JSM451

{
 "schema": "adom.pads/1",
 "slug": "jsm451",
 "footprint": "SOT-23",
 "generated_from": {
  "footprint": "SOT-23@sha256:0d88c86c1b6d8c1a",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -0.9375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23@sha256:0d88c86c1b6d8c1a"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "VSUP",
   "type": "power_in",
   "description": "Supply voltage input, 3.8 V to 40 V (absolute max 60 V). Typical supply current 3.5 mA (7 mA max). Decouple with a local ceramic capacitor; add series R (100 Ω) and CP (4.7 nF) near the sensor in noisy supplies.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference return for the device.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.9375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VOUT",
   "type": "output",
   "description": "Open-collector Hall switch output; requires external pull-up resistor (typ. RL = 4.7 kΩ). Sinks up to 40 mA with Vsat <= 0.4 V at 20 mA. Output goes LOW when |B| > Bop (+/-80 Gauss) and HIGH when |B| < Brp (+/-50 Gauss). Output voltage rating -0.5 V to 60 V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}