main
History Download
Ray Publish 0.1.0 aa31cd4

JSM545

JSMSEMI · Magnetic Sensors · SOT-23

JSM545 from JSMSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage is 3.0 V to 30 V for 2-wire operation, with reverse-voltage protection at the Vcc pin and an absolute maximum of 20 V for t < 1000 h.
2 GND power_in Ground reference for all voltages stated in the datasheet.
3 Vout output Open-drain output with recommended output voltage up to 30 V and output current up to 25 mA; output is forced to a high-impedance state on overtemperature or undervoltage faults.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOT-23
Category Sensors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 20 V t < 1000 h 9
Supply voltage VCC 34 V t < 96 h 9
Supply voltage VCC 36 V t < 5 min 9
Supply voltage VCC 40 V t < 5 x 400 ms; with series resistor RV > 100 9
Output voltage VOUT -0.5 V t < 1000 h 9
Output voltage VOUT 34 V t < 96 h 9
Output voltage VOUT 36 V t < 5 min 9
Output voltage VOUT 40 V t < 5 x 400 ms; with series resistor RL > 100 9
Output current IO 65 mA 9
Reverse output current IOR 50 mA 9
Ambient temperature range TA -40 170 °C t < 96 h; no cumulative stress 9
Supply voltage VCC 3 30 V 2-wire 10
Ambient temperature range TA -40 150 °C 10
Output voltage VOUT 30 V 10
Output current IOUT 25 mA 10
Low supply current Icclo 2 5 mA 2-wire 10
High supply current Icchi 12 17 mA 2-wire 11
Reverse current IccR 1 mA for Vcc = -18 V 11
Port low output voltage Vol 0.13 0.4 V IO = 20 mA 11
Port low output voltage Vol 0.5 V IO = 25 mA 11
Maximum latch-up free current at any pin Ilatch 100 100 mA AEC Q100-004, class 1 10
Human body model ESD VHBM 12 kV according to AEC Q100-002 10
Output refresh period tsamp 1.6 2 2.66 µs 11
Output fall time tf 1 µs Vcc = 12V; RL = 820; CL = 20 pF 11
Output rise time tr 1 µs 11
Output jitter tj 0.5 µs For square wave signal with 1 kHz 11
Delay time td 16 µs 11
Effective noise of magnetic switching points Bnoise 0.1 mT For square wave signal with 1 kHz 11
Enable time of output after settling of Vcc ten 50 µs VCC = 12V; B > Bon + 2 mT or B < Boff - 2 mT 11
Temperature coefficient of magnetic threshold (JSM545) TC 0 ppm/K 12
On point (JSM545) BON 6 mT 12
Off point (JSM545) BOFF 4 mT 12
Hysteresis (JSM545) BHYS 2 mT 12

CAD (KiCad official)

  • Symbol: JSM545
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: jsm545-etched.step / jsm545-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); jsm545.step / jsm545.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (12 pp, sha256 8d14acb9cf081f25, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF