main
Ray ksz8851snli-tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 278dab7
{
  "slug": "ksz8851snli-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Ethernet Controllers, QFN-32(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "ksz8851snli-tr"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ksz8851snli-tr.kicad_sym",
    "ksz8851snli-tr.kicad_mod",
    "ksz8851snli-tr.glb",
    "ksz8851snli-tr.step",
    "ksz8851snli-tr.lbr",
    "docs/hero.png",
    "docs/ksz8851snli-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ksz8851snli-tr-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "KSZ8851SNLI-TR",
    "manufacturer": "Microchip",
    "package": "QFN-32(5x5)",
    "pin_count": 33,
    "category": "Ethernet Controllers",
    "parts": {
      "symbol": "ksz8851snli-tr.kicad_sym",
      "footprint": "ksz8851snli-tr.kicad_mod",
      "model_3d": "ksz8851snli-tr-etched.glb",
      "model_3d_plain": "ksz8851snli-tr.glb",
      "model_3d_step": "ksz8851snli-tr-etched.step",
      "model_3d_step_plain": "ksz8851snli-tr.step",
      "lbr": "ksz8851snli-tr.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "LED0",
        "type": "output",
        "description": "Programmable LED0 output (open-drain-style, active LOW = LED on). Default indicates Link/Activity per CGCR[9]."
      },
      {
        "number": "2",
        "name": "PME",
        "type": "output",
        "description": "Power Management Event output (default active low, polarity set in PMECR). Asserted when a Wake-on-LAN event is detected, requesting host wake from low-power mode."
      },
      {
        "number": "3",
        "name": "INTRN",
        "type": "output",
        "description": "Interrupt Not - active-low interrupt output to host CPU when any enabled interrupt status bit is set. Requires an external 4.7 kΩ pull-up resistor."
      },
      {
        "number": "4",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital IO ground."
      },
      {
        "number": "5",
        "name": "VDD_CO1.8",
        "type": "power_out",
        "description": "1.8V on-chip LDO regulator output. Feeds VDD_A1.8 (pin 9) and VDD_D1.8 (pin 23) for core supply. Leave floating if VDD_IO = 1.8V (core is then sourced from the external 1.8V rail)."
      },
      {
        "number": "6",
        "name": "EED_IO",
        "type": "bidirectional",
        "description": "EEPROM serial data (in/out) to external configuration EEPROM. Also a strap-in at reset: pull-up = EEPROM present, floating/pull-down = no EEPROM (default). Latched into CCR bit 9."
      },
      {
        "number": "7",
        "name": "EESK",
        "type": "output",
        "description": "EEPROM serial clock output to external EEPROM. Period is 4 µs (OBCR[1:0]=11 @25MHz) or 800 ns (OBCR[1:0]=00 @125MHz)."
      },
      {
        "number": "8",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "9",
        "name": "VDD_A1.8",
        "type": "power_in",
        "description": "1.8V analog supply. Normally tied to VDD_CO1.8 (pin 5) through appropriate filtering; if VDD_IO=1.8V, source from the same external 1.8V rail as VDD_IO."
      },
      {
        "number": "10",
        "name": "EECS",
        "type": "output",
        "description": "EEPROM chip-select output to external EEPROM."
      },
      {
        "number": "11",
        "name": "RXP",
        "type": "bidirectional",
        "description": "10/100 Ethernet media-dependent interface, positive side. Physical receive (MDI) or transmit (MDIX) - polarity assigned by Auto MDI-X."
      },
      {
        "number": "12",
        "name": "RXM",
        "type": "bidirectional",
        "description": "10/100 Ethernet media-dependent interface, negative side. Physical receive (MDI) or transmit (MDIX) - polarity assigned by Auto MDI-X."
      },
      {
        "number": "13",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "14",
        "name": "TXP",
        "type": "bidirectional",
        "description": "10/100 Ethernet media-dependent interface, positive side. Physical transmit (MDI) or receive (MDIX) - polarity assigned by Auto MDI-X."
      },
      {
        "number": "15",
        "name": "TXM",
        "type": "bidirectional",
        "description": "10/100 Ethernet media-dependent interface, negative side. Physical transmit (MDI) or receive (MDIX) - polarity assigned by Auto MDI-X."
      },
      {
        "number": "16",
        "name": "VDD_A3.3",
        "type": "power_in",
        "description": "3.3V analog VDD input supply for the PHY. Requires decoupling capacitors."
      },
      {
        "number": "17",
        "name": "ISET",
        "type": "passive",
        "description": "PHY transmit bias current set. Connect a 3.01 kΩ 1% resistor from this pin to ground."
      },
      {
        "number": "18",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "19",
        "name": "RSTN",
        "type": "input",
        "description": "Hardware reset, active-low. Must be held low for a minimum of 10 ms after the 3.3V supply is stable."
      },
      {
        "number": "20",
        "name": "X1",
        "type": "input",
        "description": "25 MHz crystal / oscillator input. Connect a 25 MHz crystal between X1 and X2, or drive X1 from a 3.3V-tolerant oscillator (leave X2 unconnected in that case). Clock accuracy ±50 ppm."
      },
      {
        "number": "21",
        "name": "X2",
        "type": "output",
        "description": "25 MHz crystal feedback output. Connects to the other terminal of the 25 MHz crystal at X1; leave NC when using an external oscillator on X1."
      },
      {
        "number": "22",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital IO ground."
      },
      {
        "number": "23",
        "name": "VDD_D1.8",
        "type": "power_in",
        "description": "1.8V digital core supply. Normally tied to VDD_CO1.8 (pin 5) through appropriate filtering; if VDD_IO=1.8V, source from the same external 1.8V rail as VDD_IO."
      },
      {
        "number": "24",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital IO ground."
      },
      {
        "number": "25",
        "name": "VDD_IO",
        "type": "power_in",
        "description": "Digital IO supply - accepts 3.3V, 2.5V, or 1.8V. Requires decoupling capacitors."
      },
      {
        "number": "26",
        "name": "CSN",
        "type": "input",
        "description": "SPI slave chip-select input, active low."
      },
      {
        "number": "27",
        "name": "SO",
        "type": "tri_state",
        "description": "SPI slave serial data out (MISO). Tri-stated when CSN is negated - requires an external 4.7 kΩ pull-up to keep the line high while the driver is tri-stated."
      },
      {
        "number": "28",
        "name": "SCLK",
        "type": "input",
        "description": "SPI slave serial clock input. Supports clock speeds up to 40 MHz."
      },
      {
        "number": "29",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital IO ground."
      },
      {
        "number": "30",
        "name": "VDD_IO",
        "type": "power_in",
        "description": "Digital IO supply - accepts 3.3V, 2.5V, or 1.8V. Requires decoupling capacitors."
      },
      {
        "number": "31",
        "name": "SI",
        "type": "input",
        "description": "SPI slave serial data in (MOSI)."
      },
      {
        "number": "32",
        "name": "LED1",
        "type": "output",
        "description": "Programmable LED1 output (active LOW = LED on). Default indicates 100BASE-T activity per CGCR[9]; see LED0 (pin 1)."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed thermal pad on bottom of QFN. Datasheet labels it 'Paddle Ground on Bottom of Chip' - connect to ground plane for electrical/thermal grounding."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": "576-3506-2-ND",
      "mouser": "998-KSZ8851SNLITR"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:02:19Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "576-3506-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "998-KSZ8851SNLITR",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "ksz8851snli-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ksz8851snli-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "863c8a0b035533ba87563750b1a200278128e579a859058fc7cb8ca199f5f818",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}