main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs kf50bdt-tr: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain STE… · Ray
viewers kf50bdt-tr: viewers · Ray
kf50bdt-tr-etched.fit.json kf50bdt-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
kf50bdt-tr-etched.glb kf50bdt-tr: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain STE… · Ray
kf50bdt-tr-etched.step kf50bdt-tr: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain STE… · Ray
kf50bdt-tr.glb Publish 0.1.0 · Ray
kf50bdt-tr.kicad_mod Publish 0.1.0 · Ray
kf50bdt-tr.kicad_sym Publish 0.1.0 · Ray
kf50bdt-tr.lbr Publish 0.1.0 · Ray
kf50bdt-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json kf50bdt-tr: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain STE… · Ray
README.md kf50bdt-tr: specified limits as data (metadata.characteristics, 24 rows from the datasheet) · Ray

KF50BDT-TR

STMicroelectronics · DC-DC Converters · DPAK

KF50BDT-TR from STMicroelectronics, in a DPAK. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INPUT power_in Unregulated DC input supply. Operating range up to 20 V (absolute max -0.5 to 20 V). For a 5 V output the recommended minimum input voltage is 6 V (allowing 500 mA with a 0.4 V typical dropout). Bypass with a 0.1 µF ceramic capacitor to GND close to the pin.
2 GND power_in Device ground reference. This pin is electrically connected to the exposed DPAK thermal tab, which must be soldered to the PCB ground copper for heat sinking (RthJC = 8 °C/W, RthJA = 100 °C/W).
3 OUTPUT power_out Regulated 5 V output (4.9 V min / 5.1 V max at 25 °C, ±2 % accuracy). Delivers up to 500 mA with internal current limit (~1 A typ.) and thermal shutdown. Requires a minimum 2.2 µF output capacitor (ESR 0.1 to 10 Ω) for loop stability.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DPAK
Category PMIC
Pins 3

Ordering variants

  • KF50BDT-TR
  • KF50BDT-TRBD-TR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (IO = 50 mA, VI = 7 V) VO 4.9 5 5.1 V IO = 50 mA, VI = 7 V 8
Output voltage over temperature VO 4.8 5.2 V IO = 50 mA, VI = 7 V, Ta = -25 to 85°C 8
Operating input voltage VI 20 V IO = 500 mA 8
Output current limit IO 1 A 8
Line regulation VO 3 18 mV VI = 6 to 20 V, IO = 5 mA 8
Load regulation VO 2 50 mV VI = 6.3 V, IO = 5 to 500 mA 8
Quiescent current ON mode (no load) Id 0.5 1 mA VI = 6 to 20 V, IO = 0 mA, ON MODE 8
Quiescent current ON mode (IO = 500 mA) Id 12 mA VI = 6.3 to 20 V, IO = 500 mA 8
Quiescent current OFF mode Id 50 100 µA VI = 6 V OFF MODE 8
Supply voltage rejection f = 120 Hz SVR 76 dB IO = 5 mA, VI = 7 ± 1 V, f = 120 Hz 8
Supply voltage rejection f = 1 kHz SVR 71 dB IO = 5 mA, VI = 7 ± 1 V, f = 1 kHz 8
Supply voltage rejection f = 10 kHz SVR 60 dB IO = 5 mA, VI = 7 ± 1 V, f = 10 kHz 8
Output noise voltage eN 50 µV B = 10 Hz to 100 kHz 8
Dropout voltage (IO = 200 mA) Vd 0.2 0.35 V IO = 200 mA 8
Dropout voltage (IO = 500 mA) Vd 0.4 0.7 V IO = 500 mA 8
Control input logic low VIL 0.8 V Ta = -40 to 125°C 8
Control input logic high VIH 2 V Ta = -40 to 125°C 8
Control input current II 10 µA VI = 6 V, VC = 6 V 8
Output bypass capacitance CO 2 10 µF ESR = 0.1 to 10, IO = 0 to 500 mA 8
DC input voltage VI -0.5 20 V 5
Storage temperature range TSTG -40 150 °C 5
Operating junction temperature range TOP -40 125 °C 5
Thermal resistance junction-ambient (DPAK) RthJA 100 °C/W DPAK 5
Thermal resistance junction-case (DPAK) RthJC 8 °C/W DPAK 5

CAD (KiCad official)

  • Symbol: KF50BDT-TR
  • Footprint: Package_TO_SOT_SMD:TO-252-2
  • 3D model: DPAK (KiCad packages3D, STEP)
  • 3D model files: kf50bdt-tr-etched.step / kf50bdt-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); kf50bdt-tr.step / kf50bdt-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 df5ebcf00a2fe0af, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF