component
JK-mSMD160
Public Made by Adomby adom
Jinrui Electronic Materials Co Resettable Fuses, 1812. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownJK-mSMD160
Jinrui Electronic Materials Co · Resettable Fuses · 1812
JK-mSMD160 from Jinrui Electronic Materials Co, in a 1812. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jinrui Electronic Materials Co |
| Package | 1812 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum operating voltage (rated voltage) | Umax | 8 | Vdc | JK-mSMD160 maximum operating voltage | 4 | ||
| Maximum fault current | Imax | 100 | A | At Vmax (8.0 Vdc) | 4 | ||
| Hold current | Ihold | 1.6 | A | 25°C still air; maximum current that does not trip | 4 | ||
| Trip current | Itrip | 2.8 | A | 25°C still air; minimum current that always trips | 4 | ||
| Time to trip | 1 | Sec | At 8.0 A, Vmax, 25°C | 4 | |||
| Minimum resistance prior to tripping | Rimin | 0.03 | Ω | 25°C, in still air, before tripping | 4 | ||
| Maximum resistance one hour post reflow | R1max | 0.13 | Ω | Measured one hour post reflow | 4 | ||
| Resistance change after passive aging | ΔR/R | -10 | 10 | % | 85°C, 1000 hours (series test; printed ±10%) | 5 | |
| Resistance change after humidity aging | ΔR/R | -5 | 5 | % | 85°C/85%RH, 1000 hours (series test; printed ±5%) | 5 | |
| Resistance change after thermal shock | ΔR/R | -30 | % | MIL-STD-202 Method 107G, +85°C/-40°C, 20 cycles; printed as typical | 5 | ||
| Operating temperature | T | -40 | 85 | °C | Operating ambient temperature range | 1 | |
| Maximum hold current derating at ambient | IH | 2.45 | A | Maximum ambient operating temperature -40°C | 3 | ||
| Maximum hold current derating at ambient | IH | 2.15 | A | Maximum ambient operating temperature -20°C | 3 | ||
| Maximum hold current derating at ambient | IH | 1.89 | A | Maximum ambient operating temperature 0°C | 3 | ||
| Maximum hold current derating at ambient | IH | 1.6 | A | Maximum ambient operating temperature 25°C | 3 | ||
| Maximum hold current derating at ambient | IH | 1.34 | A | Maximum ambient operating temperature 40°C | 3 | ||
| Maximum hold current derating at ambient | IH | 1.25 | A | Maximum ambient operating temperature 50°C | 3 | ||
| Maximum hold current derating at ambient | IH | 1.15 | A | Maximum ambient operating temperature 60°C | 3 | ||
| Maximum hold current derating at ambient | IH | 0.96 | A | Maximum ambient operating temperature 70°C | 3 | ||
| Maximum hold current derating at ambient | IH | 0.79 | A | Maximum ambient operating temperature 85°C | 3 |
CAD (KiCad official)
- Symbol:
JK-mSMD160 - Footprint:
Fuse:Fuse_1812_4532Metric - 3D model: 1812, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal 1806 height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
jk-msmd160-etched.step/jk-msmd160-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jk-msmd160.step/jk-msmd160.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jinrui Electronic Materials Co datasheet (8 pp, sha256
8d950f09d4bc30e4, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).