main
Ray
Publish 0.1.0
01886d2
KP106SPA
Kiwi Instruments · LED Drivers · SOP-8
KP106SPA from Kiwi Instruments, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | input | Constant-current loop compensation pin; a 1-4.7uF ceramic capacitor to the chip reference ground is recommended, with COMP clamped between 0.7 V and 3 V. |
| 2 | GND | power_in | Chip reference ground. |
| 3 | VDD | power_in | Chip supply pin with normal operating voltage 10 to 13 V, undervoltage lockout at 7 to 9 V, and VDD DC supply rating of 14 V. |
| 4 | FB | input | Inductor current demagnetization detection and output overvoltage protection pin, with OVP threshold of 1.9 to 2.1 V. |
| 5 | CS | input | Current sense input pin with 300 ns leading-edge blanking time and peak current reference of 1.4 to 1.6 V. |
| 6 | GATE | output | Drive output for the high-voltage MOSFET, with GATE voltage rated -0.3 to 14 V. |
| 7 | NC | unconnected | Non-functional pin that is left floating in the application. |
| 8 | HV | power_in | Input for the internal high-voltage start-up and supply circuit, with HV voltage rated -0.3 to 600 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Kiwi Instruments |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| HV 电压 | -0.3 | 600 | V | 3 | |||
| VDD 直流供电电压 | 14 | V | 3 | ||||
| VDD 直流箝位电流 | 10 | mA | 3 | ||||
| CS, FB, COMP 电压 | -0.3 | 7 | V | 3 | |||
| GATE 电压 | -0.3 | 14 | V | 3 | |||
| 芯片工作结温 | 150 | °C | 3 | ||||
| 储藏温度 | -65 | 150 | °C | 3 | |||
| ESD 能力 (人体模型) | 3 | kV | 人体模型 | 3 | |||
| 管脚温度 (焊接 10 秒) | 260 | °C | 焊接 10 秒 | 3 | |||
| 工作环境温度 | -40 | 125 | °C | 3 | |||
| VDD 正常工作电压 | VDD_Op | 10 | 11.5 | 13 | V | 3 | |
| VDD 欠压保护电压 | VDD_OFF | 7 | 8 | 9 | V | 3 | |
| 工作电流 | IVDD_Op | 80 | 150 | 300 | uA | Fsw=7KHz | 3 |
| 启动电流 | IVDD_st | 300 | 700 | uA | 3 | ||
| 过压保护阈值 | VFB_OVP | 1.9 | 2 | 2.1 | V | 3 | |
| 最长关断时间 | Toff_max | 195 | 270 | 350 | us | 备注 2 not printed in row | 4 |
| 峰值电流基准 | Vcs(max) | 1.4 | 1.5 | 1.6 | V | 4 | |
| 恒流输出基准 | VCC_REF | 194 | 200 | 206 | mV | 4 | |
| HV 漏电流 | IHV_leak | 10 | 40 | 60 | uA | 4 | |
| COMP 高箝位电压 | Vcomp_H | 3 | V | 4 | |||
| COMP 低箝位电压 | Vcomp_L | 0.7 | V | 4 | |||
| 过热保护阈值 | TSD | 150 | °C | 备注 2 | 4 | ||
| HV 充电电流 | IHV | 10 | mA | Drain =20V | 4 | ||
| 最短关断时间 | Toff_min | 2 | us | 备注 2 | 3 | ||
| 最长导通时间 | Ton_max | 40 | us | 备注 2 | 4 | ||
| 最高开关频率 | Fmax | 100 | KHz | 4 | |||
| 电流采样前沿消隐时间 | TLEB | 300 | ns | 4 | |||
| 过流检测延时 | TD_OC | 100 | ns | 4 | |||
| VDD 箝位电压 | VDD_Clamp | 14 | V | I(VDD ) = 5 mA | 3 | ||
| 消磁检测阈值 | VFB_DEM | 0.2 | V | 3 | |||
| 封装热阻---结到环境(SOP-8) | 165 | °C/W | 结到环境 SOP-8 | 3 |
CAD (KiCad official)
- Symbol:
KP106SPA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
kp106spa-etched.step/kp106spa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kp106spa.step/kp106spa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Kiwi Instruments datasheet, copy hosted by LCSC (6 pp, sha256
7802168d854d31f3, retrieved 2026-11-21) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KP106SPA
