Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

JSM504

JSMSEMI · Magnetic Sensors · SOT-23

JSM504 from JSMSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply pin for the 3-wire device, specified for 2.7 V to 30 V with reverse-voltage protection at the Vcc pin.
2 GND power_in Ground reference pin; all voltages in the datasheet are referenced to GND.
3 Vout output Open-drain output, rated up to 30 V and 25 mA, short-circuit protected and forced to high impedance on overtemperature or undervoltage.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOT-23
Category Sensors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 20 V t < 1000 h 11
Supply voltage VCC 34 V t < 96 h 11
Supply voltage VCC 36 V t < 5 min 11
Supply voltage VCC 40 V t < 5 x 400 ms; with series resistor RV > 100 11
Output voltage VOUT 0.5 V t < 1000 h 11
Output voltage VOUT 34 V t < 96 h 11
Output voltage VOUT 36 V t < 5 min 11
Output voltage VOUT 40 V t < 5 x 400 ms; with series resistor RL > 100 11
Output current IO 65 mA 11
Reverse output current IOR 50 mA 11
Ambient temperature range TA 40 170 °C t < 96 h 11
Maximum latch-up free current at any pin (AEC Q100-004, class 1) Ilatch 100 100 mA 11
Human body model ESD (AEC Q100-002) VHBM 12 kV 11
Supply voltage VCC 2.7 30 V 3-wire 12
Ambient temperature range TA 40 150 °C 12
Output voltage VOUT 30 V 12
Output current IOUT 25 mA 12
Supply current Icc 2.5 3.2 mA 3-wire 12
Reverse current IccR 1 mA for Vcc = -18 V 12
Port low output voltage Vol 0.13 0.4 V IO = 20 mA 12
Port low output voltage Vol 0.5 V IO = 25 mA 12
Output fall time tf 1 µs Vcc = 12V; RL = 820; CL = 20 pF 12
Output rise time tr 1 µs 12
Effective noise of magnetic switching points Bnoise 0.1 mT For square wave signal with 1 kHz 12
Output jitter tj 0.5 µs For square wave signal with 1 kHz 12
Delay time td 16 µs 12
Output refresh period tsamp 1.6 2 2.66 µs 12
Enable time of output after settling of Vcc ten 50 µs VCC = 12V; B > Bon + 2 mT or B < Boff - 2 mT 12

CAD (KiCad official)

  • Symbol: JSM504
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: jsm504-etched.step / jsm504-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); jsm504.step / jsm504.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (15 pp, sha256 f2850b9081a693b5, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF