KiCad - the KiCad Bridge

@@ -10,6 +10,20 @@ unnamed. These entries were reconstructed after the fact from the work they contain, which is exactly the situation the mandatory-notes gate now prevents. Treat them as accurate but secondhand. +## 1.0.76  (2026-10-28 21:31 UTC)++NATIVE (Rust) build. 1.0.76: fanout conflicts, routes that know the pours, the tour template back, and the standard's engine 0.10.0.++- **kicad_plan_fanout:** conflicts[] lists every planned via and stub closer than the clearance to another net's pad anywhere on the board, measured by the pad's real outline. Vias count on every layer, stubs on their own layer (standard #22).+- **kicad_plan_route** (engine 0.10.0, standard #21):+  - crossesPours names other nets' pours the route runs through, and avoidPours:true keeps it out of them;+  - through vias are checked on every copper layer;+  - the board's strictest clearance rule decides.+- **kicad_place_decoupling:** a cap the plan can't move keeps its spot, so no other cap is planned onto it.+- **Tour template (wiki #136):** tour-pack/template is rebuilt: one AdomTour R_AdomTour on a sheet, a small board and a project. The default kicad-tour pack has its files again.+  - KiCad 10.0.7 opens all three; the only ERC/DRC findings are the unconnected resistor and the AdomTour library, which the tour installs.+  - The 7 schematic unit tests that read it pass again.+ ## 1.0.75  (2026-10-28 21:05 UTC)  NATIVE (Rust) build. 1.0.75: decoupling caps sorted by the IC they belong to, routes planned at the board's net class, and the standard's engine 0.7.0.