main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs jfe150dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers jfe150dckr: viewers · Ray
jfe150dckr-etched.fit.json jfe150dckr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
jfe150dckr-etched.glb jfe150dckr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
jfe150dckr-etched.step jfe150dckr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
jfe150dckr-hero.glb jfe150dckr: hero from the plain model · Ray
jfe150dckr-hero.overlay.json jfe150dckr: hero from the plain model · Ray
jfe150dckr.glb Publish 0.1.0 · Ray
jfe150dckr.kicad_mod Publish 0.1.0 · Ray
jfe150dckr.kicad_sym Publish 0.1.0 · Ray
jfe150dckr.lbr Publish 0.1.0 · Ray
jfe150dckr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md jfe150dckr: specified limits as data (metadata.characteristics, 47 rows from the datasheet) · Ray

JFE150DCKR

Texas Instruments · FET Input Amplifiers · SC70-5

JFE150DCKR from Texas Instruments, in a SC70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCH passive Positive diode clamp voltage node with 40 V maximum rating; float if unused.
2 VCL passive Negative diode clamp voltage node with -40 V minimum rating; float if unused.
3 G input Gate input with recommended VGS 0 to -1.2 V, maximum gate current ±10 pA, and gate-to-source breakdown voltage -40 V.
4 S output Source terminal of N-channel JFET; drain current return path set by source resistor and threshold voltage.
5 D output Drain output terminal with ±40 V maximum VDS, 40 V drain-to-source breakdown voltage, and 35 mA maximum saturation current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC70-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Drain-to-source voltage VDS -40 40 V 4
Gate-to-source, gate-to-drain voltage VGS, VGD -40 0.9 V 4
Voltage between VCH to D, G, or S VVCH 40 V 4
Voltage between VCL to D, G, or S VVCL -40 V 4
Clamp diode current IVCL, IVCH 20 mA DC 4
Clamp diode current IVCL, IVCH 200 mA 50-ms pulse 4
Drain-to-source current IDS -50 50 mA 4
Gate-to-source, gate-to-drain current IGS, IGD -20 20 mA 4
Ambient temperature TA -55 150 °C 4
Junction temperature TJ -55 150 °C 4
Storage temperature Tstg -55 175 °C 4
Gate-to-source voltage VGS -1.2 0 V 4
Specified temperature TA -40 125 °C 4
Input gate current IG -10 0.2 10 pA VDS = 2 V, VGS = –0.7 V, VVCH = 5 V, VVCL = –5 V 5
Input gate current IG -2000 2000 pA TA = –40°C to +85°C 5
Input gate current IG -10000 10000 pA TA = –40°C to +125°C 5
Gate-to-source cutoff voltage VGSC -1.5 -1.2 -0.9 V VDS = 10 V, IDS = 0.1 µA 5
Gate-to-source voltage VGS -1.3 -0.7 V IDS = 100 µA 5
Gate-to-source voltage VGS -1.1 -0.5 V IDS = 2 mA 5
Drain-to-source saturation current IDSS 24 35 46 mA VDS = 10 V, VGS = 0 V 5
Drain-to-source saturation current IDSS 22 57 mA TA = –40°C to +125°C 5
Full conduction transconductance GFS 55 68 80 mS VDS = 10 V, VGS = 0 V 5
Input-referred voltage noise density en 3 nV/√Hz IDS = 100 µA, VDS = 5 V, f = 10 Hz 5
Input-referred voltage noise density en 2 nV/√Hz IDS = 100 µA, VDS = 5 V, f = 1 kHz 5
Input-referred voltage noise density en 1.6 nV/√Hz IDS = 2 mA, VDS = 5 V, f = 10 Hz 5
Input-referred voltage noise density en 0.9 nV/√Hz IDS = 2 mA, VDS = 5 V, f = 1 kHz 5
Input-referred voltage noise density en 1.8 nV/√Hz IDS = 5 mA, VDS = 5 V, f = 10 Hz 5
Input-referred voltage noise density en 0.8 nV/√Hz IDS = 5 mA, VDS = 5 V, f = 1 kHz 5
Input-referred voltage noise (peak-to-peak) 0.19 µVPP f = 0.1 Hz to 10 Hz, VDS = 5 V, IDS = 100 µA 5
Input-referred voltage noise (peak-to-peak) 0.09 µVPP f = 0.1 Hz to 10 Hz, VDS = 5 V, IDS = 2 mA 5
Input-referred voltage noise (peak-to-peak) 0.13 µVPP f = 0.1 Hz to 10 Hz, VDS = 5 V, IDS = 5 mA 5
Input current noise ei 1.8 fA/√Hz f = 1 kHz, VDS = 5 V 5
Input gate current IG 0.2 pA VDS = 0 V, VGS = –30 V 5
Gate-to-source breakdown voltage VGSS -40 V VDS = 0 V, /IG/ < 100 µA 5
Gate input resistance RIN 1 TΩ VGS = –5 V to 0 V, VDS = 0 V 5
Input capacitance CISS 30 pF VDS = 0 V 5
Input capacitance CISS 24 pF VDS = 5 V 5
Reverse transfer capacitance CRSS 7 pF VDS = 0 V 5
Transconductance gm 3 mS IDS = 100 µA 5
Transconductance gm 18 mS IDS = 2 mA 5
Drain-to-source breakdown voltage VDSS 40 V /IDS/ < 100 µA, VGS = –2 V 5
Output capacitance COSS 8 pF VDS = 5 V 5
Junction-to-ambient thermal resistance RθJA 197.1 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 93.7 °C/W 4
Junction-to-board thermal resistance RθJB 44.8 °C/W 4
Junction-to-top characterization parameter ψJT 16.7 °C/W 4
Junction-to-board characterization parameter ψJB 44.6 °C/W 4

CAD (KiCad official)

  • Symbol: JFE150DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC70-5 (KiCad packages3D, STEP)
  • 3D model files: jfe150dckr-etched.step / jfe150dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); jfe150dckr.step / jfe150dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 925d58a8f0cf7db3, retrieved 2026-09-24, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF