KP522201ALGA

{
  "slug": "kp522201alga",
  "version": "0.1.0",
  "type": "component",
  "description": "Kiwi Instruments DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "kp522201alga",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "kp522201alga.kicad_sym",
    "kp522201alga.kicad_mod",
    "kp522201alga.glb",
    "kp522201alga.step",
    "kp522201alga.lbr",
    "docs/hero.png",
    "docs/kp522201alga-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "kp522201alga-hero.glb",
    "kp522201alga-hero.overlay.json",
    "kp522201alga-etched.glb"
  ],
  "component": {
    "mpn": "KP522201ALGA",
    "manufacturer": "Kiwi Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589839041005842432",
    "parts": {
      "symbol": "kp522201alga.kicad_sym",
      "footprint": "kp522201alga.kicad_mod",
      "model_3d": "kp522201alga-hero.glb",
      "model_3d_plain": "kp522201alga-etched.glb",
      "model_3d_step": "kp522201alga-etched.step",
      "model_3d_step_plain": "kp522201alga.step",
      "lbr": "kp522201alga.lbr"
    },
    "distributor_links": {
      "lcsc": "C5124009"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T09:18:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "error"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Power and signal ground for the converter."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "power_out",
        "description": "Switching node connected to the output inductor through a short, wide trace; recommended DC range is -0.1 V to 17 V (transient below 10 ns: -3 V to 19 V)."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin, operating range 4.5 V to 17 V; place a 100 nF ceramic decoupling capacitor as close as possible to the VIN and GND pins."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin receiving the resistor-divided output voltage for output setting and control, with reference voltage 0.768 V; recommended range -0.1 V to 5.5 V."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable control pin: pull high or leave floating to enable the chip; when tied to VIN, a series pull-up resistor of at least 100 kΩ is required, and it can also set the VIN UVLO threshold; recommended range -0.1 V to 5.5 V."
      },
      {
        "number": "6",
        "name": "BST",
        "type": "power_out",
        "description": "Charge-pump supply for the high-side MOSFET gate driver; connect a 100 nF ceramic capacitor between BST and SW, with BOOT-SW recommended at no more than 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin table is taken from the SOT23-6 pin definition (section 6, Table 6.1) and applies to both orderi; Datasheet lists pins as type P (power) for SW and BST; mapped here to KiCad power_out because they a; Datasheet pin description text is in Chinese and was translated; the recommended voltage ranges quot"
        ],
        "pages_sent": 23,
        "cost_usd": 0.1095,
        "at": "2026-10-19T09:16:49"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589839041005842432",
        "pages": 23,
        "sha256": "543b1f35d8a048ce",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "kp522201alga.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "kp522201alga-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8c5093c65972507263064a01f526f15ca9be82ca83a187b002ce71917d9400e0",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}