**Kiwi Instruments** · LED Drivers · SOP-8
KP106SPA from Kiwi Instruments, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | input | Constant-current loop compensation pin; a 1-4.7uF ceramic capacitor to the chip reference ground is recommended, with COMP clamped between 0.7 V and 3 V. |
| 2 | GND | power_in | Chip reference ground. |
| 3 | VDD | power_in | Chip supply pin with normal operating voltage 10 to 13 V, undervoltage lockout at 7 to 9 V, and VDD DC supply rating of 14 V. |
| 4 | FB | input | Inductor current demagnetization detection and output overvoltage protection pin, with OVP threshold of 1.9 to 2.1 V. |
| 5 | CS | input | Current sense input pin with 300 ns leading-edge blanking time and peak current reference of 1.4 to 1.6 V. |
| 6 | GATE | output | Drive output for the high-voltage MOSFET, with GATE voltage rated -0.3 to 14 V. |
| 7 | NC | unconnected | Non-functional pin that is left floating in the application. |
| 8 | HV | power_in | Input for the internal high-voltage start-up and supply circuit, with HV voltage rated -0.3 to 600 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Kiwi Instruments |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| HV 电压 | | -0.3 | | 600 | V | | 3 |
| VDD 直流供电电压 | | | | 14 | V | | 3 |
| VDD 直流箝位电流 | | | | 10 | mA | | 3 |
| CS, FB, COMP 电压 | | -0.3 | | 7 | V | | 3 |
| GATE 电压 | | -0.3 | | 14 | V | | 3 |
| 芯片工作结温 | | | | 150 | °C | | 3 |
| 储藏温度 | | -65 | | 150 | °C | | 3 |
| ESD 能力 (人体模型) | | | | 3 | kV | 人体模型 | 3 |
| 管脚温度 (焊接 10 秒) | | | | 260 | °C | 焊接 10 秒 | 3 |
| 工作环境温度 | | -40 | | 125 | °C | | 3 |
| VDD 正常工作电压 | VDD_Op | 10 | 11.5 | 13 | V | | 3 |
| VDD 欠压保护电压 | VDD_OFF | 7 | 8 | 9 | V | | 3 |
| 工作电流 | IVDD_Op | 80 | 150 | 300 | uA | Fsw=7KHz | 3 |
| 启动电流 | IVDD_st | | 300 | 700 | uA | | 3 |
| 过压保护阈值 | VFB_OVP | 1.9 | 2 | 2.1 | V | | 3 |
| 最长关断时间 | Toff_max | 195 | 270 | 350 | us | 备注 2 not printed in row | 4 |
| 峰值电流基准 | Vcs(max) | 1.4 | 1.5 | 1.6 | V | | 4 |
| 恒流输出基准 | VCC_REF | 194 | 200 | 206 | mV | | 4 |
| HV 漏电流 | IHV_leak | 10 | 40 | 60 | uA | | 4 |
| COMP 高箝位电压 | Vcomp_H | | | 3 | V | | 4 |
| COMP 低箝位电压 | Vcomp_L | 0.7 | | | V | | 4 |
| 过热保护阈值 | TSD | | | 150 | °C | 备注 2 | 4 |
| HV 充电电流 | IHV | | 10 | | mA | Drain =20V | 4 |
| 最短关断时间 | Toff_min | | 2 | | us | 备注 2 | 3 |
| 最长导通时间 | Ton_max | | 40 | | us | 备注 2 | 4 |
| 最高开关频率 | Fmax | | 100 | | KHz | | 4 |
| 电流采样前沿消隐时间 | TLEB | | 300 | | ns | | 4 |
| 过流检测延时 | TD_OC | | 100 | | ns | | 4 |
| VDD 箝位电压 | VDD_Clamp | | 14 | | V | I(VDD ) = 5 mA | 3 |
| 消磁检测阈值 | VFB_DEM | | 0.2 | | V | | 3 |
| 封装热阻---结到环境(SOP-8) | | | 165 | | °C/W | 结到环境 SOP-8 | 3 |
## CAD (KiCad official)
- Symbol: `KP106SPA`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `kp106spa-etched.step` / `kp106spa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `kp106spa.step` / `kp106spa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Kiwi Instruments datasheet, copy hosted by LCSC](docs/kp106spa-datasheet.pdf) (6 pp, sha256 `7802168d854d31f3`, retrieved 2026-11-21)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/kp106spa-datasheet.pdf)