main
Ray ksz8081rnaia-tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 0684c67
{
  "slug": "ksz8081rnaia-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Ethernet Controllers, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "ksz8081rnaia-tr"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ksz8081rnaia-tr.kicad_sym",
    "ksz8081rnaia-tr.kicad_mod",
    "ksz8081rnaia-tr.glb",
    "ksz8081rnaia-tr.step",
    "ksz8081rnaia-tr.lbr",
    "docs/hero.png",
    "docs/ksz8081rnaia-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ksz8081rnaia-tr-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "KSZ8081RNAIA-TR",
    "manufacturer": "Microchip",
    "package": "QFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Ethernet Controllers",
    "parts": {
      "symbol": "ksz8081rnaia-tr.kicad_sym",
      "footprint": "ksz8081rnaia-tr.kicad_mod",
      "model_3d": "ksz8081rnaia-tr-etched.glb",
      "model_3d_plain": "ksz8081rnaia-tr.glb",
      "model_3d_step": "ksz8081rnaia-tr-etched.step",
      "model_3d_step_plain": "ksz8081rnaia-tr.step",
      "lbr": "ksz8081rnaia-tr.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD_1.2",
        "type": "power_in",
        "description": "1.2 V core supply rail (sourced from the on-chip regulator). Decouple with 2.2 µF and 0.1 µF capacitors to ground."
      },
      {
        "number": "2",
        "name": "VDDA_3.3",
        "type": "power_in",
        "description": "3.3 V analog supply rail for the PHY analog front-end."
      },
      {
        "number": "3",
        "name": "RXM",
        "type": "bidirectional",
        "description": "Physical receive/transmit signal, negative differential line of the RX/TX pair to the magnetics (Auto MDI/MDI-X swaps RX/TX function)."
      },
      {
        "number": "4",
        "name": "RXP",
        "type": "bidirectional",
        "description": "Physical receive/transmit signal, positive differential line of the RX/TX pair to the magnetics (Auto MDI/MDI-X swaps RX/TX function)."
      },
      {
        "number": "5",
        "name": "TXM",
        "type": "bidirectional",
        "description": "Physical transmit/receive signal, negative differential line of the TX/RX pair to the magnetics (Auto MDI/MDI-X swaps TX/RX function)."
      },
      {
        "number": "6",
        "name": "TXP",
        "type": "bidirectional",
        "description": "Physical transmit/receive signal, positive differential line of the TX/RX pair to the magnetics (Auto MDI/MDI-X swaps TX/RX function)."
      },
      {
        "number": "7",
        "name": "XO",
        "type": "output",
        "description": "Crystal feedback output for the 25 MHz crystal reference. Leave as a no-connect when an external oscillator or clock source is used on XI."
      },
      {
        "number": "8",
        "name": "XI",
        "type": "input",
        "description": "Reference clock input. In RMII 25 MHz mode accepts a 25 MHz ±50 ppm crystal, oscillator, or external clock. In RMII 50 MHz mode accepts a 50 MHz ±50 ppm oscillator/external clock. RNA power-up default is 25 MHz crystal on this pin."
      },
      {
        "number": "9",
        "name": "REXT",
        "type": "passive",
        "description": "Sets PHY transmit output current bias. Connect an external 6.49 kΩ 1% resistor from this pin to ground."
      },
      {
        "number": "10",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "MII management interface data I/O. Open-drain with a weak internal pull-up; requires an external 1.0 kΩ pull-up resistor to VDDIO."
      },
      {
        "number": "11",
        "name": "MDC",
        "type": "input",
        "description": "MII management interface clock input, synchronous with MDIO data. Has an internal pull-up."
      },
      {
        "number": "12",
        "name": "RXD1",
        "type": "output",
        "description": "RMII receive data bit 1 output to the MAC. Synchronous with the 50 MHz RMII reference clock; two bits per clock while CRS_DV is asserted. Internally pulled down during power-up/reset (strap-in), output otherwise."
      },
      {
        "number": "13",
        "name": "RXD0",
        "type": "output",
        "description": "RMII receive data bit 0 output to the MAC. Synchronous with the 50 MHz RMII reference clock; two bits per clock while CRS_DV is asserted. Internally pulled up during power-up/reset (strap-in), output otherwise."
      },
      {
        "number": "14",
        "name": "VDDIO",
        "type": "power_in",
        "description": "Digital I/O supply rail. Selectable 3.3 V, 2.5 V, or 1.8 V to match the MAC logic level."
      },
      {
        "number": "15",
        "name": "CRS_DV/PHYAD[1:0]",
        "type": "bidirectional",
        "description": "RMII Carrier Sense / Receive Data Valid output during normal operation. Latched at de-assertion of RST# as PHYAD[1:0]: pull-up → PHY address 0x03, pull-down (default) → PHY address 0x00. PHYAD[4:2] are fixed to 000."
      },
      {
        "number": "16",
        "name": "REF_CLK",
        "type": "bidirectional",
        "description": "RMII 25 MHz mode: outputs the 50 MHz RMII reference clock to the MAC. RMII 50 MHz mode: no-connect (clock comes in on XI instead). RNA power-up default is 25 MHz mode (this pin drives 50 MHz out)."
      },
      {
        "number": "17",
        "name": "RXER",
        "type": "bidirectional",
        "description": "RMII receive-error output to the MAC. Must latch a pull-down value at the de-assertion of reset for normal operation; add an external pull-down if the MAC drives this line high at reset (or configure Register 16h Bit [15])."
      },
      {
        "number": "18",
        "name": "INTRP",
        "type": "output",
        "description": "Programmable interrupt output to the MAC/host. Open-drain with a weak internal pull-up; requires an external 1.0 kΩ pull-up resistor to VDDIO."
      },
      {
        "number": "19",
        "name": "TXEN",
        "type": "input",
        "description": "RMII transmit-enable input from the MAC. Asserted by the MAC while TXD[1:0] carry valid data (two bits per 50 MHz RMII reference clock period)."
      },
      {
        "number": "20",
        "name": "TXD0",
        "type": "input",
        "description": "RMII transmit data bit 0 input from the MAC. Sampled on the 50 MHz RMII reference clock while TXEN is asserted."
      },
      {
        "number": "21",
        "name": "TXD1",
        "type": "bidirectional",
        "description": "RMII transmit data bit 1 input from the MAC during normal operation. In NAND Tree mode this pin is used as the NAND Tree output for parametric fault-detection testing."
      },
      {
        "number": "22",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return."
      },
      {
        "number": "23",
        "name": "LED0/ANEN_SPEED",
        "type": "bidirectional",
        "description": "Programmable LED0 output during normal operation (modes selected via Register 1Fh bits [5:4]). Latched at reset de-assertion as ANEN_SPEED strap: pull-up (default) enables auto-negotiation and selects 100 Mbps; pull-down disables auto-negotiation and selects 10 Mbps. Values load into Register 0h bits [12]/[13] and Register 4h."
      },
      {
        "number": "24",
        "name": "RST#",
        "type": "input",
        "description": "Active-low chip reset input. Internal pull-up; drive low to reset the device."
      },
      {
        "number": "25",
        "name": "PAD",
        "type": "power_in",
        "description": "Exposed thermal paddle on the bottom of the QFN. Must be soldered to the board ground plane."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C145623",
      "digikey": "576-4174-2-ND",
      "mouser": "998-KSZ8081RNAIATR"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:02:17Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "576-4174-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "998-KSZ8081RNAIATR",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "ksz8081rnaia-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ksz8081rnaia-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "05baa67997a14e33df8ab737397d5fd9d174b6d42bec51f7963247a28de05c1d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}