Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
IXBX75N170
Littelfuse/IXYS · IGBTs · TO-247-3
IXBX75N170 from Littelfuse/IXYS, in a TO-247-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | G | input | Gate (terminal 1); VGES is ±20 V continuous and ±30 V transient, with gate-threshold VGE(th) of 2.5 V min to 5.5 V max at IC = 1.5 mA. |
| 2 | C | passive | Collector (terminal 2, labelled Drain (Collector)), also connected to the mounting tab; VCES is 1700 V and IC110 is 75 A at TC = 110°C. |
| 3 | E | passive | Emitter (terminal 3, labelled Source (Emitter)), which is the anode side of the anti-parallel diode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse/IXYS |
| Package | TO-247-3 |
| Category | Triode/MOS Tube/Transistor |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-emitter voltage | VCES | 1700 | V | TJ = 25°C to 150°C | 1 | ||
| Collector-gate voltage | VCGR | 1700 | V | TJ = 25°C to 150°C, RGE = 1MΩ | 1 | ||
| Gate-emitter voltage, continuous | VGES | -20 | 20 | V | Continuous | 1 | |
| Gate-emitter voltage, transient | VGEM | -30 | 30 | V | Transient | 1 | |
| Collector current, chip capability | IC25 | 200 | A | TC = 25°C (Chip Capability) | 1 | ||
| Collector current, lead RMS limit | ILRMS | 160 | A | TC = 25°C (Lead RMS Limit) | 1 | ||
| Collector current | IC110 | 75 | A | TC = 110°C | 1 | ||
| Pulsed collector current | ICM | 580 | A | TC = 25°C, 1ms | 1 | ||
| Reverse-bias safe operating area, pulsed collector current | ICM | 150 | A | SSOA (RBSOA), VGE = 15V, TVJ = 125°C, RG = 1Ω, clamped inductive load, VCE < 0.8 • VCES | 1 | ||
| Total power dissipation | PC | 1040 | W | TC = 25°C | 1 | ||
| Operating junction temperature | TJ | -55 | 150 | °C | 1 | ||
| Maximum junction temperature | TJM | 150 | °C | 1 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 1 | ||
| Maximum lead temperature for soldering | TL | 300 | °C | 1 | |||
| Soldering temperature | TSOLD | 260 | °C | 1.6 mm (0.062 in.) from case for 10 | 1 | ||
| Gate-emitter threshold voltage | VGE(th) | 2.5 | 5.5 | V | IC = 1.5mA, VCE = VGE | 1 | |
| Collector-emitter breakdown voltage | BVCES | 1700 | V | IC = 250μA, VGE = 0V | 1 | ||
| Collector leakage current | ICES | 25 | μA | VCE = 0.8 • VCES, VGE = 0V | 1 | ||
| Collector leakage current at high temperature | ICES | 2 | mA | TJ = 125°C | 1 | ||
| Gate leakage current | IGES | -100 | 100 | nA | VCE = 0V, VGE = ±20V | 1 | |
| Collector-emitter saturation voltage | VCE(sat) | 2.6 | 3.1 | V | IC = IC110, VGE = 15V, Note 1 | 1 | |
| Collector-emitter saturation voltage at high temperature | VCE(sat) | 3.1 | V | TJ = 125°C | 1 | ||
| Forward transconductance | gfs | 34 | 56 | S | IC = IC110, VCE = 10V, Note 1 | 2 | |
| Diode forward voltage | VF | 3 | V | IF = IC110, VGE = 0V, Note 1 | 2 | ||
| Diode reverse recovery time | trr | 1.5 | μs | IF = 37A, VGE = 0V, -diF/dt = 100A/μs, VR = 100V | 2 | ||
| Diode peak reverse recovery current | IRM | 50 | A | IF = 37A, VGE = 0V, -diF/dt = 100A/μs, VR = 100V | 2 | ||
| Diode reverse recovery charge | QRM | 38.2 | μC | IF = 37A, VGE = 0V, -diF/dt = 100A/μs, VR = 100V | 2 | ||
| Junction-to-case thermal resistance | RthJC | 0.12 | °C/W | 2 | |||
| Case-to-sink thermal resistance | RthCS | 0.15 | °C/W | 2 | |||
| Input capacitance | Cies | 6930 | pF | 2 | |||
| Output capacitance | Coes | 400 | pF | VCE = 25V, VGE = 0V, f = 1MHz | 2 | ||
| Reverse transfer capacitance | Cres | 150 | pF | 2 | |||
| Total gate charge | Qg | 350 | nC | 2 | |||
| Gate-emitter charge | Qge | 50 | nC | IC = IC110, VGE = 15V, VCE = 0.5 • VCES | 2 | ||
| Gate-collector charge | Qgc | 160 | nC | 2 | |||
| Turn-on delay time | td(on) | 46 | ns | Resistive load, TJ = 25°C; IC = IC110, VGE = 15V, RG = 1Ω, VCE = 0.5 • VCES | 2 | ||
| Turn-on rise time | tr | 160 | ns | Resistive load, TJ = 25°C; IC = IC110, VGE = 15V, RG = 1Ω, VCE = 0.5 • VCES | 2 | ||
| Turn-off delay time | td(off) | 260 | ns | Resistive load, TJ = 25°C; IC = IC110, VGE = 15V, RG = 1Ω, VCE = 0.5 • VCES | 2 | ||
| Turn-off fall time | tf | 440 | ns | Resistive load, TJ = 25°C; IC = IC110, VGE = 15V, RG = 1Ω, VCE = 0.5 • VCES | 2 | ||
| Turn-on delay time | td(on) | 47 | ns | Resistive load, TJ = 125°C; IC = IC110, VGE = 15V, RG = 1Ω, VCE = 0.5 • VCES | 2 | ||
| Turn-on rise time | tr | 230 | ns | Resistive load, TJ = 125°C; IC = IC110, VGE = 15V, RG = 1Ω, VCE = 0.5 • VCES | 2 | ||
| Turn-off fall time | tf | 580 | ns | Resistive load, TJ = 125°C; IC = IC110, VGE = 15V, RG = 1Ω, VCE = 0.5 • VCES | 2 |
CAD (KiCad official)
- Symbol:
IXBX75N170 - Footprint:
Package_TO_SOT_THT:TO-247-3_Vertical - 3D model: TO-247-3 (KiCad packages3D, STEP)
- 3D model files:
ixbx75n170-etched.step/ixbx75n170-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ixbx75n170.step/ixbx75n170.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Littelfuse/IXYS datasheet (6 pp, sha256
0545dd65321eaedf, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).