component

JRC4558

Public Made by Adom

by adom

MSKSEMI Operational Amplifier, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpjrc4558
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs jrc4558: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
jrc4558-etched.fit.json jrc4558: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
jrc4558-etched.glb jrc4558: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
jrc4558-etched.step jrc4558: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
jrc4558.glb Publish 0.1.0 · Ray 1mo ago
jrc4558.kicad_mod Publish 0.1.0 · Ray 1mo ago
jrc4558.kicad_sym Publish 0.1.0 · Ray 1mo ago
jrc4558.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 8 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
jrc4558.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json jrc4558: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 1d ago
README.md jrc4558: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 19d ago

JRC4558

MSKSEMI · Operational Amplifier · SOP-8

JRC4558 from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Amplifier A output. Op-amp output with short-circuit protection; can source/sink up to 5 mA at typical VOH=13.4 V (VCC+=15 V, Iout=-5 mA).
2 IN1- input Amplifier A inverting input. Typical input bias current 50 nA, offset current 10 nA. Common-mode range from VCC- to (VCC+ - 1.5 V).
3 IN1+ input Amplifier A non-inverting input. Typical input bias current 50 nA. Common-mode range from VCC- to (VCC+ - 1.5 V).
4 VCC- power_in Negative supply / ground. Connect to GND for single-supply operation (VCC+ = 3 V to 30 V) or to -15 V for dual-supply operation (±15 V). Absolute maximum single-supply 36 V, dual-supply ±18 V.
5 IN2+ input Amplifier B non-inverting input. Typical input bias current 50 nA. Common-mode range from VCC- to (VCC+ - 1.5 V).
6 IN2- input Amplifier B inverting input. Typical input bias current 50 nA, offset current 10 nA. Common-mode range from VCC- to (VCC+ - 1.5 V).
7 OUT2 output Amplifier B output. Op-amp output with short-circuit protection; can source/sink up to 5 mA at typical VOH=13.4 V (VCC+=15 V, Iout=-5 mA).
8 VCC+ power_in Positive supply. Single-supply range 3 V to 30 V (VCC- = GND) or dual-supply +15 V. Typical quiescent current 0.5 mA at VCC+=5 V, 0.8 mA at VCC+=30 V. Absolute maximum single-supply 36 V.

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package SOP-8
Category Op-amp/Cmp
Pins 8

CAD (KiCad official)

  • Symbol: JRC4558
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: jrc4558-etched.step / jrc4558-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); jrc4558.step / jrc4558.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
jrc4558.step 122 KB You want the bare part, or you mark your own boards.
jrc4558-etched.step 1.8 MB You want the part with JRC4558 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 446 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (7 pp, sha256 e3e4998fc56208de, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF