component
IXDD609PI
Public Made by Adomby adom
Littelfuse IXYS Gate Drivers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownIXDD609PI
Littelfuse IXYS · Gate Drivers · DIP-8
IXDD609PI from Littelfuse IXYS, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage pin that powers the device, recommended 4.5V to 35V (absolute maximum 40V). |
| 2 | IN | input | Logic input, CMOS compatible, withstands negative swing down to -5V and up to VCC+0.3V. |
| 3 | EN | input | Output enable: drive low (below 1/3 VCC) to disable the output and force it to a high-impedance state, high (above 2/3 VCC) or open enables it, with a typical 200k internal pull-up. |
| 4 | GND | power_in | Ground, common ground reference for the device. |
| 5 | GND | power_in | Ground, common ground reference for the device. |
| 6 | OUT | output | Output that sources or sinks up to 9A peak current to turn on or off a discrete MOSFET or IGBT, high-impedance when EN is low. |
| 7 | OUT | output | Output that sources or sinks up to 9A peak current to turn on or off a discrete MOSFET or IGBT, high-impedance when EN is low. |
| 8 | VCC | power_in | Supply voltage pin that powers the device, recommended 4.5V to 35V (absolute maximum 40V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse IXYS |
| Package | DIP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage, High | VIH | 3 | V | TA = 25°C; 4.5V < VCC < 18V | 4 | ||
| Input Voltage, Low | VIL | -0.8 | V | TA = 25°C; 4.5V < VCC < 18V | 4 | ||
| Input Current | IIN | -10 | 10 | µA | TA = 25°C; 0V < VIN < VCC | 4 | |
| Output Voltage, Low | VOL | 0.025 | V | TA = 25°C | 4 | ||
| Output Resistance, High State | ROH | 0.6 | 1 | Ω | TA = 25°C; VCC=18V, IOUT=-100mA | 4 | |
| Output Resistance, Low State | ROL | 0.4 | 0.8 | Ω | TA = 25°C; VCC=18V, IOUT=100mA | 4 | |
| Output Current, Continuous | IDC | -2 | 2 | A | TA = 25°C; Limited by package power dissipation | 4 | |
| Rise Time | tr | 22 | 35 | ns | TA = 25°C; VCC=18V, CLOAD=10nF | 4 | |
| Fall Time | tf | 15 | 25 | ns | TA = 25°C; VCC=18V, CLOAD=10nF | 4 | |
| On-Time Propagation Delay | tondly | 40 | 60 | ns | TA = 25°C; VCC=18V, CLOAD=10nF | 4 | |
| Off-Time Propagation Delay | toffdly | 42 | 60 | ns | TA = 25°C; VCC=18V, CLOAD=10nF | 4 | |
| Enable to Output-High Delay Time (IXDD609 Only) | tENOH | 25 | 60 | ns | TA = 25°C; VCC=18V | 4 | |
| Disable to High Impedance State Delay Time (IXDD609 Only) | tDOLD | 35 | 60 | ns | TA = 25°C; VCC=18V | 4 | |
| Power Supply Current | ICC | 1 | 2 | mA | TA = 25°C; VCC=18V, VIN=3.5V | 4 | |
| Power Supply Current | ICC | 10 | µA | TA = 25°C; VCC=18V, VIN=0V (typical printed as <1) | 4 | ||
| Input Voltage, High | VIH | 3.3 | V | TA = -40°C to +125°C; 4.5V < VCC < 18V | 4 | ||
| Input Voltage, Low | VIL | -0.65 | V | TA = -40°C to +125°C; 4.5V < VCC < 18V | 4 | ||
| Output Resistance, High State | ROH | 2 | Ω | TA = -40°C to +125°C; VCC=18V, IOUT=-100mA | 4 | ||
| Output Resistance, Low State | ROL | 1.5 | Ω | TA = -40°C to +125°C; VCC=18V, IOUT=100mA | 4 | ||
| Output Current, Continuous | IDC | -1 | 1 | A | TA = -40°C to +125°C; Limited by package power dissipation | 4 | |
| Rise Time | tr | 40 | ns | TA = -40°C to +125°C; VCC=18V, CLOAD=10nF | 4 | ||
| Fall Time | tf | 30 | ns | TA = -40°C to +125°C; VCC=18V, CLOAD=10nF | 4 | ||
| On-Time Propagation Delay | tondly | 75 | ns | TA = -40°C to +125°C; VCC=18V, CLOAD=10nF | 4 | ||
| Off-Time Propagation Delay | toffdly | 75 | ns | TA = -40°C to +125°C; VCC=18V, CLOAD=10nF | 4 | ||
| Enable to Output-High Delay Time | tENOH | 75 | ns | TA = -40°C to +125°C; IXDD609 only, VCC=18V | 4 | ||
| Disable to High Impedance State Delay Time | tDOLD | 75 | ns | TA = -40°C to +125°C; IXDD609 only, VCC=18V | 4 | ||
| Power Supply Current | ICC | 2.5 | mA | TA = -40°C to +125°C; VCC=18V, VIN=3.5V | 4 | ||
| Power Supply Current | ICC | 150 | µA | TA = -40°C to +125°C; VCC=18V, VIN=0V | 4 | ||
| Supply Voltage | VCC | -0.3 | 40 | V | 3 | ||
| Input Voltage | VIN, VEN | -5 | V | 3 | |||
| Output Current | IOUT | -9 | 9 | A | 3 | ||
| Junction Temperature | TJ | -55 | 150 | °C | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Supply Voltage | VCC | 4.5 | 35 | V | 3 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Thermal Impedance, Junction-to-Ambient, PI (8-Pin DIP) | JA | 125 | °C/W | PI (8-Pin DIP) package | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Circuits Division classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of prod | 10 |
CAD (KiCad official)
- Symbol:
IXDD609PI - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
ixdd609pi-etched.step/ixdd609pi-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ixdd609pi.step/ixdd609pi.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Littelfuse IXYS datasheet (14 pp, sha256
f7a2276a0481ea78, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).