IXDD604PI

{
  "slug": "ixdd604pi",
  "version": "0.1.0",
  "type": "component",
  "description": "Littelfuse IXYS Gate Drivers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "ixdd604pi",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ixdd604pi.kicad_sym",
    "ixdd604pi.kicad_mod",
    "ixdd604pi.glb",
    "ixdd604pi.step",
    "ixdd604pi.lbr",
    "docs/hero.png",
    "docs/ixdd604pi-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ixdd604pi-hero.glb",
    "ixdd604pi-hero.overlay.json",
    "ixdd604pi-etched.glb"
  ],
  "component": {
    "mpn": "IXDD604PI",
    "manufacturer": "Littelfuse IXYS",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918105670635520",
    "parts": {
      "symbol": "ixdd604pi.kicad_sym",
      "footprint": "ixdd604pi.kicad_mod",
      "model_3d": "ixdd604pi-hero.glb",
      "model_3d_plain": "ixdd604pi-etched.glb",
      "model_3d_step": "ixdd604pi-etched.step",
      "model_3d_step_plain": "ixdd604pi.step",
      "lbr": "ixdd604pi.lbr"
    },
    "distributor_links": {
      "lcsc": "C93509",
      "digikey": "212-IXDD604PI-ND",
      "mouser": "849-IXDD604PI"
    },
    "distributor_check": {
      "checked_at": "2026-10-16T20:40:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "212-IXDD604PI-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "849-IXDD604PI",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ENA",
        "type": "input",
        "description": "Channel A enable input; drive low to disable Channel A and force its output to a high-impedance state (internal 200kΩ pull-up to VCC, so open = enabled)."
      },
      {
        "number": "2",
        "name": "INA",
        "type": "input",
        "description": "Channel A logic input (VIH 3.0V min, VIL 0.8V max at 25°C for 4.5V<VCC<18V; withstands down to -5V)."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground, the common ground reference for the device."
      },
      {
        "number": "4",
        "name": "INB",
        "type": "input",
        "description": "Channel B logic input (VIH 3.0V min, VIL 0.8V max at 25°C for 4.5V<VCC<18V; withstands down to -5V)."
      },
      {
        "number": "5",
        "name": "OUTB",
        "type": "tri_state",
        "description": "Channel B output that sources or sinks up to 4A to turn a discrete MOSFET or IGBT on or off, and goes high-impedance when ENB is low."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage powering the device, recommended 4.5V to 35V (absolute maximum 40V)."
      },
      {
        "number": "7",
        "name": "OUTA",
        "type": "tri_state",
        "description": "Channel A output that sources or sinks up to 4A to turn a discrete MOSFET or IGBT on or off, and goes high-impedance when ENA is low."
      },
      {
        "number": "8",
        "name": "ENB",
        "type": "input",
        "description": "Channel B enable input; drive low to disable Channel B and force its output to a high-impedance state (internal 200kΩ pull-up to VCC, so open = enabled)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The page 3 pin configuration text lists the labels (ENA, INA, GND, INB, ENB, OUTA, VCC, OUTB) and th; The page 3 Pin Definitions text for ENB says 'Drive pin low to disable Channel A and force Channel A; The datasheet gives ENA/ENB only for the IXDD604 (enable-capable) variant, which is the MPN requeste"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0768,
        "at": "2026-10-16T20:40:25"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918105670635520",
        "pages": 14,
        "sha256": "f253fa2390726f1d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ixdd604pi.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ixdd604pi-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c83d65ca3e7c3ca74fac9d50034c6221688902e6f1e44373413dfa6e853c01a3",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}