component
JW7111SSOTB#TRPBF
Public Made by Adomby adom
JoulWatt Tech Power Distribution Switches, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
JW7111SSOTB#TRPBF
JoulWatt Tech · Power Distribution Switches · SOT-23-6
JW7111SSOTB#TRPBF from JoulWatt Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input, connect a 10μF or greater ceramic capacitor from VIN to GND as close to the IC as possible; VIN operating range is 2.7V to 5.5V. |
| 2 | GND | power_in | Ground (0V). |
| 3 | EN | input | Enable input; on this active-high JW7111S variant, logic high turns on the power switch, with EN high-level input 1.4V minimum and EN voltage range 0V to 5.5V. |
| 4 | FLG | output | Active-low open-drain output, asserted during over-current and over-temperature; FAULT output low voltage is 180mV max at 1mA with a 7.5ms deglitch time. |
| 5 | ILIM | passive | Use an external resistor to set the current-limit threshold; recommended 10kΩ≦RLIM≦49.9kΩ. |
| 6 | VOUT | power_out | Output voltage; VOUT pin voltage is rated 0V to (VIN+0.2V) under recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JoulWatt Tech |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN PIN Voltage | VIN | -0.3 | 6.5 | V | 3 | ||
| VOUT PIN Voltage | VOUT | -0.3 | 6.5 | V | 3 | ||
| Other Pins Voltage | -0.3 | 6.5 | V | 3 | |||
| ILIM Source Current | 1 | mA | 3 | ||||
| Junction Temperature | 150 | ºC | 3 | ||||
| Storage Temperature | -65 | 150 | ºC | 3 | |||
| VIN PIN Voltage | VIN | 2.7 | 5.5 | V | 3 | ||
| VOUT PIN Voltage | VOUT | 0 | V | Max printed as VIN+0.2V | 3 | ||
| EN/EN̅̅̅̅ PIN Voltage | EN | 0 | 5.5 | V | 3 | ||
| Low-Level Input Voltage on EN/EN̅̅̅̅ | 0 | 0.5 | V | 3 | |||
| Operating Junction Temperature | TJ | -40 | 125 | ºC | 3 | ||
| Input UVLO (rising) | VUVLO | 2.4 | 2.65 | V | VIN Rising | 4 | |
| Input Shutdown Current | ISHDN | 0.1 | 1 | uA | VIN= 5.5V, Disabled, VOUT = Open | 4 | |
| Input Quiescent Current (RLIM=20kΩ) | IQ | 100 | 150 | uA | VIN= 5.5V, Enabled, VOUT = Open, RLIM=20kΩ | 4 | |
| Input Quiescent Current (RLIM=210kΩ) | IQ | 80 | 130 | uA | VIN= 5.5V, Enabled, VOUT = Open, RLIM=210kΩ | 4 | |
| Output Turn-On Rise Time (VIN=5.5V) | tR | 1.1 | 1.5 | ms | VIN= 5.5V, CL = 1μF, RLOAD = 100Ω. See Figure 1. | 4 | |
| Output Turn-On Rise Time (VIN=2.7V) | tR | 0.7 | 1 | ms | VIN= 2.7V, CL = 1μF, RLOAD = 100Ω. | 4 | |
| Output Turn-Off Fall Time (VIN=5.5V) | tF | 90 | 140 | us | VIN= 5.5V, CL = 1μF, RLOAD = 100Ω. See Figure 1. | 4 | |
| Output Turn-Off Fall Time (VIN=2.7V) | tF | 90 | 140 | us | VIN= 2.7V, CL = 1μF, RLOAD = 100Ω. | 4 | |
| EN High-Level Input Voltage (JW7111S) | VEN_H | 1.4 | V | JW7111S (Active High) | 5 | ||
| EN Low-Level Input Voltage (JW7111S) | VEN_L | 1 | V | JW7111S (Active High) | 5 | ||
| FAULT Output Low Voltage | VOL | 180 | mV | IFAULT = 1mA | 5 | ||
| FAULT Blanking and Latch Off Time (Over-Current) | tBlank_OC | 5 | 7.5 | 10 | ms | Assertion or de-assertion due to over current | 5 |
| FAULT Off Current | IFOH | 1 | uA | VFAULT = 6V | 5 | ||
| Current-Limit Threshold (JW7111S, RLIM=10kΩ) | ILIMIT | 2.2 | 2.4 | 2.6 | A | -40°C ~+85°C, VOUT = VIN -0.5V, RLIM = 10kΩ | 5 |
| Current-Limit Threshold (JW7111S, RLIM=15kΩ) | ILIMIT | 1.4 | 1.6 | 1.8 | A | -40°C ~+85°C, VOUT = VIN -0.5V, RLIM = 15kΩ | 5 |
| Current-Limit Threshold (JW7111S, RLIM=20kΩ) | ILIMIT | 1 | 1.2 | 1.4 | A | -40°C ~+85°C, VOUT = VIN -0.5V, RLIM = 20kΩ | 5 |
| Current-Limit Threshold (JW7111S, RLIM=50kΩ) | ILIMIT | 0.45 | 0.55 | 0.7 | A | -40°C ~+85°C, VOUT = VIN -0.5V, RLIM = 50kΩ | 5 |
| Current-Limit Threshold (ILIMIT shorted to GND) | ILIMIT | 2.2 | 2.4 | 2.6 | A | ILIMIT Shorted to GND | 5 |
| Short-Circuit Fold-back Current Limit | ISHORT | 0.6 | A | VOUT Connected to GND | 5 | ||
| Reverse-Voltage Comparator Trip Point | VRVP | 90 | 135 | 190 | mV | VOUT-VIN | 6 |
| Reverse Current Limit | IROCP | 0.72 | A | VOUT-VIN= 200mV | 6 | ||
| Thermal Shutdown Threshold | TSHDN | 160 | °C | Enabled, RLOAD = 1KΩ | 6 | ||
| Thermal Shutdown Threshold under Current Limit | TSHDN_OCP | 140 | °C | Enabled, RLOAD = 1KΩ | 6 | ||
| Thermal Shutdown Hysteresis | THYS | 20 | °C | 6 | |||
| Thermal Resistance Junction-to-Case (SOT23-6) | θJc | 130 | ºC/W | 3 | |||
| Output Discharge Resistance | RDIS | 75 | Ω | VIN= 5V, Disabled, IOUT =1mA | 5 | ||
| Short-Circuit Response Time | tSHORT | 2 | μs | VOUT= 0V to IOUT = ILIMIT (VOUT shorted to ground). See Figure 2. | 6 | ||
| Enable Turn-On Time | tON | 3 | ms | CL = 1μF, RL = 100Ω. See Figure 1. | 5 | ||
| Enable Turn-Off Time | tOFF | 1 | ms | CL = 1μF, RL = 100Ω. See Figure 1. | 5 |
CAD (KiCad official)
- Symbol:
JW7111SSOTB#TRPBF - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
jw7111ssotb-trpbf-etched.step/jw7111ssotb-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jw7111ssotb-trpbf.step/jw7111ssotb-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JoulWatt Tech datasheet (23 pp, sha256
d70927e01adbb973, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# JW7111SSOTB#TRPBF
**JoulWatt Tech** · Power Distribution Switches · SOT-23-6
JW7111SSOTB#TRPBF from JoulWatt Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input, connect a 10μF or greater ceramic capacitor from VIN to GND as close to the IC as possible; VIN operating range is 2.7V to 5.5V. |
| 2 | GND | power_in | Ground (0V). |
| 3 | EN | input | Enable input; on this active-high JW7111S variant, logic high turns on the power switch, with EN high-level input 1.4V minimum and EN voltage range 0V to 5.5V. |
| 4 | FLG | output | Active-low open-drain output, asserted during over-current and over-temperature; FAULT output low voltage is 180mV max at 1mA with a 7.5ms deglitch time. |
| 5 | ILIM | passive | Use an external resistor to set the current-limit threshold; recommended 10kΩ≦RLIM≦49.9kΩ. |
| 6 | VOUT | power_out | Output voltage; VOUT pin voltage is rated 0V to (VIN+0.2V) under recommended operating conditions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JoulWatt Tech |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN PIN Voltage | VIN | -0.3 | | 6.5 | V | | 3 |
| VOUT PIN Voltage | VOUT | -0.3 | | 6.5 | V | | 3 |
| Other Pins Voltage | | -0.3 | | 6.5 | V | | 3 |
| ILIM Source Current | | | | 1 | mA | | 3 |
| Junction Temperature | | | | 150 | ºC | | 3 |
| Storage Temperature | | -65 | | 150 | ºC | | 3 |
| VIN PIN Voltage | VIN | 2.7 | | 5.5 | V | | 3 |
| VOUT PIN Voltage | VOUT | 0 | | | V | Max printed as VIN+0.2V | 3 |
| EN/EN̅̅̅̅ PIN Voltage | EN | 0 | | 5.5 | V | | 3 |
| Low-Level Input Voltage on EN/EN̅̅̅̅ | | 0 | | 0.5 | V | | 3 |
| Operating Junction Temperature | TJ | -40 | | 125 | ºC | | 3 |
| Input UVLO (rising) | VUVLO | 2.4 | | 2.65 | V | VIN Rising | 4 |
| Input Shutdown Current | ISHDN | | 0.1 | 1 | uA | VIN= 5.5V, Disabled, VOUT = Open | 4 |
| Input Quiescent Current (RLIM=20kΩ) | IQ | | 100 | 150 | uA | VIN= 5.5V, Enabled, VOUT = Open, RLIM=20kΩ | 4 |
| Input Quiescent Current (RLIM=210kΩ) | IQ | | 80 | 130 | uA | VIN= 5.5V, Enabled, VOUT = Open, RLIM=210kΩ | 4 |
| Output Turn-On Rise Time (VIN=5.5V) | tR | | 1.1 | 1.5 | ms | VIN= 5.5V, CL = 1μF, RLOAD = 100Ω. See Figure 1. | 4 |
| Output Turn-On Rise Time (VIN=2.7V) | tR | | 0.7 | 1 | ms | VIN= 2.7V, CL = 1μF, RLOAD = 100Ω. | 4 |
| Output Turn-Off Fall Time (VIN=5.5V) | tF | | 90 | 140 | us | VIN= 5.5V, CL = 1μF, RLOAD = 100Ω. See Figure 1. | 4 |
| Output Turn-Off Fall Time (VIN=2.7V) | tF | | 90 | 140 | us | VIN= 2.7V, CL = 1μF, RLOAD = 100Ω. | 4 |
| EN High-Level Input Voltage (JW7111S) | VEN_H | 1.4 | | | V | JW7111S (Active High) | 5 |
| EN Low-Level Input Voltage (JW7111S) | VEN_L | | | 1 | V | JW7111S (Active High) | 5 |
| FAULT Output Low Voltage | VOL | | | 180 | mV | IFAULT = 1mA | 5 |
| FAULT Blanking and Latch Off Time (Over-Current) | tBlank_OC | 5 | 7.5 | 10 | ms | Assertion or de-assertion due to over current | 5 |
| FAULT Off Current | IFOH | | | 1 | uA | VFAULT = 6V | 5 |
| Current-Limit Threshold (JW7111S, RLIM=10kΩ) | ILIMIT | 2.2 | 2.4 | 2.6 | A | -40°C ~+85°C, VOUT = VIN -0.5V, RLIM = 10kΩ | 5 |
| Current-Limit Threshold (JW7111S, RLIM=15kΩ) | ILIMIT | 1.4 | 1.6 | 1.8 | A | -40°C ~+85°C, VOUT = VIN -0.5V, RLIM = 15kΩ | 5 |
| Current-Limit Threshold (JW7111S, RLIM=20kΩ) | ILIMIT | 1 | 1.2 | 1.4 | A | -40°C ~+85°C, VOUT = VIN -0.5V, RLIM = 20kΩ | 5 |
| Current-Limit Threshold (JW7111S, RLIM=50kΩ) | ILIMIT | 0.45 | 0.55 | 0.7 | A | -40°C ~+85°C, VOUT = VIN -0.5V, RLIM = 50kΩ | 5 |
| Current-Limit Threshold (ILIMIT shorted to GND) | ILIMIT | 2.2 | 2.4 | 2.6 | A | ILIMIT Shorted to GND | 5 |
| Short-Circuit Fold-back Current Limit | ISHORT | | | 0.6 | A | VOUT Connected to GND | 5 |
| Reverse-Voltage Comparator Trip Point | VRVP | 90 | 135 | 190 | mV | VOUT-VIN | 6 |
| Reverse Current Limit | IROCP | | 0.72 | | A | VOUT-VIN= 200mV | 6 |
| Thermal Shutdown Threshold | TSHDN | | 160 | | °C | Enabled, RLOAD = 1KΩ | 6 |
| Thermal Shutdown Threshold under Current Limit | TSHDN_OCP | | 140 | | °C | Enabled, RLOAD = 1KΩ | 6 |
| Thermal Shutdown Hysteresis | THYS | | 20 | | °C | | 6 |
| Thermal Resistance Junction-to-Case (SOT23-6) | θJc | | 130 | | ºC/W | | 3 |
| Output Discharge Resistance | RDIS | | 75 | | Ω | VIN= 5V, Disabled, IOUT =1mA | 5 |
| Short-Circuit Response Time | tSHORT | | 2 | | μs | VOUT= 0V to IOUT = ILIMIT (VOUT shorted to ground). See Figure 2. | 6 |
| Enable Turn-On Time | tON | | 3 | | ms | CL = 1μF, RL = 100Ω. See Figure 1. | 5 |
| Enable Turn-Off Time | tOFF | | 1 | | ms | CL = 1μF, RL = 100Ω. See Figure 1. | 5 |
## CAD (KiCad official)
- Symbol: `JW7111SSOTB#TRPBF`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `jw7111ssotb-trpbf-etched.step` / `jw7111ssotb-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `jw7111ssotb-trpbf.step` / `jw7111ssotb-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [JoulWatt Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838572300759040) (23 pp, sha256 `d70927e01adbb973`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/jw7111ssotb-trpbf-datasheet.pdf)