component

JSM6206A3.0XG

Public Made by Adom

by adom

JSMSEMI JSM6206A3 0XG Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmicjsm6206a3.0xg
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs jsm6206a3-0xg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
jsm6206a3-0xg-etched.fit.json jsm6206a3-0xg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
jsm6206a3-0xg-etched.glb jsm6206a3-0xg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
jsm6206a3-0xg-etched.step jsm6206a3-0xg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
jsm6206a3-0xg.glb Publish 0.1.0 · Ray
jsm6206a3-0xg.kicad_mod Publish 0.1.0 · Ray
jsm6206a3-0xg.kicad_sym Publish 0.1.0 · Ray
jsm6206a3-0xg.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
jsm6206a3-0xg.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json jsm6206a3-0xg: specified limits as data (metadata.characteristics, 17 rows from the datasheet) · Ray
README.md jsm6206a3-0xg: specified limits as data (metadata.characteristics, 17 rows from the datasheet) · Ray

JSM6206A3.0XG

JSMSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23

JSM6206A3.0XG from JSMSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS power_in Chip ground / negative supply reference. Connect to system ground (single-point ground recommended per application circuits).
2 VOUT power_out Regulated 3.0V output (±2.5% initial accuracy, ±3% overall). Delivers up to 250mA when Vin ≥ 4.3V; short-circuit current ~30mA and current-limit ~380mA. Requires ~1µF output capacitor (10µF used in test circuits).
3 VIN power_in Unregulated input supply. Operating range 1.8V to 6.5V absolute max; typical dropout 200mV at Iout=50mA for Vout(T) in 1.5-2.5V range. Requires ~1µF input capacitor.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • JSM6206A3.0XG
  • JSM6206A3.0XGPR
  • JSM6206A3.0XGM

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 1.8 8 V 3
Maximum output current IOUT (max) 100 mA VIN=VOUT(T)+1V 3
Dropout voltage Vdrop 160 240 mV IOUT=50mA, 2.6V≤VOUT(T)≤3.3V 3
Quiescent current ISS 7 μA VIN=VOUT(T)+1V 3
Load regulation ΔVOUT 20 mV VIN=VOUT(T)+1V, 1mA≤IOUT≤80mA 3
Input stability (line regulation) ΔVOUT/(ΔVIN·VOUT) 0.1 0.2 %/V IOUT=1mA, VOUT(T)+0.5V≤VIN≤5.5V 3
Output voltage temperature coefficient ΔVOUT/(ΔTa·VOUT) -100 100 ppm/℃ VIN=VOUT(T)+1V, IOUT=10mA, -40℃≤Ta≤85℃ 3
Power supply rejection ratio PSRR 40 dB VIN=[VOUT(T)+1]V +1Vp-pAC, IOUT=10mA, f=1kHz 3
Short-circuit current Ishort 30 mA VIN=VOUT(T)+1.5V, VOUT=VSS 3
Overcurrent protection current Ilimt 380 mA VIN=VOUT(T)+1.5V 3
Specified output voltage (from part number) VOUT(T) 3 V Output voltage code 3.0 in MPN JSM6206A3.0XG 2
Input voltage (absolute maximum) Vin 6.5 V 2
Output current (absolute maximum) Iout 500 mA 2
Maximum allowable power dissipation (SOT23) PD 300 mW SOT23 package 2
Operating temperature Tw -25 80 ℃ 2
Storage temperature Tc -40 125 ℃ 2
Soldering temperature Th 260 ℃ 10s 2

CAD (KiCad official)

  • Symbol: JSM6206A3.0XG
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: jsm6206a3-0xg-etched.step / jsm6206a3-0xg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); jsm6206a3-0xg.step / jsm6206a3-0xg.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
jsm6206a3-0xg.step 59 KB You want the bare part, or you mark your own boards.
jsm6206a3-0xg-etched.step 2.5 MB You want the part with JSM6206A3.0XG already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 590 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (8 pp, sha256 41c94b0785c705e8, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF