched.step / ksz9131rnxi-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz9131rnxi-tr.step / ksz9131rnxi-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (149 pp, sha256 9ec682b1f60624f7, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF