main
History Download
Ray Publish 0.1.0 3c0a314

KSZ9131MNXI

Microchip Tech · Buffer/Driver/Transceiver · QFN-64(8x8)

KSZ9131MNXI from Microchip Tech, in a QFN-64(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVDDH power_in +2.5/3.3V analog (transceiver) power supply.
2 TXRXP_A bidirectional Media Dependent Interface[0] positive differential signal (BI_DA+ in 1000BT; TX+/RX+ in 10/100BT depending on MDI/MDI-X).
3 TXRXM_A bidirectional Media Dependent Interface[0] negative differential signal (BI_DA- in 1000BT; TX-/RX- in 10/100BT depending on MDI/MDI-X).
4 AVDDL power_in +1.2V analog power supply.
5 AVDDL power_in +1.2V analog power supply.
6 NC unconnected No connect; for normal operation this pin should be left unconnected.
7 TXRXP_B bidirectional Media Dependent Interface[1] positive differential signal (BI_DB+ in 1000BT; RX+/TX+ in 10/100BT depending on MDI/MDI-X).
8 TXRXM_B bidirectional Media Dependent Interface[1] negative differential signal (BI_DB- in 1000BT; RX-/TX- in 10/100BT depending on MDI/MDI-X).
9 AGNDH power_in Analog ground high.
10 TXRXP_C bidirectional Media Dependent Interface[2] positive differential signal (BI_DC+ in 1000BT; not used in 10BT/100BT).
11 TXRXM_C bidirectional Media Dependent Interface[2] negative differential signal (BI_DC- in 1000BT; not used in 10BT/100BT).
12 AVDDL power_in +1.2V analog power supply.
13 AVDDL power_in +1.2V analog power supply.
14 TXRXP_D bidirectional Media Dependent Interface[3] positive differential signal (BI_DD+ in 1000BT; not used in 10BT/100BT).
15 TXRXM_D bidirectional Media Dependent Interface[3] negative differential signal (BI_DD- in 1000BT; not used in 10BT/100BT).
16 AVDDH power_in +2.5/3.3V analog (transceiver) power supply.
17 LED2/PHYAD1 bidirectional Programmable LED2 output (VO8) that also serves as the PHY address bit 1 strap input latched at power-up/reset.
18 DVDDH power_in +3.3/2.5/1.8V variable I/O digital power supply.
19 LED1/PME_N1/PHYAD0 bidirectional Programmable LED1 output or PME_N1 wake-on-LAN event output (active low) that also serves as the PHY address bit 0 strap input latched at power-up/reset.
20 DVDDL power_in +1.2V digital core power supply input.
21 TXD0 input GMII/MII transmit data bit 0 from the MAC (internal pull-down).
22 TXD1 input GMII/MII transmit data bit 1 from the MAC (internal pull-down).
23 TXD2 input GMII/MII transmit data bit 2 from the MAC (internal pull-down).
24 TXD3 input GMII/MII transmit data bit 3 from the MAC (internal pull-down).
25 DVDDL power_in +1.2V digital core power supply input.
26 TXD4 input GMII transmit data bit 4 from the MAC, not used in MII mode and requiring an external pull-down if not driven.
27 TXD5 input GMII transmit data bit 5 from the MAC, not used in MII mode and requiring an external pull-down if not driven.
28 TXD6 input GMII transmit data bit 6 from the MAC, not used in MII mode and requiring an external pull-down if not driven.
29 TXD7 input GMII transmit data bit 7 from the MAC, not used in MII mode and requiring an external pull-down if not driven.
30 DVDDH power_in +3.3/2.5/1.8V variable I/O digital power supply.
31 TX_ER input Transmit error input indicating a transmit error during frame transmission and requesting Low Power Idle for EEE, to be tied low if the MAC does not provide it.
32 GTX_CLK input GMII transmit reference clock input, not used in MII mode and requiring an external pull-down if not driven.
33 TX_EN input Transmit enable input indicating the presence of valid data on TXD[7:0].
34 RXD7 output GMII receive data bit 7 output to the MAC, driven low in MII mode.
35 RXD6 output GMII receive data bit 6 output to the MAC, driven low in MII mode.
36 DVDDL power_in +1.2V digital core power supply input.
37 RXD5 output GMII receive data bit 5 output to the MAC, driven low in MII mode.
38 RXD4 output GMII receive data bit 4 output to the MAC, driven low in MII mode.
39 RXD3/MODE3 bidirectional Receive data bit 3 output to the MAC that also serves as the MODE3 device-mode strap input latched at power-up/reset.
40 DVDDH power_in +3.3/2.5/1.8V variable I/O digital power supply.
41 RXD2/MODE2 bidirectional Receive data bit 2 output to the MAC that also serves as the MODE2 device-mode strap input latched at power-up/reset.
42 DVDDL power_in +1.2V digital core power supply input.
43 RXD1/MODE1 bidirectional Receive data bit 1 output to the MAC that also serves as the MODE1 device-mode strap input latched at power-up/reset.
44 RXD0/MODE0 bidirectional Receive data bit 0 output to the MAC that also serves as the MODE0 device-mode strap input latched at power-up/reset.
45 RX_DV/CLK125_EN bidirectional Receive data valid output that also serves as the CLK125_EN strap input, where pulled-up enables and pulled-down disables the 125 MHz clock output.
46 DVDDH power_in +3.3/2.5/1.8V variable I/O digital power supply.
47 RX_ER output Receive error output asserted when an error is detected in the frame being transferred and also used to indicate Low Power Idle for EEE.
48 RX_CLK/PHYAD2 bidirectional Receive reference clock output that also serves as the PHY address bit 2 strap input latched at power-up/reset.
49 CRS output Carrier sense output indicating detection of carrier, used in half-duplex mode only.
50 MDC input Management clock input from the MAC (Schmitt-triggered, internal pull-up).
51 MDIO bidirectional Management data from/to the MAC, open-drain capable, requiring an external pull-up resistor of 1.0 kΩ to 4.7 kΩ to DVDDH.
52 COL output Collision detect output asserted on detection of a collision condition, used in half-duplex mode only.
53 INT_N/PME_N2/ALLPHYAD bidirectional Programmable interrupt output or PME_N2 wake-on-LAN event output (active low) that also serves as the ALLPHYAD strap input latched at power-up/reset.
54 DVDDL power_in +1.2V digital core power supply input.
55 CLK125_NDO/LED_MODE bidirectional 125 MHz clock output for use by the MAC that also serves as the LED_MODE strap input, where pulled-up selects Individual-LED mode and pulled-down selects Tri-color-LED mode.
56 RESET_N input Active-low chip reset whose rising edge latches the hardware strap configuration (Schmitt-triggered, internal pull-up).
57 TX_CLK output MII transmit reference clock output, not used in GMII mode.
58 LDO_O output On-chip 1.2V LDO controller output that drives the gate of a P-channel MOSFET to generate the core voltage, left unconnected if the system provides 1.2V.
59 AVDDL_PLL power_in +1.2V analog PLL power supply.
60 XO output Crystal output connected to one lead of the 25 MHz crystal and not connected when using an external oscillator.
61 XI input Crystal input connected to one lead of the 25 MHz crystal or driven by an external oscillator, with a tolerance of ±50ppm.
62 NC unconnected No connect; this pin is not bonded and can be connected to AVDDH power for footprint compatibility with older generation devices.
63 ISET passive PHY bias resistor pin to be connected to ground through a 6.04 kΩ 1% resistor.
64 AGNDH power_in Analog ground high.
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-64(8x8)
Category Logic ICs
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (DVDDL, AVDDL, AVDDL_PLL) VIN -0.5 1.8 V 116
Supply Voltage (AVDDH) VIN -0.5 5 V 116
Supply Voltage (DVDDH) VIN -0.5 5 V 116
Input Voltage (all inputs) -0.5 5 V 116
Output Voltage (all outputs) -0.5 5 V 116
Storage Temperature TS -55 150 °C 116
Lead Temperature (soldering) 260 °C soldering, 10s 116
HBM ESD Performance -5 5 kV 116
Supply Voltage (DVDDL, AVDDL, AVDDL_PLL) 1.14 1.32 V 116
Supply Voltage (AVDDH) 3.135 3.63 V @ 3.3V 116
Supply Voltage (AVDDH) 2.375 2.75 V @ 2.5V 116
Supply Voltage (DVDDH) 3.135 3.63 V @ 3.3V 116
Supply Voltage (DVDDH) 2.375 2.75 V @ 2.5V 116
Supply Voltage (DVDDH) 1.71 1.98 V @ 1.8V 116
Input voltage (all inputs) -0.3 3.63 V 116
Output voltage (all outputs) -0.3 3.63 V 116
Ambient Temperature (TA Industrial) TA -40 85 °C KSZ9131MNXI 116
Maximum Junction Temperature TJ 125 °C 116
ICLK High Input Level VIH 2 V 118
ICLK Low Input Level VIL 0.5 V 118
VI Low Input Level (DVDDH 3.3V) VIL 0.9 V DVDDH = 3.3V 119
VI High Input Level (DVDDH 3.3V) VIH 2.1 V DVDDH = 3.3V 119
VI Input Leakage IIH -10 10 µA VIN = VSS or DVDDH 119
VO8 Low Output Level VOL 0.4 V IOL = -8/-8/-6 mA 119
VO8 High Output Level VOH 2.4 V IOH = -8/-8/-6 mA 119
VO8 Output Tri-State Leakage IOZ -10 10 µA 119
VO24 Low Output Level VOL 0.4 V IOL = -24/-24/-14 mA 120
VO24 High Output Level VOH 2.4 V IOH = 24/-24/-14 mA 120
Peak Differential Output Voltage (1000BASE-T) VOP 670 820 mV IEEE 802.3 clause 40.6.1.2.1; Note 6-3 120
Signal Amplitude Symmetry (1000BASE-T) VSS 1 % IEEE 802.3 clause 40.6.1.2.1; Note 6-3 120
Signal Scaling (1000BASE-T) VSC 2 % IEEE 802.3 clause 40.6.1.2.1; Note 6-4 120
Peak Differential Output Voltage (100BASE-TX) VOUT 0.95 1.05 V ANSI X3.263 clause 9.1.2.2; Note 6-6 121
Signal Amplitude Symmetry (100BASE-TX) VSS 2 % ANSI X3.263 clause 9.1.4; Note 6-6 121
Signal Rise and Fall Time (100BASE-TX) TRF 3 5 ns ANSI X3.263 clause 9.1.6; Note 6-6 121
Duty Cycle Distortion (100BASE-TX) DCD -0.25 0.25 ns ANSI X3.263 clause 9.1.8; Note 6-7 121
Overshoot and Undershoot (100BASE-TX) VOS 5 % ANSI X3.263 clause 9.1.3 121
Transmitter Peak Differential Output Voltage 10BASE-T VOUT 2.2 2.5 2.8 V IEEE 802.3 clause 14.3.1.2.1; Note 6-9 121
Transmitter Peak Differential Output Voltage 10BASE-Te VOUT 1.54 1.96 V Note 6-9 121
Output Jitter (10BASE-T) 1.8 3.5 ns IEEE 802.3 clause 14.3.1.2.3; Note 6-10 121
Signal Rise and Fall Time (10BASE-T) TRF 25 ns 121
Receiver Differential Squelch Threshold VDS 300 400 mV IEEE 802.3 clause 14.3.1.3.2; Note 6-11 121
Output drive range for LDO_O to gate input of P-channel MOSFET VLDO_O 1.2 3.11 V AVDDH = 3.3V for MOSFET source voltage 122
Output drive range for LDO_O to gate input of P-channel MOSFET VLDO_O 1.2 2 V AVDDH = 2.5V for MOSFET source voltage 122
Output of P-channel MOSFET 1.23 1.25 1.32 V 122
POR rising threshold 1.2V Ethernet PHY Analog (AVDDL) 0.73 0.76 0.8 V AVDDH = 2.5V 122
POR falling threshold 1.2V Ethernet PHY Analog (AVDDL) 0.64 0.68 0.8 V AVDDH = 2.5V 122
POR falling threshold 1.2V Ethernet PHY Analog (AVDDL) 0.63 0.7 0.82 V AVDDH = 3.3V 122
POR rising threshold 2.5V/3.3V Ethernet PHY Analog (AVDDH) 1.9 2.1 2.2 V 122
POR falling threshold 2.5V/3.3V Ethernet PHY Analog (AVDDH) 1.9 2 2.1 V 122
POR hysteresis 2.5V/3.3V Ethernet PHY Analog (AVDDH) 65 110 145 mV 122
POR rising threshold 3.3V/2.5V/1.8V Variable I/O (DVDDH) 1.4 1.48 1.57 V 122
POR falling threshold 3.3V/2.5V/1.8V Variable I/O (DVDDH) 1.35 1.42 1.51 V 122
POR hysteresis 3.3V/2.5V/1.8V Variable I/O (DVDDH) 45 58 73 mV 122
MDC period tclkp 120 400 ns Note 6-16; Note 6-17 131
MDIO (read from PHY) output valid from rising edge of MDC tval 80 ns 131
MDIO (write to PHY) input setup time to rising edge of MDC tsu 8 ns 131
Junction-to-Ambient (0 m/s) JA 26 °C/W 0 Meters/second 117
Junction-to-Ambient (1 m/s) JA 22 °C/W 1 Meters/second 117
Junction-to-Ambient (2.5 m/s) JA 20 °C/W 2.5 Meters/second 117
Junction-to-Case JC 2.5 °C/W 117
Maximum Power Dissipation PMAX 756 mW 1000BASE-T Traffic, 3.3V I/O 117

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing abs slicer error for 1000BASE-T is +/-32. The largest instantaneous slicer error for 100BASE-TX is +/-64. A higher absolute 42

CAD (KiCad official)

  • Symbol: KSZ9131MNXI
  • Footprint: Package_DFN_QFN:QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm
  • 3D model: QFN-64(8x8) (KiCad packages3D, STEP)
  • 3D model files: ksz9131mnxi-etched.step / ksz9131mnxi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz9131mnxi.step / ksz9131mnxi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (143 pp, sha256 61a1f90c2c4d07f7, retrieved 2026-11-09, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF