main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ksz8863fll: symbol repaired (body fitted to the names) · Ray
ksz8863fll-etched.glb Publish 0.1.0 · Ray
ksz8863fll-etched.step ksz8863fll: factory component page (tier=mfr) · Ray
ksz8863fll-hero.glb ksz8863fll: hero GLB from the etched model (keeps the MPN mark) · Ray
ksz8863fll-hero.overlay.json Publish 0.1.0 · Ray
ksz8863fll.glb Publish 0.1.0 · Ray
ksz8863fll.kicad_mod Publish 0.1.0 · Ray
ksz8863fll.kicad_sym ksz8863fll: symbol repaired (body fitted to the names) · Ray
ksz8863fll.lbr ksz8863fll: symbol repaired (body fitted to the names) · Ray
ksz8863fll.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

KSZ8863FLL

Microchip Tech · Ethernet ICs · LQFP-48(7x7)

KSZ8863FLL from Microchip Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RXM1 bidirectional Port 1 physical receive or transmit signal (- differential).
2 RXP1 bidirectional Port 1 physical receive or transmit signal (+ differential).
3 TXM1 bidirectional Port 1 physical transmit or receive signal (- differential).
4 TXP1 bidirectional Port 1 physical transmit or receive signal (+ differential).
5 VDDA_3.3 power_in 3.3V analog VDD supply.
6 ISET output Sets physical transmit output current; pull down with an 11.8 kΩ 1% resistor to ground.
7 VDDA_1.8 power_in 1.8V analog core power input, fed from VDDCO (pin 42).
8 RXM2 bidirectional Port 2 physical receive or transmit signal (- differential).
9 RXP2 bidirectional Port 2 physical receive or transmit signal (+ differential).
10 AGND power_in Analog ground.
11 TXM2 bidirectional Port 2 physical transmit or receive signal (- differential).
12 TXP2 bidirectional Port 2 physical transmit or receive signal (+ differential).
13 NC unconnected No connection.
14 X1 input 25 MHz or 50 MHz crystal or oscillator clock input (±50 ppm); with an oscillator, X1 connects to a 3.3V tolerant oscillator and the clock must be applied before reset goes high.
15 X2 output Crystal connection for the 25 MHz or 50 MHz clock; NC when an oscillator drives X1.
16 SMTXEN3 input Switch MII transmit enable, with internal pull-up.
17 SMTXD33/EN_REFCLKO_3 input Switch MII transmit data bit 3 on MLL/FLL (internal pull-up); the RLL strap function does not apply to the FLL.
18 SMTXD32 input Switch MII transmit data bit 2, with internal pull-up.
19 SMTXD31 input Switch MII/RMII transmit data bit 1, with internal pull-up.
20 SMTXD30 input Switch MII/RMII transmit data bit 0, with internal pull-up.
21 GND power_in Digital ground.
22 VDDIO power_in 3.3V, 2.5V, or 1.8V digital IO supply input with good decoupling capacitors.
23 SMTXC3/REFCLKI_3 bidirectional On MLL/FLL, switch MII transmit clock: output in PHY MII and SNI modes, input in MAC MII mode.
24 SMTXER3/MII_LINK_3 input Switch port 3 MII transmit error; in MII PHY mode 0 = MII link from host, 1 = no link and enables bypass mode (internal pull-down).
25 SMRXDV3 bidirectional Switch MII/RMII receive data valid; strap option for port 1 force duplex (P1DPX), PU = full-duplex, PD = half-duplex.
26 SMRXD33/REFCLKO_3 bidirectional On MLL/FLL, switch MII receive data bit 3; strap option to enable port 2 auto-negotiation (P2ANEN), PU = enable, PD = disable.
27 SMRXD32 bidirectional Switch MII receive data bit 2; strap option for port 2 forced speed (P2SPD), PU = 100BT, PD = 10BT if P2ANEN = 0.
28 SMRXD31 bidirectional Switch MII/RMII receive data bit 1; strap option for port 2 force duplex (P2DPX), PU = full-duplex, PD = half-duplex.
29 SMRXD30 bidirectional Switch MII/RMII receive data bit 0; strap option for port 2 forced flow control (P2FFC), PU = always enabled, PD = per auto-negotiation.
30 SMRXC3 bidirectional Switch MII receive clock: output in PHY MII mode, input in MAC MII mode.
31 GND power_in Digital ground.
32 VDDC power_in 1.8V digital core power input, fed from VDDCO (pin 42).
33 SCOL3 bidirectional Switch MII collision detect (input with internal pull-up during reset, output otherwise).
34 SCRS3 bidirectional Switch MII carrier sense (input with internal pull-up during reset, output otherwise).
35 INTRN output Active-low interrupt to host CPU, indicating an interrupt status bit is set on lost link (registers 187 and 188); internal pull-up.
36 SCL_MDC bidirectional Clock input for SPI Client, I2C Client and MIIM modes; clock output in I2C Host mode.
37 SDA_MDIO bidirectional SPI serial data input, I2C serial data I/O, or MIIM data I/O; needs an external pull-up when in use.
38 SPIQ bidirectional SPI Client serial data output (external pull-up needed when in use); strap option for port 1 forced flow control (P1FFC), PU = always enabled, PD = per auto-negotiation.
39 SPISN input SPI Client chip select, active-low; when high the device is deselected and SPIQ is high-impedance; external pull-up needed when using SPI or MDC/MDIO-MIIM/SMI mode.
40 VDDIO power_in 3.3V, 2.5V, or 1.8V digital IO supply input with good decoupling capacitors.
41 GND power_in Digital ground.
42 VDDCO power_out 1.8V core power output from the internal LDO, powering VDDA_1.8 and VDDC; do not connect an external supply, and use a ferrite bead between analog and digital 1.8V.
43 P1LED1 bidirectional Port 1 LED indicator, default speed (register 195 bit [5:4]); strap option for port 1 forced speed (P1SPD), PU = 100BT, PD = 10BT if P1ANEN = 0.
44 P1LED0 bidirectional Port 1 LED indicator, default Link/Act. (register 195 bit [5:4]); strap option to enable port 1 auto-negotiation (P1ANEN), PU = enable, PD = disable (default).
45 P2LED1 bidirectional Port 2 LED indicator, default speed; with P2LED0 straps the serial bus mode: [0,0] I2C Host (EEPROM), [0,1] I2C Client, [1,0] SPI Client, [1,1] SMI/MIIM.
46 P2LED0 bidirectional Port 2 LED indicator, default Link/Act.; with P2LED1 straps the serial bus configuration mode (I2C Host, I2C Client, SPI Client, or SMI/MIIM).
47 RSTN input Hardware reset, active-low, with internal pull-up.
48 FXSD1 input FLL: fiber signal detect input for port 1 (threshold 1.2V or 2.0V selected by register 192 bit 6); tie high to force 100BASE-FX mode without FEF.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package LQFP-48(7x7)
Category Communication Interface Chip/UART/485/232
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDDA_1.8, VDDC (abs max) VIN -0.5 2.4 V VDDA_1.8, VDDC 72
Supply Voltage VDDA_3.3, VDDIO (abs max) VIN -0.5 4 V VDDA_3.3, VDDIO 72
Input Voltage -0.5 4 V 72
Output Voltage -0.5 4 V 72
Lead Temperature 260 °C soldering, 10s 72
Storage Temperature TS -55 150 °C 72
HBM ESD Rating 4 kV 72
Supply Voltage VDDA_1.8, VDDC 1.67 1.94 V VDDA_1.8, VDDC 72
Supply Voltage VDDA_3.3 3.135 3.465 V VDDA_3.3 72
Supply Voltage VDDIO 1.71 3.465 V VDDIO 72
Ambient Temperature (Commercial) TA 0 70 °C Commercial 72
Ambient Temperature (Industrial) TA -40 85 °C Industrial 72
Junction Temperature TJ 125 °C 72
Input High Voltage VIH 2 V VDDIO = 3.3V (2.0/1.8/1.3 for 3.3V/2.5V/1.8V) 73
Input Low Voltage VIL 0.8 V VDDIO = 3.3V (0.8/0.7/0.5 for 3.3V/2.5V/1.8V) 73
Input Current IIN -10 10 µA VIN = GND ~ VDDIO 73
Output High Voltage VOH 2.4 V IOH = 8 mA; VDDIO = 3.3V (2.4/2.0/1.5 for 3.3V/2.5V/1.8V) 73
Output Low Voltage VOL 0.4 V IOL = 8 mA; VDDIO = 3.3V (0.4/0.4/0.3 for 3.3V/2.5V/1.8V) 73
Output Tri-State Leakage /IOZ/ 10 µA 73
Peak Differential Output Voltage (100BASE-TX) VO 0.95 1.05 V 100Ω termination across differential output 73
Output Voltage Imbalance VIMB 2 % 100Ω termination across differential output 73
Rise/Fall Time tr/tf 3 5 ns 73
Rise/Fall Time Imbalance 0 0.5 ns 73
Duty Cycle Distortion -0.5 0.5 ns 73
Overshoot 5 % 73
Output Jitter (100BASE-TX) 0.7 1.4 ns Peak-to-peak 73
Output Jitter (10BASE-T) 1.4 11 ns Peak-to-peak 74
EEPROM Setup time ts1 20 ns 75
EEPROM Hold time th1 20 ns 75
EEPROM Output valid tov1 4096 4112 4128 ns 75
Thermal Resistance LQFP ΘJA 52.83 °C/W No heat spreader 72
Thermal Resistance LQFP ΘJC 19.12 °C/W No heat spreader 72
100BASE-TX supply current IDDXIO 114 mA VDDA_3.3, VDDIO = 3.3V; all ports 100% utilization 73
10BASE-T supply current IDDXIO 85 mA VDDA_3.3, VDDIO = 3.3V; all ports 100% utilization 73
Power Saving Mode current IDD3 96 mA VDDA_3.3, VDDIO = 3.3V; Unplug Port 1 and Port 2; Set Register 195 bit[1,0] = [1,1] 73
Soft Power Down Mode current IDD4 8 mA VDDA_3.3, VDDIO = 3.3V; Set Register 195 bit[1,0] = [1,0] 73
Energy Detect Mode current IDD5 16 mA VDDA_3.3, VDDIO = 3.3V; Unplug Port 1 and Port 2 73
Squelch Threshold VSQ 400 mV 5 MHz square wave 74
Peak Differential Output Voltage (10BASE-T) VP 2.4 V 100Ω termination across differential output 74
EEPROM Clock cycle tcyc1 16384 ns 75

CAD (KiCad official)

  • Symbol: KSZ8863FLL
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: ksz8863fll-etched.step / ksz8863fll-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz8863fll.step / ksz8863fll.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (92 pp, sha256 285f1f868d3f2637, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF