component

JY1117EAX

Public Made by Adom

by adom

Shenzhen JingYang Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)jy1117eaxfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 16d ago
viewers jy1117eax: viewers · Ray 16d ago
jy1117eax-etched.glb Publish 0.1.0 · Ray 16d ago
jy1117eax-etched.step jy1117eax: factory component page (tier=lcsc) · Ray 16d ago
jy1117eax-hero.glb jy1117eax: hero GLB from the etched model (keeps the MPN mark) · Ray 16d ago
jy1117eax-hero.overlay.json Publish 0.1.0 · Ray 16d ago
jy1117eax.glb Publish 0.1.0 · Ray 16d ago
jy1117eax.kicad_mod Publish 0.1.0 · Ray 16d ago
jy1117eax.kicad_sym Publish 0.1.0 · Ray 16d ago
jy1117eax.lbr Publish 0.1.0 · Ray 16d ago
jy1117eax.step Publish 0.1.0 · Ray 16d ago
package.json Publish 0.1.0 · Ray 16d ago
page.json Set visibility: public · Ray 16d ago
README.md Publish 0.1.0 · Ray 16d ago

JY1117EAX

Shenzhen JingYang · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4

JY1117EAX from Shenzhen JingYang, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Adj (GND) input A resistor divider from this pin to the VOUT pin and ground sets the output voltage in adjustable mode (ground only for fixed-mode parts).
2 VOUT power_out Regulator output; needs a minimum 0.2uF X7R/X5R ceramic, or a 3.3uF to 100uF electrolytic with 10mOhm to 1Ohm ESR, to ground for stability.
3 VIN power_in Regulator input (absolute max -0.3 to 15 V, operating 2.7 to 12 V) that must always be at least 1.5V higher than VOUT for regulation, with a storage capacitor to ground.
4 TAB (VOUT) passive The package tab is connected to VOUT; the datasheet recommends a 5mm*5mm multilayer PCB copper area for heat dissipation.

Key specifications

Parameter Value
Manufacturer Shenzhen JingYang
Package SOT-223-4
Category Power Management (PMIC)
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operation Input Voltage 2.7 12 V 5
Reference Voltage 1.225 1.25 1.275 V IOUT = 10mA, TJ=25°C, (VIN-OUT)=1.5V 5
Line Regulation -XXX 0.2 0.5 % IOUT=10mA, VOUT+1.5V< VIN<12V, TJ=25°C (Note 1,2) 5
Load Regulation -ADJ 0.4 1 % VIN=2.7V, 10mA≤IOUT≤1A, TJ=25°C (Note 1,2) 5
Dropout Voltage -ADJ/1.2/1.5/1.8/2.5/3.3/5.0 (VIN-VOUT) 1.2 1.4 V IOUT = 1A, ΔVOUT=1%VOUT 6
Minimum Load Current -XXX 5 7 mA 0°C≤Tj≤125°C 6
Adjust Pin Current -ADJ 50 100 uA (VIN-VOUT) = 1.5V, IOUT=10mA 6
Ripple Rejection -XX 50 60 70 dB F=120Hz, COUT=10μf, 0.2μf, (VIN-VOUT) = 1.5V 6
DC Supply Voltage VIN -0.3 15 V 4
Operating Junction Temperature Range Top -40 125 °C 4
Maximum Junction Temperature TMJ 150 °C 4
Power Dissipation SOT-223 (with heat sink) PD 1300 mW Heat sink area 5mm*5mm; TA=25°C, TJ=125°C 4
Power Dissipation SOT-223 (no heat sink) PD 850 mW No heat sink; no air flow; TA=25°C, TJ=125°C 4
Storage Temperature TST -65 150 °C 4
Current Limit -ADJ/1.2/1.5/1.8/2.5/3.3/5.0 1 A (VIN-VOUT) = 1.5V 6
Temperature Stability 0.5 % IOUT=10mA 6
Thermal Shutdown Temperature 145 °C Over temperature protect 6
Thermal Shutdown Hysteresis 40 °C 6
Lead Temperature 260 °C 6
Thermal Resistance Junction-to-Ambient SOT-223 (heat sink) TJA 75 °C/W Note4: tab connected to 5mm*5mm PCB copper area 6
Thermal Resistance Junction-to-Ambient SOT-223 (no heat sink) TJA 117 °C/W No heat sink; no air flow 6
Thermal Resistance Junction-to-Case SOT-223 TJC 15 °C/W 6

CAD (KiCad official)

  • Symbol: JY1117EAX
  • Footprint: Package_TO_SOT_SMD:SOT-223
  • 3D model: SOT-223-4 (KiCad packages3D, STEP)
  • 3D model files: jy1117eax-etched.step / jy1117eax-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); jy1117eax.step / jy1117eax.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen JingYang datasheet (14 pp, sha256 97ed62f40fae69c5, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF