Generated by adom_assets · KiCad file format 20240108
JS203011CQN
C&K · Slide Switches · THT
JS203011CQN from C&K, in a THT. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Throw contact, pole 1 |
| 2 | 2 | passive | Throw contact, pole 1 |
| 3 | 3 | passive | Common, pole 1 (circuit diagram 'C') |
| 4 | 4 | passive | Throw contact, pole 1 |
| 5 | 5 | passive | Throw contact, pole 2 |
| 6 | 6 | passive | Throw contact, pole 2 |
| 7 | 7 | passive | Common, pole 2 (circuit diagram 'C') |
| 8 | 8 | passive | Throw contact, pole 2 |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | C&K |
| Package | THT |
| Category | Switches |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact Resistance | 70 | mΩ | 1 | ||||
| Insulation Resistance | 100 | MΩ | @ 500V | 1 | |||
| Dielectric Strength | 500 | VAC | @ sea level | 1 | |||
| Contact Rating | 0.3 | A | @ 6VDC | 1 | |||
| Contact Rating | 0.1 | A | @ 30VDC | 1 | |||
| Electrical Life | 5000 | cycles | make-and-break cycles | 1 | |||
| Operating Temperature | -40 | 85 | ºC | 1 | |||
| Storage Temperature | -40 | 85 | ºC | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | nylon | Housing 4/6 nylon, black | 1 | |
| contacts | Copper alloy | gold | Contacts Copper alloy, silver or gold plated | 1 |
CAD (Adom-generated)
- Symbol:
JS203011CQN - Footprint:
Adom_Gen:C_K_JS203011_8918fa - 3D model: generated to fit the land (STEP)
- 3D model files:
js203011cqn-etched.step/js203011cqn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);js203011cqn.step/js203011cqn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: C&K datasheet (15 pp, sha256
0f35cdf47a1f93da, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: C&K (Littelfuse) JS Series datasheet p.3 'PC Thru-hole, JS203011CQN DP3T': 'PCB Mount - Hole Layout' 8X 0.9 holes, columns 2.0 / 4.0 / 2.0 apart (x -4, -2, +2, +4) in two rows 3.3 apart; body 13.0 x 3.6, terminals 0.6 wide, 12.4 between the outer terminals, body 3.5 tall with a 2.0 actuator; 'Terminal No. 1' at the left end. No extra mounting holes (8 pads; the 10-pad reading was wrong). Copper not printed: 1.5 mm pads (derived) on the 0.9 holes.