Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

K2614318182020

KYX · Crystals · DT-26

K2614318182020 from KYX, in a DT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of a two-terminal crystal; either orientation.
2 2 passive Terminal 2 of a two-terminal crystal; either orientation.

Key specifications

Parameter Value
Manufacturer KYX
Package DT-26
Category Crystals/Oscillators/Resonators
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency tolerance (调整频差) -20 20 ppm at 20±2℃ 3
Temperature frequency tolerance (温度频差) -20 20 ppm 3
Aging rate (年老化率) -5 5 ppm/year 3
Resonance resistance (谐振电阻) 60 Ω 3
Static capacitance (静态电容) 7 pF 3
Frequency change after free fall (自由跌落后频差) -5 5 ppm free drop from 35cm onto 2cm rubber board, 3 drops 3
Frequency change after vibration (振动后频率变化) -20 20 ppm 10-55Hz, 0.75mm amplitude, X/Y/Z 30 min each 3
Frequency change after high-temperature aging (高温老化频率变化) -5 5 ppm 120℃±2℃ aging 48 h, then 2 h recovery at room temperature 3
Resistance change after high-temperature aging (高温老化电阻变化) -25 25 Ω 120℃±2℃ aging 48 h, then 2 h recovery at room temperature 3
Insulation resistance (绝缘阻抗) 500 MΩ DC100±15V 3
Nominal frequency (标称频率) 14.3182 MHz fundamental mode 3
Load capacitance (负载电容) 20 pF 3
Drive level (激励功率) 100 μW 3

CAD (KiCad official)

  • Symbol: K2614318182020
  • Footprint: Crystal:Crystal_DS26_D2.0mm_L6.0mm_Vertical
  • 3D model: DT-26 (KiCad packages3D, STEP)
  • 3D model files: k2614318182020-etched.step / k2614318182020-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); k2614318182020.step / k2614318182020.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: KYX datasheet (4 pp, sha256 ``, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary crystal numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF