Generated by kicad-footprint-generator · KiCad file format 20260206
JW3510SOTA#TRPBF
Joulwatt(杰华特) · DC-DC Converters · SOT-23-5
JW3510SOTA#TRPBF from Joulwatt(杰华特), in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN/UVLO | input | Enable/undervoltage lockout pin: pulling it below 1.1V shuts down the JW3510, and an external resistor divider from VIN to ground can set a VIN UVLO threshold. |
| 2 | GND | power_in | Ground pin that must be tied directly to the local ground plane. |
| 3 | RFB | input | Feedback input where an external resistor connects to the transformer primary SW pin; the RFB resistor sets VOUT against an internal 10kΩ resistor and 1V reference, with a regulation current of 95 to 105µA (100µA typ), and the pin is rated VIN-0.5V to VIN with at most 200µA into RFB. |
| 4 | SW | output | Collector/drain node of the internal 65V N-channel DMOS power switch that carries large currents, rated 65V absolute maximum and 0V to 63V recommended. |
| 5 | VIN | power_in | Input supply pin that powers the internal circuitry and serves as the feedback reference, operating from 3.0V to 40V recommended (42V absolute maximum range in the electrical characteristics) and requiring local bypass to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Joulwatt(杰华特) |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 3 | 42 | V | 3 | ||
| EN/UVLO Threshold Rising | 1.1 | 1.2 | 1.3 | V | 3 | ||
| EN/UVLO Threshold Falling | 1 | 1.1 | 1.2 | V | 3 | ||
| VIN Quiescent Current, Sleep Mode | IQ | 150 | 170 | 250 | µA | Sleep Mode (Switch Off) | 3 |
| VIN Quiescent Current, Active Mode | IQ | 650 | 780 | 900 | µA | Active Mode (Switch On) | 3 |
| Minimum Switching Frequency | fMIN | 4 | 7 | 10 | kHz | 3 | |
| Minimum Switch-On Time | tON(MIN) | 300 | 350 | 400 | ns | 3 | |
| Minimum Switch-Off Time | tOFF(MIN) | 800 | ns | 3 | |||
| Maximum SW Current Limit | ISW(MAX) | 1.2 | 1.4 | 1.6 | A | 3 | |
| Minimum SW Current Limit | ISW(MIN) | 0.3 | 0.35 | 0.4 | A | 3 | |
| Switch On-Resistance | RDS(ON) | 0.5 | 0.6 | Ω | ISW = 500mA | 3 | |
| RFB Regulation Current | IRFB | 95 | 100 | 105 | µA | 3 | |
| RFB Regulation Current Line Regulation | 0.1 | %/V | 3.0V ≤ VIN ≤ 42V | 3 | |||
| Thermal Shutdown | TSDN | 140 | ºC | Shutdown temperature | 3 | ||
| Thermal Shutdown Hysteresis | 10 | ºC | Hysteresis | 3 | |||
| Internal Switching Frequency Clamp | 430 | kHz | Maximum switching frequency clamp (text: typ) | 5 | |||
| SW Pin Voltage (Absolute Maximum) | SW | 65 | V | 2 | |||
| VIN Pin Voltage (Absolute Maximum) | VIN | 42 | V | 2 | |||
| Current into RFB (Absolute Maximum) | 200 | µA | 2 | ||||
| Junction Temperature (Absolute Maximum) | TJ | 150 | ºC | 2 | |||
| Storage Temperature | -65 | 150 | ºC | 2 | |||
| Operating Junction Temperature | TJ | -40 | 125 | ºC | 2 | ||
| SW Pin Voltage (Recommended) | SW | 0 | 63 | V | 2 | ||
| VIN Pin Voltage (Recommended) | VIN | 3 | 40 | V | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | the copper area connected to GND pins. | 7 |
CAD (KiCad official)
- Symbol:
JW3510SOTA#TRPBF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
jw3510sota-etched.step/jw3510sota-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jw3510sota.step/jw3510sota.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Joulwatt(杰华特) datasheet (9 pp, sha256
839dfb46e6779c0b, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).