main
Ray
Publish 0.1.0
18f891f
JSM507
JSMSEMI · Magnetic Sensors · TO-92S
JSM507 from JSMSEMI, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply pin, operating range 2.7 V to 30 V with built-in reverse-voltage protection. |
| 2 | GND | power_in | Ground reference for all voltages. |
| 3 | Vout | output | Open-drain output, short-circuit protected, goes tri-state on overtemperature or undervoltage; rated up to 30 V and 25 mA recommended operating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | TO-92S |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | 30 | V | 3-wire | 12 | |
| Ambient temperature range | TA | -40 | 150 | °C | 12 | ||
| Output voltage | VOUT | 30 | V | 12 | |||
| Output current | IOUT | 25 | mA | 12 | |||
| Supply current | Icc | 2.5 | 3.2 | mA | 3-wire | 12 | |
| Port low output voltage | Vol | 0.13 | 0.4 | V | IO = 20 mA | 12 | |
| Port low output voltage | Vol | 0.5 | V | IO = 25 mA | 12 | ||
| Output refresh period | tsamp | 1.6 | 2 | 2.66 | µs | 12 | |
| Enable time of output after settling of Vcc | ten | 50 | µs | VCC = 12V | 12 | ||
| Supply voltage (abs max) | VCC | 34 | V | t < 96 h, with series resistor RV > 100 | 11 | ||
| Supply voltage (abs max) | VCC | 36 | V | t < 5 min, with series resistor RV > 100 | 11 | ||
| Supply voltage (abs max) | VCC | 40 | V | t < 5 x 400 ms, with series resistor RV > 100 | 11 | ||
| Output voltage (abs max) | VOUT | 34 | V | t < 96 h, with series resistor RL > 100 | 11 | ||
| Output voltage (abs max) | VOUT | 36 | V | t < 5 min, with series resistor RL > 100 | 11 | ||
| Output voltage (abs max) | VOUT | 40 | V | t < 5 x 400 ms, with series resistor RL > 100 | 11 | ||
| Ambient temperature range (abs max) | TA | 170 | °C | t < 96 h, no cumulative stress | 11 | ||
| Maximum latch-up free current at any pin | Ilatch | -100 | 100 | mA | AEC Q100-004, class 1 | 11 | |
| Human body model ESD | VHBM | 12 | kV | AEC Q100-002 | 11 | ||
| Magnetic on point | BON | 27 | mT | TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C | 13 | ||
| Magnetic off point | BOFF | 23 | mT | TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C | 13 | ||
| Hysteresis | BHYS | 4 | mT | TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C | 13 | ||
| Temp. coeff. of magnetic thresholds | TC | 300 | ppm/K | JSM507 unipolar | 13 |
CAD (KiCad official)
- Symbol:
JSM507 - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files:
jsm507-etched.step/jsm507-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jsm507.step/jsm507.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (15 pp, sha256
41bf77586cdc4842, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# JSM507
**JSMSEMI** · Magnetic Sensors · TO-92S
JSM507 from JSMSEMI, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply pin, operating range 2.7 V to 30 V with built-in reverse-voltage protection. |
| 2 | GND | power_in | Ground reference for all voltages. |
| 3 | Vout | output | Open-drain output, short-circuit protected, goes tri-state on overtemperature or undervoltage; rated up to 30 V and 25 mA recommended operating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | TO-92S |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | | 30 | V | 3-wire | 12 |
| Ambient temperature range | TA | -40 | | 150 | °C | | 12 |
| Output voltage | VOUT | | | 30 | V | | 12 |
| Output current | IOUT | | | 25 | mA | | 12 |
| Supply current | Icc | | 2.5 | 3.2 | mA | 3-wire | 12 |
| Port low output voltage | Vol | | 0.13 | 0.4 | V | IO = 20 mA | 12 |
| Port low output voltage | Vol | | | 0.5 | V | IO = 25 mA | 12 |
| Output refresh period | tsamp | 1.6 | 2 | 2.66 | µs | | 12 |
| Enable time of output after settling of Vcc | ten | | | 50 | µs | VCC = 12V | 12 |
| Supply voltage (abs max) | VCC | | | 34 | V | t < 96 h, with series resistor RV > 100 | 11 |
| Supply voltage (abs max) | VCC | | | 36 | V | t < 5 min, with series resistor RV > 100 | 11 |
| Supply voltage (abs max) | VCC | | | 40 | V | t < 5 x 400 ms, with series resistor RV > 100 | 11 |
| Output voltage (abs max) | VOUT | | | 34 | V | t < 96 h, with series resistor RL > 100 | 11 |
| Output voltage (abs max) | VOUT | | | 36 | V | t < 5 min, with series resistor RL > 100 | 11 |
| Output voltage (abs max) | VOUT | | | 40 | V | t < 5 x 400 ms, with series resistor RL > 100 | 11 |
| Ambient temperature range (abs max) | TA | | | 170 | °C | t < 96 h, no cumulative stress | 11 |
| Maximum latch-up free current at any pin | Ilatch | -100 | | 100 | mA | AEC Q100-004, class 1 | 11 |
| Human body model ESD | VHBM | 12 | | | kV | AEC Q100-002 | 11 |
| Magnetic on point | BON | | 27 | | mT | TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C | 13 |
| Magnetic off point | BOFF | | 23 | | mT | TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C | 13 |
| Hysteresis | BHYS | | 4 | | mT | TA = -40 °C to 150 °C, Vcc = 3.0 V to 30 V; typical at TA = 25 °C | 13 |
| Temp. coeff. of magnetic thresholds | TC | | 300 | | ppm/K | JSM507 unipolar | 13 |
## CAD (KiCad official)
- Symbol: `JSM507`
- Footprint: `Package_TO_SOT_THT:TO-92_Inline`
- 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files: `jsm507-etched.step` / `jsm507-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `jsm507.step` / `jsm507.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [JSMSEMI datasheet](docs/jsm507-datasheet.pdf) (15 pp, sha256 `41bf77586cdc4842`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/jsm507-datasheet.pdf)