main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ksz8864cnxca: symbol viewer · Ray
ksz8864cnxca-etched.glb Publish 0.1.0 · Ray
ksz8864cnxca-etched.step ksz8864cnxca: factory component page (tier=mfr) · Ray
ksz8864cnxca-hero.glb ksz8864cnxca: hero GLB from the etched model (keeps the MPN mark) · Ray
ksz8864cnxca-hero.overlay.json Publish 0.1.0 · Ray
ksz8864cnxca.glb Publish 0.1.0 · Ray
ksz8864cnxca.kicad_mod Publish 0.1.0 · Ray
ksz8864cnxca.kicad_sym ksz8864cnxca: symbol repaired (body fitted to the names) · Ray
ksz8864cnxca.lbr ksz8864cnxca: symbol repaired (body fitted to the names) · Ray
ksz8864cnxca.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 65 pins · Ray

KSZ8864CNXCA

Microchip Tech · Ethernet ICs · QFN-64(8x8)

KSZ8864CNXCA from Microchip Tech, in a QFN-64(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RXP1 input Port 1 physical receive signal + (differential).
2 RXM1 input Port 1 physical receive signal - (differential).
3 TXP1 output Port 1 physical transmit signal + (differential).
4 TXM1 output Port 1 physical transmit signal - (differential).
5 VDDA12 power_in 1.2V analog power supply.
6 GND power_in Ground, with all grounding of die bottom.
7 ISET passive Sets physical transmit output current; pull down with a 12.4 kΩ 1% resistor.
8 VDDAT power_in 3.3V analog VDD.
9 RXP2 input Port 2 physical receive signal + (differential).
10 RXM2 input Port 2 physical receive signal - (differential).
11 TXP2 output Port 2 physical transmit signal + (differential).
12 TXM2 output Port 2 physical transmit signal - (differential).
13 VDDAT power_in 3.3V analog VDD.
14 INTR_N output Interrupt, open-drain output pin.
15 VDDC power_in 1.2V digital core VDD.
16 SM3TXEN input MAC3 switch MII/RMII transmit enable (internal pull-down).
17 SM3TXD3 input MAC3 switch MII transmit bit 3 (internal pull-down).
18 SM3TXD2 input MAC3 switch MII transmit bit 2 (internal pull-down).
19 SM3TXD1 input MAC3 switch MII/RMII transmit bit 1 (internal pull-down).
20 SM3TXD0 input MAC3 switch MII/RMII transmit bit 0 (internal pull-down).
21 SM3TXC/SM3REFCLK bidirectional MAC3 MII transmit clock: input in SW3-MII MAC mode, output in PHY mode, input as SW3-RMII reference clock.
22 VDDIO power_in 3.3V, 2.5V, or 1.8V digital VDD for digital I/O circuitry.
23 SM3RXC bidirectional MAC3 MII receive clock: input in SW3-MII MAC mode, output in PHY mode, output as SW3-RMII reference clock; unused RMII clock can be pulled down or disabled by Register 87.
24 SM3RXDV/SM3CRSDV bidirectional SM3RXDV: MAC3 SW3-MII receive data valid; SM3CRSDV: SW3-RMII carrier sense/receive data valid.
25 SM3RXD3 bidirectional MAC3 MII receive bit 3; strap: PD (default) = enable flow control, PU = disable flow control.
26 SM3RXD2 bidirectional MAC3 MII receive bit 2; strap: PD (default) = disable back pressure, PU = enable back pressure.
27 SM3RXD1 bidirectional MAC3 MII/RMII receive bit 1; strap: PD (default) = drop excessive collision packets, PU = do not drop them.
28 SM3RXD0 bidirectional MAC3 MII/RMII receive bit 0; strap: PD (default) = disable aggressive back-off in half-duplex, PU = enable for performance enhancement.
29 SM3CRS bidirectional MAC3 switch MII carrier sense.
30 GND power_in Ground, with all grounding of die bottom.
31 SM3COL bidirectional MAC3 switch MII collision detect.
32 SM4TXEN input MAC4 switch MII/RMII transmit enable (internal pull-down).
33 SM4TXD3 input MAC4 switch MII transmit bit 3 (internal pull-down).
34 SM4TXD2 input MAC4 switch MII transmit bit 2 (internal pull-down).
35 SM4TXD1 input MAC4 switch MII/RMII transmit bit 1 (internal pull-down).
36 SM4TXD0 input MAC4 switch MII/RMII transmit bit 0 (internal pull-down).
37 SM4TXC/SM4REFCLK bidirectional MAC4 MII transmit clock: input in SW4-MII MAC mode, output in PHY mode, input as SW4-RMII reference clock (clock/normal mode set by strap P1LED1).
38 VDDIO power_in 3.3V, 2.5V, or 1.8V digital VDD for digital I/O circuitry.
39 SM4RXC bidirectional MAC4 MII receive clock: input in MAC mode, output in PHY mode, output as SW4-RMII 50 MHz reference clock (disable by Register 87 in normal mode).
40 SM4RXDV/SM4CRSDV bidirectional SM4RXDV: MAC4 SW4-MII receive data valid; SM4CRSDV: SW4-RMII carrier sense/receive data valid.
41 SM4RXD3 bidirectional MAC4 MII receive bit 3; strap: PD (default) = disable switch MII/RMII full-duplex flow control, PU = enable.
42 SM4RXD2 bidirectional MAC4 MII receive bit 2; strap: PD (default) = full-duplex, PU = half-duplex.
43 SM4RXD1 bidirectional MAC4 MII/RMII receive bit 1; strap: PD (default) = 100 Mbps mode, PU = 10 Mbps mode.
44 SM4RXD0 bidirectional MAC4 MII/RMII receive bit 0; strap LED mode: PD (default) = mode 0, PU = mode 1.
45 SM4COL bidirectional MAC4 MII collision detect: input in SW4-MII MAC mode, output in PHY mode.
46 SM4CRS bidirectional MAC4 MII carrier sense: input in SW4-MII MAC mode, output in PHY mode.
47 SCONF1 input With SCONF0 selects port 4 mode: 00 (default) SW4-MII PHY mode, 01 disable ports 3 and 4, 10 disable port 4 only, 11 MAC mode (internal pull-down).
48 SCONF0 input Strap pin configured together with SCONF1 (pin 47) for port 4 MII PHY/MAC mode selection (internal pull-down).
49 P2LED1 bidirectional Port 2 LED indicator; must be pulled down by a 1 kΩ resistor for this device.
50 P2LED0 bidirectional Port 2 LED indicator; strap for MAC3: PU (default) = MII, PD = RMII.
51 P1LED1 bidirectional Port 1 LED indicator; strap for RMII: PU (default) = clock mode from 25 MHz crystal, PD = normal mode with 50 MHz input on SM4TXC.
52 P1LED0 bidirectional Port 1 LED indicator; strap for MAC4: PU (default) = MII, PD = RMII.
53 MDC input MII management (SMI) interface clock (internal pull-up).
54 MDIO bidirectional MII management (SMI) data I/O; needs external pull-up when driven.
55 SPIQ bidirectional SPI serial data output in SPI slave mode; needs external pull-up when driven.
56 SPIC/SCL bidirectional Input clock up to 25 MHz in SPI slave mode; output clock at 61 kHz in I2C master mode; needs external pull-up when driven.
57 SPID/SDA bidirectional Serial data input in SPI slave mode; data input/output in I2C master mode; needs external pull-up when driven.
58 SPIS_N input Active-low SPI slave select/transfer start (high deselects and holds SPIQ high-impedance); not used in I2C master mode.
59 PS1 input Serial bus configuration with PS0: 00 I2C master for EEPROM, 01 SMI, 10 SPI slave, 11 factory test (BIST).
60 PS0 input Serial bus configuration pin, used with PS1 (internal pull-down).
61 RST_N input Active-low device reset (internal pull-up).
62 VDDC power_in 1.2V digital core VDD.
63 X1 input 25 MHz crystal connection or 3.3V oscillator input; tolerance ≤ ±50 ppm.
64 X2 output 25 MHz crystal clock connection.
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-64(8x8)
Category Communication Interface Chip/UART/485/232
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDDAR, VDDC -0.5 2.4 V VDDAR, VDDC 78
Supply Voltage VDDAT, VDDIO -0.5 4 V VDDAT, VDDIO 78
Input Voltage -0.5 4 V 78
Output Voltage -0.5 4 V 78
Lead Temperature 260 °C soldering, 10s 78
Storage Temperature TS -55 150 °C 78
HBM ESD Rating 5 kV Human body model, 1.5 kΩ in series with 100 pF 78
Operating Supply Voltage VDDAR, VDDC 1.14 1.26 V VDDAR, VDDC 78
Operating Supply Voltage VDDAT 3.135 3.465 V VDDAT 78
Operating Supply Voltage VDDIO @ 3.3V 3.135 3.465 V VDDIO @ 3.3V 78
Operating Supply Voltage VDDIO @ 2.5V 2.375 2.625 V VDDIO @ 2.5V 78
Operating Supply Voltage VDDIO @ 1.8V 1.71 1.89 V VDDIO @ 1.8V 78
Ambient Temperature Commercial TA 0 70 °C Commercial 78
Maximum Junction Temperature TJ max 125 °C 78
Thermal Resistance Junction to Ambient ΘJA 31.96 °C/W No heat spreader, air velocity 0 m/s 78
Thermal Resistance Junction to Case ΘJC 13.54 °C/W No heat spreader, air velocity 0 m/s 78
Input High Voltage VIH 2 V VDDIO = 3.3V (printed 2.0/1.8/1.3 for 3.3/2.5/1.8V) 79
Input Low Voltage VIL 0.8 V VDDIO = 3.3V (printed 0.8/0.7/0.5 for 3.3/2.5/1.8V) 79
Input Current (Excluding Pull-Up/Pull-Down) IIN -10 10 µA VIN = GND ~ VDDIO 79
Output High Voltage VOH 2.4 V IOH = -8 mA; VDDIO = 3.3V (printed 2.4/2.0/1.5 for 3.3/2.5/1.8V) 79
Output Low Voltage VOL 0.4 V IOL = 8 mA; VDDIO = 3.3V (printed 0.4/0.4/0.3 for 3.3/2.5/1.8V) 80
Output Tri-State Leakage IOZ 10 µA VIN = GND ~ VDDIO 80
100BASE-TX Peak Differential Output Voltage VO 0.95 1.05 V 100Ω termination on the differential output 80
100BASE-TX Output Voltage Imbalance VIMB 2 % 100Ω termination on the differential output 80
100BASE-TX Rise/Fall Time tr/tf 3 5 ns 80
100BASE-TX Rise/Fall Time Imbalance 0 0.5 ns 80
100BASE-TX Duty Cycle Distortion -0.5 0.5 ns 80
100BASE-TX Overshoot 5 % 80
100BASE-TX Output Jitters 0 0.75 1.4 ns Peak-to-Peak 80
10BASE-T Receive Squelch Threshold VSQ 300 400 585 mV 5 MHz square wave 80
10BASE-T Transmit Peak Differential Output Voltage VP 2.2 2.5 2.8 V 100Ω termination on the differential output 80
10BASE-T Transmit Output Jitters 1.4 3.5 ns Peak-to-Peak 80
10BASE-T Transmit Rise/Fall Times 28 30 ns 80
EEPROM Setup time tS1 20 ns 81
EEPROM Hold time tH1 20 ns 81
EEPROM Output valid tOV1 4096 4112 4128 ns 81
EEPROM Clock cycle tCYC1 16384 ns 81
100BASE-TX 3.3V Analog Current IDX 38 mA VDDAT; 100% utilization all ports 79
100BASE-TX 1.2V Analog Current IDda 13 mA VDDAR 79
100BASE-TX 1.2V Digital Current IDDc 41 mA VDDC 79
100BASE-TX Digital IO 3.3V Current IDDIO 27 mA VDDIO (SW3/4-MII/RMII) 79
10BASE-T 3.3V Analog Current IDX 48 mA VDDAT; 100% utilization all ports 79
10BASE-T 1.2V Analog Current IDda 8 mA VDDAR 79
10BASE-T 1.2V Digital Current IDDc 41 mA VDDC 79
10BASE-T Digital IO 3.3V Current IDDIO 28 mA VDDIO (SW3/4-MII/RMII) 79
Auto-Negotiation 3.3V Analog Current IDX 25 mA VDDAT 79
Auto-Negotiation 1.2V Analog Current IDda 13 mA VDDAR 79
Auto-Negotiation 1.2V Digital Current IEDM 42 mA VDDC 79
Auto-Negotiation Digital IO 3.3V Current IDDIO 28 mA VDDIO (SW3/4-MII/RMII) 79
Power-Saving mode 3.3V Current IPSM1 45 mA VDDAT + VDDIO 79
Power-Saving mode 1.2V Current IPSM2 49 mA VDDAR + VDDC 79
Soft Power-Down mode 3.3V Current ISPDM1 15 mA VDDAT + VDDIO 79
Soft Power-Down mode 1.2V Current ISPDM2 1 mA VDDAR + VDDC 79
Energy-Detect mode + PLL Off 3.3V Current IEDM1 35 mA VDDAT + VDDIO 79
Energy-Detect mode + PLL Off 1.2V Current IEDM2 44 mA VDDAR + VDDC 79
Crystal Frequency 25 MHz Reference crystal, tolerance ≤ ±50 ppm 90

CAD (KiCad official)

  • Symbol: KSZ8864CNXCA
  • Footprint: Package_DFN_QFN:QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm
  • 3D model: QFN-64(8x8) (KiCad packages3D, STEP)
  • 3D model files: ksz8864cnxca-etched.step / ksz8864cnxca-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz8864cnxca.step / ksz8864cnxca.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (98 pp, sha256 00c8886e1e293e06, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF