component
JY1105-L180BX
Public Made by Adomby adom
Shenzhen JingYang Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
JY1105-L180BX
Shenzhen JingYang · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT23-5L
JY1105-L180BX from Shenzhen JingYang, in a SOT23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, operating range 1.7V to 6.0V, with a 1uF or greater capacitor to ground placed close to the device. |
| 2 | VSS | power_in | Ground pin (VSS) of the regulator. |
| 3 | EN | input | Active-high enable input, high level 1.2V to 6V and low level 0.3V max; pulled down internally by 4MΩ, so open or low puts the device in standby with 0.2uA max. |
| 4 | NC/ADJ | unconnected | No connect on the fixed-output JY1105NF such as the L180 version, and feedback Adj input (0.6V reference) only on the adjustable JY1105AF. |
| 5 | VOUT | power_out | Regulated output pin, 500mA maximum output current, with a 1uF or greater output capacitor to ground (3.3uF for Vout below 1.2V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SOT23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (1.35V ≤ Vout), at +25°C | Vout | -1.5 | 1.5 | % | Ta=+25°C, 1.35V≤Vout | 1 | |
| Output voltage (ratio to nominal Vout) | Vout | 0.985 | 1.015 | ×Vout | Vin=Vout+1.0V, Iout=30mA | 6 | |
| Input voltage range | Vin | 1.7 | 6 | V | 7 | ||
| Current consumption | Iopr | 60 | 90 | uA | Vin=Vout+1.0V, Iout=0mA | 7 | |
| Standby current | Istb | 0.02 | 0.2 | uA | EN=Vss | 7 | |
| EN high level voltage | Venh | 1.2 | 6 | V | 7 | ||
| EN low level voltage | Venl | 0.3 | V | 7 | |||
| EN high level current | Ienh | 0.3 | 5 | uA | EN=Vin=6.0V | 7 | |
| EN low level current | Ienl | -0.1 | 0.1 | uA | 7 | ||
| Ripple rejection | Rr | 75 | dB | Vin=Vout+1.0V, f=1KHz, Vrip=0.5Vp-p, Iout=30mA | 7 | ||
| Limit current | Ilimit | 450 | 600 | mA | Vin=Vout+1.0V | 7 | |
| Short circuit current | Ishort | 100 | mA | Vin=Vout+1.0V, Vout=0V | 7 | ||
| Output voltage temperature coefficient | ΔVout/ΔTa·Vout | -20 | 20 | ppm/°C | Iout=30mA, Ta= -40°C to +85°C | 7 | |
| Cout auto-discharge resistance | Rdis | 100 | Ω | Vin=6.0V, Vout=4.0V, EN=Vss | 7 | ||
| Thermal shutdown temperature | Ttsd | 150 | °C | Shutdown, temperature increasing | 7 | ||
| Thermal shutdown release temperature | Ttsr | 120 | °C | Release, temperature decreasing | 7 | ||
| Line regulation | ΔVout/(ΔVin•Vout) | 0.01 | 0.1 | abs(%/V) | Vout+1.0V≤Vin≤6.0V, Iout=30mA | 7 | |
| Nominal fixed output voltage (L180 variant) | Vout | 1.8 | V | 3 | |||
| Maximum output current | Iout | 500 | mA | Maximum output current (features) | 1 | ||
| Input voltage (absolute maximum) | Vin | -0.3 | 7 | V | 6 | ||
| Output voltage (absolute maximum) | Vout | -0.3 | V | Printed as Vss-0.3 to Vin+0.3 V; upper bound is Vin+0.3 V | 6 | ||
| EN voltage range (absolute maximum) | VEN | -0.3 | 7 | V | 6 | ||
| Power dissipation | Pd | 400 | mW | On PCB | 6 | ||
| Operating temperature range | Topr | -40 | 85 | °C | 6 | ||
| Storage temperature range | Tstg | -55 | 125 | °C | 6 | ||
| Maximum junction temperature | Tj | 125 | °C | For reliable operation | 10 |
CAD (KiCad official)
- Symbol:
JY1105-L180BX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5L (KiCad packages3D, STEP)
- 3D model files:
jy1105-l180bx-etched.step/jy1105-l180bx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jy1105-l180bx.step/jy1105-l180bx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen JingYang datasheet (27 pp, sha256
dda4cb57226c29ea, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# JY1105-L180BX
**Shenzhen JingYang** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT23-5L
JY1105-L180BX from Shenzhen JingYang, in a SOT23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, operating range 1.7V to 6.0V, with a 1uF or greater capacitor to ground placed close to the device. |
| 2 | VSS | power_in | Ground pin (VSS) of the regulator. |
| 3 | EN | input | Active-high enable input, high level 1.2V to 6V and low level 0.3V max; pulled down internally by 4MΩ, so open or low puts the device in standby with 0.2uA max. |
| 4 | NC/ADJ | unconnected | No connect on the fixed-output JY1105NF such as the L180 version, and feedback Adj input (0.6V reference) only on the adjustable JY1105AF. |
| 5 | VOUT | power_out | Regulated output pin, 500mA maximum output current, with a 1uF or greater output capacitor to ground (3.3uF for Vout below 1.2V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SOT23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (1.35V ≤ Vout), at +25°C | Vout | -1.5 | | 1.5 | % | Ta=+25°C, 1.35V≤Vout | 1 |
| Output voltage (ratio to nominal Vout) | Vout | 0.985 | | 1.015 | ×Vout | Vin=Vout+1.0V, Iout=30mA | 6 |
| Input voltage range | Vin | 1.7 | | 6 | V | | 7 |
| Current consumption | Iopr | | 60 | 90 | uA | Vin=Vout+1.0V, Iout=0mA | 7 |
| Standby current | Istb | | 0.02 | 0.2 | uA | EN=Vss | 7 |
| EN high level voltage | Venh | 1.2 | | 6 | V | | 7 |
| EN low level voltage | Venl | | | 0.3 | V | | 7 |
| EN high level current | Ienh | 0.3 | | 5 | uA | EN=Vin=6.0V | 7 |
| EN low level current | Ienl | -0.1 | | 0.1 | uA | | 7 |
| Ripple rejection | Rr | | 75 | | dB | Vin=Vout+1.0V, f=1KHz, Vrip=0.5Vp-p, Iout=30mA | 7 |
| Limit current | Ilimit | 450 | 600 | | mA | Vin=Vout+1.0V | 7 |
| Short circuit current | Ishort | | 100 | | mA | Vin=Vout+1.0V, Vout=0V | 7 |
| Output voltage temperature coefficient | ΔVout/ΔTa·Vout | -20 | | 20 | ppm/°C | Iout=30mA, Ta= -40°C to +85°C | 7 |
| Cout auto-discharge resistance | Rdis | | 100 | | Ω | Vin=6.0V, Vout=4.0V, EN=Vss | 7 |
| Thermal shutdown temperature | Ttsd | | 150 | | °C | Shutdown, temperature increasing | 7 |
| Thermal shutdown release temperature | Ttsr | | 120 | | °C | Release, temperature decreasing | 7 |
| Line regulation | ΔVout/(ΔVin•Vout) | | 0.01 | 0.1 | abs(%/V) | Vout+1.0V≤Vin≤6.0V, Iout=30mA | 7 |
| Nominal fixed output voltage (L180 variant) | Vout | | 1.8 | | V | | 3 |
| Maximum output current | Iout | | | 500 | mA | Maximum output current (features) | 1 |
| Input voltage (absolute maximum) | Vin | -0.3 | | 7 | V | | 6 |
| Output voltage (absolute maximum) | Vout | -0.3 | | | V | Printed as Vss-0.3 to Vin+0.3 V; upper bound is Vin+0.3 V | 6 |
| EN voltage range (absolute maximum) | VEN | -0.3 | | 7 | V | | 6 |
| Power dissipation | Pd | | | 400 | mW | On PCB | 6 |
| Operating temperature range | Topr | -40 | | 85 | °C | | 6 |
| Storage temperature range | Tstg | -55 | | 125 | °C | | 6 |
| Maximum junction temperature | Tj | | | 125 | °C | For reliable operation | 10 |
## CAD (KiCad official)
- Symbol: `JY1105-L180BX`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT23-5L (KiCad packages3D, STEP)
- 3D model files: `jy1105-l180bx-etched.step` / `jy1105-l180bx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `jy1105-l180bx.step` / `jy1105-l180bx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shenzhen JingYang datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603178682622500864) (27 pp, sha256 `dda4cb57226c29ea`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/jy1105-l180bx-datasheet.pdf)