KiCad - the KiCad Bridge

@@ -10,6 +10,18 @@ unnamed. These entries were reconstructed after the fact from the work they contain, which is exactly the situation the mandatory-notes gate now prevents. Treat them as accurate but secondhand. +## 1.0.84  (2026-10-29 19:49 UTC)++NATIVE (Rust) build. 1.0.84: a whole-board design review, and the standard's engine 0.17.2.++- **kicad_review_board (new; the standard's review_board):** one read of the board, and of the schematic beside it through KiCad's own netlist, reviewed by the standard's engine.+  - Finds duplicate designators, parts off the board or near its edge, placeholder values on the board and the sheets, one-pin nets, parts without a footprint, missing vendor part numbers and datasheets, and disabled or missing design rules.+  - Board Setup's clearance, track width and minimum through hole go in as the board's rules. KiCad's DRC always checks shorts, clearance, track width and hole size, so no rule class reads as missing on a KiCad board.+  - skipped and notImplemented name what it could not judge (a placement grid needs gridMm; decoupling is kicad_schematic_review's job).+  - Checked: the rp2040 sample's 12 PIN** test points come back as a duplicate designator, its 20 parts without vendor part numbers as warnings.+- **kicad_schematic_review:** each part now carries its value and comment too.+- **Engine:** adom-eda-checks 0.17.2 (EDA Bridge Standard 0.20.2).+ ## 1.0.83  (2026-10-29 19:26 UTC)  NATIVE (Rust) build. 1.0.83: a schematic review before the board is updated, and the standard's engine 0.16.0.