KP523208ALGA

{
  "slug": "kp523208alga",
  "version": "0.1.0",
  "type": "component",
  "description": "Kiwi Instruments DC-DC Converters, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "kp523208alga",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "kp523208alga.kicad_sym",
    "kp523208alga.kicad_mod",
    "kp523208alga.glb",
    "kp523208alga.step",
    "kp523208alga.lbr",
    "docs/hero.png",
    "docs/kp523208alga-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "kp523208alga-hero.glb",
    "kp523208alga-hero.overlay.json",
    "kp523208alga-etched.glb"
  ],
  "component": {
    "mpn": "KP523208ALGA",
    "manufacturer": "Kiwi Instruments",
    "package": "TSOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590269354349789184",
    "parts": {
      "symbol": "kp523208alga.kicad_sym",
      "footprint": "kp523208alga.kicad_mod",
      "model_3d": "kp523208alga-hero.glb",
      "model_3d_plain": "kp523208alga-etched.glb",
      "model_3d_step": "kp523208alga-etched.step",
      "model_3d_step_plain": "kp523208alga.step",
      "lbr": "kp523208alga.lbr"
    },
    "distributor_links": {
      "lcsc": "C5124015"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T18:14:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Power and signal ground for the converter; the datasheet gives no voltage limit for this pin."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "power_out",
        "description": "Switching node that must be connected to the output inductor with a short, wide trace; the SW pin voltage limits are DC -0.1 V to 17 V and transient (<10 ns) -3 V to 19 V under recommended conditions."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin with a 4.5 V to 17 V recommended range; place a 100 nF ceramic decoupling capacitor as close as possible to the VIN and GND pins."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin that receives the resistor-divided output voltage to set and regulate VOUT, with a reference of 0.768 V and a recommended EN/FB range of -0.1 V to 5.5 V."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable control pin that is pulled high or left floating to enable operation; when tied to VIN a series pull-up of at least 100 kΩ is required, and it can also set the VIN UVLO thresholds."
      },
      {
        "number": "6",
        "name": "BST",
        "type": "power_out",
        "description": "Charge-pump voltage that drives the high-side MOSFET; connect a 100 nF ceramic capacitor between BST and SW, with a recommended BST range of -0.1 V to 22.5 V and BST-SW of -0.1 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout comes from the single pin table in Section 6 (page 2), which covers both the KP523201A (PFM) ; The datasheet is in Chinese; the pin descriptions are translated into English engineering sentences "
        ],
        "pages_sent": 23,
        "cost_usd": 0.1118,
        "at": "2026-10-18T18:12:00"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590269354349789184",
        "pages": 23,
        "sha256": "b57657f3132eae29",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "kp523208alga.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "kp523208alga-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "49c6cc9a0f8fccab36372c85e56e6afa3c8a73a489c2168074354045b86af9cb",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}