main
Ray Publish 0.1.1 db84399
{
  "schema_version": 1,
  "type": "component",
  "slug": "jsm507",
  "title": "JSM507",
  "brief": "JSMSEMI Magnetic Sensors, TO-92S. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "sensors",
    "jsm507",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "JSM507",
    "manufacturer": "JSMSEMI",
    "package": "TO-92S",
    "pin_count": 3,
    "category": "Sensors",
    "subcategory": "Magnetic Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/8aee112c8f58613e336172224dcba743.pdf",
    "parts": {
      "symbol": "jsm507.kicad_sym",
      "footprint": "jsm507.kicad_mod",
      "model_3d": "jsm507-hero.glb",
      "model_3d_plain": "jsm507.glb",
      "model_3d_step": "jsm507-etched.step",
      "model_3d_step_plain": "jsm507.step",
      "lbr": "jsm507.lbr"
    },
    "distributor_links": {
      "lcsc": "C2900618"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T09:01:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin, operating range 2.7 V to 30 V with built-in reverse-voltage protection."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all voltages."
      },
      {
        "number": "3",
        "name": "Vout",
        "type": "output",
        "description": "Open-drain output, short-circuit protected, goes tri-state on overtemperature or undervoltage; rated up to 30 V and 25 mA recommended operating."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin assignment figure (Fig. 6) showing TO92S and SOT23 pin positions is not in the text; the table g"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0718,
        "at": "2026-10-23T09:01:30"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/8aee112c8f58613e336172224dcba743.pdf",
        "pages": 15,
        "sha256": "41bf77586cdc4842",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "jsm507.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          4.83,
          3.745,
          9.8
        ],
        "zmin_mm": -2.5,
        "centre_offset_mm": 0.542,
        "footprint_binding": "identity",
        "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "jsm507-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          4.83,
          3.745,
          9.8
        ],
        "zmin_mm": -2.5,
        "centre_offset_mm": 0.542,
        "footprint_binding": "identity",
        "sha256": "358879b8d30c09e4855431c9ba1ed71b0680c49ef2c31cbdd72f0c03dcc43b0b",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "JSMSEMI",
      "Package": "TO-92S",
      "Category": "Sensors",
      "Pins": "3"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "41bf77586cdc4842444aeb17fbba87bc8f56080288629d09405a014122d3c7d3",
      "rows": [
        {
          "name": "Supply voltage",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.7,
          "typ": null,
          "max": 30,
          "conditions": "3-wire",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Ambient temperature range",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Output voltage",
          "symbol": "VOUT",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 30,
          "conditions": "",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Output current",
          "symbol": "IOUT",
          "kind": "recommended_operating",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Supply current",
          "symbol": "Icc",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 2.5,
          "max": 3.2,
          "conditions": "3-wire",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Port low output voltage",
          "symbol": "Vol",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.13,
          "max": 0.4,
          "conditions": "IO = 20 mA",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Port low output voltage",
          "symbol": "Vol",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.5,
          "conditions": "IO = 25 mA",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Output refresh period",
          "symbol": "tsamp",
          "kind": "timing",
          "unit": "µs",
          "min": 1.6,
          "typ": 2,
          "max": 2.66,
          "conditions": "",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Enable time of output after settling of Vcc",
          "symbol": "ten",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "VCC = 12V",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage (abs max)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 34,
          "conditions": "t < 96 h, with series resistor RV > 100",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage (abs max)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 36,
          "conditions": "t < 5 min, with series resistor RV > 100",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage (abs max)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 40,
          "conditions": "t < 5 x 400 ms, with series resistor RV > 100",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Output voltage (abs max)",
          "symbol": "VOUT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 34,
          "conditions": "t < 96 h, with series resistor RL > 100",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Output voltage (abs max)",
          "symbol": "VOUT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 36,
          "conditions": "t < 5 min, with series resistor RL > 100",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Output voltage (abs max)",
          "symbol": "VOUT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 40,
          "conditions": "t < 5 x 400 ms, with series resistor RL > 100",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Ambient temperature range (abs max)",
          "symbol": "TA",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 170,
          "conditions": "t < 96 h, no cumulative stress",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Maximum latch-up free current at any pin",
          "symbol": "Ilatch",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -100,
          "typ": null,
          "max": 100,
          "conditions": "AEC Q100-004, class 1",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Human body model ESD",
          "symbol": "VHBM",
          "kind": "absolute_maximum",
          "unit": "kV",
          "min": 12,
          "typ": null,
          "max": null,
          "conditions": "AEC Q100-002",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Magnetic on point",
          "symbol": "BON",
          "kind": "electrical",
          "unit": "mT",
          "min": null,
          "typ": 27,
          "max": null,
          "conditions": "TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Magnetic off point",
          "symbol": "BOFF",
          "kind": "electrical",
          "unit": "mT",
          "min": null,
          "typ": 23,
          "max": null,
          "conditions": "TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Hysteresis",
          "symbol": "BHYS",
          "kind": "electrical",
          "unit": "mT",
          "min": null,
          "typ": 4,
          "max": null,
          "conditions": "TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Temp. coeff. of magnetic thresholds",
          "symbol": "TC",
          "kind": "temperature_coefficient",
          "unit": "ppm/K",
          "min": null,
          "typ": 300,
          "max": null,
          "conditions": "JSM507 unipolar",
          "source_page": 13,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "jsm507"
  ],
  "discovery_pitch": "JSM507 (JSMSEMI) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "jsm507.kicad_sym",
    "jsm507.kicad_mod",
    "jsm507.glb",
    "jsm507.step",
    "jsm507.lbr",
    "docs/hero.png",
    "docs/jsm507-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "jsm507-hero.glb",
    "jsm507-hero.overlay.json",
    "jsm507-etched.glb",
    "jsm507-etched.step"
  ],
  "visibility": "public",
  "description": "JSMSEMI Magnetic Sensors, TO-92S. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}