main
Ray
Publish 0.1.0
6ca5a90
K1206L300AR
KUU · Resettable Fuses · 1206
K1206L300AR from KUU, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Unpolarized PPTC terminal; device rated Vmax 6.0 Vdc, Ihold 3.00 A, Itrip 6.00 A, Imax 35 A, with the two terminals interchangeable. |
| 2 | 2 | passive | Unpolarized PPTC terminal; device rated Vmax 6.0 Vdc, Ihold 3.00 A, Itrip 6.00 A, Imax 35 A, with the two terminals interchangeable. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | KUU |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance prior to tripping, minimum (Ri min) | Ri min | 0.01 | Ω | 25°C | 1 | ||
| Maximum resistance one hour post reflow (R1max) | R1max | 0.05 | Ω | measured one hour post reflow | 1 | ||
| Maximum operating voltage | Vmax | 6 | V dc | at rated current (Imax) | 1 | ||
| Maximum fault current | Imax | 35 | A | at rated voltage (Vmax) | 1 | ||
| Hold current (maximum current device will not trip) | I hold | 3 | A | 25°C still air | 1 | ||
| Trip current (minimum current device always trips) | I trip | 6 | A | 25°C still air | 1 | ||
| Ambient operating temperature | -40 | 85 | °C | ambient operating conditions | 1 | ||
| Maximum surface temperature in tripped state | 125 | °C | device in the tripped state | 1 | |||
| Reflow peak temperature (Tp), Pb-free | Tp | 260 | °C | Pb-free assembly profile, peak temperature | 2 | ||
| Average ramp-up rate (Ts max to Tp) | 3 | °C/second | Ts max to Tp, Pb-free assembly profile | 2 | |||
| Ramp-down rate | 6 | °C/second | Pb-free assembly profile | 2 | |||
| Time from 25°C to peak temperature | 8 | minutes | 25°C to peak temperature | 2 | |||
| Preheat temperature (Ts min to Ts max) | Ts | 150 | 200 | °C | preheat, Ts min to Ts max | 2 | |
| Preheat time (Ts min to Ts max) | ts | 60 | 180 | s | preheat, Ts min to Ts max | 2 | |
| Time maintained above TL | tL | 60 | 150 | s | time maintained above TL 217°C | 2 | |
| Time within profile peak window (TP) | tP | 20 | 40 | s | TP as printed in profile | 2 | |
| Storage temperature | 0 | 30 | °C | storage condition | 2 | ||
| Storage relative humidity | 30 | 60 | %RH | storage condition | 2 | ||
| Time-to-trip test (trip after 8.00 A) | 4 | s | at 8.00 A time-to-trip test current | 1 | |||
| Power dissipation in tripped state | Pd | 1 | W | tripped state, 25°C still air, at rated voltage | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 4.05 | A | ambient -40°C | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 3.66 | A | ambient -20°C | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 3.36 | A | ambient 0°C | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 3 | A | ambient 25°C | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 2.5 | A | ambient 40°C | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 2.28 | A | ambient 50°C | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 2 | A | ambient 60°C | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 1.62 | A | ambient 70°C | 1 | ||
| Recommended hold current at ambient temperature | I HOLD | 1.35 | A | ambient 85°C | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | tin | Terminal pad materials:Tin-plated Nickel-Copper | 3 |
CAD (KiCad official)
- Symbol:
K1206L300AR - Footprint:
Fuse:Fuse_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
k1206l300ar-etched.step/k1206l300ar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);k1206l300ar.step/k1206l300ar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: KUU datasheet (3 pp, sha256
721b9028d85f951d, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# K1206L300AR
**KUU** · Resettable Fuses · 1206
K1206L300AR from KUU, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Unpolarized PPTC terminal; device rated Vmax 6.0 Vdc, Ihold 3.00 A, Itrip 6.00 A, Imax 35 A, with the two terminals interchangeable. |
| 2 | 2 | passive | Unpolarized PPTC terminal; device rated Vmax 6.0 Vdc, Ihold 3.00 A, Itrip 6.00 A, Imax 35 A, with the two terminals interchangeable. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | KUU |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance prior to tripping, minimum (Ri min) | Ri min | 0.01 | | | Ω | 25°C | 1 |
| Maximum resistance one hour post reflow (R1max) | R1max | | | 0.05 | Ω | measured one hour post reflow | 1 |
| Maximum operating voltage | Vmax | | | 6 | V dc | at rated current (Imax) | 1 |
| Maximum fault current | Imax | | | 35 | A | at rated voltage (Vmax) | 1 |
| Hold current (maximum current device will not trip) | I hold | | | 3 | A | 25°C still air | 1 |
| Trip current (minimum current device always trips) | I trip | 6 | | | A | 25°C still air | 1 |
| Ambient operating temperature | | -40 | | 85 | °C | ambient operating conditions | 1 |
| Maximum surface temperature in tripped state | | | | 125 | °C | device in the tripped state | 1 |
| Reflow peak temperature (Tp), Pb-free | Tp | | | 260 | °C | Pb-free assembly profile, peak temperature | 2 |
| Average ramp-up rate (Ts max to Tp) | | | | 3 | °C/second | Ts max to Tp, Pb-free assembly profile | 2 |
| Ramp-down rate | | | | 6 | °C/second | Pb-free assembly profile | 2 |
| Time from 25°C to peak temperature | | | | 8 | minutes | 25°C to peak temperature | 2 |
| Preheat temperature (Ts min to Ts max) | Ts | 150 | | 200 | °C | preheat, Ts min to Ts max | 2 |
| Preheat time (Ts min to Ts max) | ts | 60 | | 180 | s | preheat, Ts min to Ts max | 2 |
| Time maintained above TL | tL | 60 | | 150 | s | time maintained above TL 217°C | 2 |
| Time within profile peak window (TP) | tP | 20 | | 40 | s | TP as printed in profile | 2 |
| Storage temperature | | 0 | | 30 | °C | storage condition | 2 |
| Storage relative humidity | | 30 | | 60 | %RH | storage condition | 2 |
| Time-to-trip test (trip after 8.00 A) | | | 4 | | s | at 8.00 A time-to-trip test current | 1 |
| Power dissipation in tripped state | Pd | | 1 | | W | tripped state, 25°C still air, at rated voltage | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 4.05 | | A | ambient -40°C | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 3.66 | | A | ambient -20°C | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 3.36 | | A | ambient 0°C | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 3 | | A | ambient 25°C | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 2.5 | | A | ambient 40°C | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 2.28 | | A | ambient 50°C | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 2 | | A | ambient 60°C | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 1.62 | | A | ambient 70°C | 1 |
| Recommended hold current at ambient temperature | I HOLD | | 1.35 | | A | ambient 85°C | 1 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | tin | Terminal pad materials:Tin-plated Nickel-Copper | 3 |
## CAD (KiCad official)
- Symbol: `K1206L300AR`
- Footprint: `Fuse:Fuse_1206_3216Metric`
- 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files: `k1206l300ar-etched.step` / `k1206l300ar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `k1206l300ar.step` / `k1206l300ar.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [KUU datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604432289250095104) (3 pp, sha256 `721b9028d85f951d`, retrieved 2026-11-07, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/k1206l300ar-datasheet.pdf)