component
JSM503
Public Made by Adomby adom
JSMSEMI Hall Switches, TO-92S. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownJSM503
JSMSEMI · Hall Switches · TO-92S
JSM503 from JSMSEMI, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage pin, operating from 2.7 V to 30 V with built-in reverse-voltage protection, and an absolute maximum of 20 V for t < 1000 h. |
| 2 | GND | power_in | Ground reference; all voltages in the datasheet are referenced to GND. |
| 3 | Vout | output | Open-drain output of the 3-wire device, driven low by a magnetic south pole on the branded side, with a recommended maximum of 30 V and 25 mA (absolute maximum 65 mA). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | TO-92S |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 20 | V | t < 1000 h | 11 | ||
| Supply voltage | VCC | 34 | V | t < 96 h | 11 | ||
| Supply voltage | VCC | 36 | V | t < 5 min | 11 | ||
| Supply voltage | VCC | 40 | V | t < 5 x 400 ms; with series resistor RV > 100 | 11 | ||
| Output voltage | VOUT | -0.5 | V | t < 1000 h | 11 | ||
| Output voltage | VOUT | 34 | V | t < 96 h | 11 | ||
| Output voltage | VOUT | 36 | V | t < 5 min | 11 | ||
| Output voltage | VOUT | 40 | V | t < 5 x 400 ms; with series resistor RL > 100 | 11 | ||
| Output current | IO | 65 | mA | 11 | |||
| Reverse output current | IOR | 50 | mA | 11 | |||
| Ambient temperature range | TA | -40 | 170 | °C | t < 96 h | 11 | |
| Maximum latch-up free current at any pin | Ilatch | -100 | 100 | mA | AEC Q100-004, class 1 | 11 | |
| Human body model ESD | VHBM | 12 | kV | AEC Q100-002 | 11 | ||
| Supply voltage | VCC | 2.7 | 30 | V | 3-wire | 12 | |
| Ambient temperature range | TA | -40 | 150 | °C | 12 | ||
| Output voltage | VOUT | 30 | V | 12 | |||
| Output current | IOUT | 25 | mA | 12 | |||
| Supply current | Icc | 2.5 | 3.2 | mA | 3-wire | 12 | |
| Reverse current | IccR | 1 | mA | for Vcc = -18 V | 12 | ||
| Port low output voltage | Vol | 0.13 | 0.4 | V | IO = 20 mA | 12 | |
| Port low output voltage | Vol | 0.5 | V | IO = 25 mA | 12 | ||
| Output fall time | tf | 1 | µs | Vcc = 12V; RL = 820 ; CL = 20 pF | 12 | ||
| Output rise time | tr | 1 | µs | 12 | |||
| Effective noise of magnetic switching points | Bnoise | 0.1 | mT | For square wave signal with 1 kHz | 12 | ||
| Output jitter | tj | 0.5 | µs | For square wave signal with 1 kHz | 12 | ||
| Delay time | td | 16 | µs | 12 | |||
| Output refresh period | tsamp | 1.6 | 2 | 2.66 | µs | 12 | |
| Enable time of output after settling of Vcc | ten | 50 | µs | VCC = 12V | 12 | ||
| Operate point (on point) | BON | 5.5 | mT | TA = -40 °C to 150 °C, VCC = 3.0 V to 30 V; typical at TA = 25 °C | 13 | ||
| Release point (off point) | BOFF | 3.5 | mT | TA = -40 °C to 150 °C, VCC = 3.0 V to 30 V; typical at TA = 25 °C | 13 | ||
| Hysteresis | BHYS | 2 | mT | TA = -40 °C to 150 °C, VCC = 3.0 V to 30 V; typical at TA = 25 °C | 13 | ||
| Temp. coeff. of magnetic thresh. | TC | 1000 | ppm/K | TA = -40 °C to 150 °C, VCC = 3.0 V to 30 V; typical at TA = 25 °C | 13 |
CAD (KiCad official)
- Symbol:
JSM503 - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files:
jsm503-etched.step/jsm503-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jsm503.step/jsm503.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (15 pp, sha256
605f4b6ca0dfb404, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).