component
ITE9107A28F4M
Public Made by Adomby adom
CHIPLINK(芯联) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN1x1-4L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ITE9107A28F4M
CHIPLINK(芯联) · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN1x1-4L
ITE9107A28F4M from CHIPLINK(芯联), in a DFN1x1-4L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage, the power output of the device, with a 1.0uF ceramic capacitor recommended at this pin. |
| 2 | GND | power_in | IC ground. |
| 3 | EN | input | Enable pin: pulling it high enables and low disables the device (active high per the Enable section), and floating EN is not recommended. |
| 4 | VIN | power_in | Power supply voltage input, operating from 2.3V to 5.5V, with a 1.0uF ceramic capacitor recommended at this pin. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CHIPLINK(芯联) |
| Package | DFN1x1-4L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Power Supply Operation Voltage | VIN | -0.3 | 6 | V | 3 | ||
| VOUT Output Voltage | VOUT | -0.3 | V | Upper limit printed as VIN+0.3 V | 3 | ||
| Enable Input Voltage | VEN | -0.3 | 6 | V | 3 | ||
| Output Operation Current | IOUT | 300 | mA | 3 | |||
| Junction Temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Lead Temperature Soldering Time | TLEAD | 260 | °C | 10S | 3 | ||
| ESD (Machine Mode) | VESD_MM | 200 | V | Machine Mode (Note 2) | 3 | ||
| Thermal Resistance Junction to Ambient | θJA_DFN1*1-4L | 200 | °C/W | Junction to ambient, DFN1*1-4L (Note 3) | 3 | ||
| Power Supply Operation Voltage | VIN | 2.3 | 5.5 | V | 3 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Enable Range | VEN | 0 | V | 0.0 to VIN | 3 | ||
| VIN Operation Voltage Range | VIN | 2.3 | 5.5 | V | VIN Input Range | 5 | |
| VOUT Output Regulated Voltage | VOUT | 1.1 | 3.6 | V | VOUT Output Range | 5 | |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | IOUT=1mA | 5 | |
| Output Current Normal Operation | IOUT | 300 | mA | Normal Operation Output Current (Note 5) | 5 | ||
| EN Input Voltage High | VENH | 1.2 | V | VIN=5.0V,IOUT=1.0mA | 5 | ||
| EN Input Voltage Low | VENL | 0.3 | V | VIN=5.0V,IOUT=1.0mA | 5 | ||
| Line Regulation | △VLNR | 0.5 | %/V | VIN=(VOUT+1.0V,2.3V) to 5.5V, IOUT=1.0mA | 5 | ||
| Load Regulation | △VLDR | 12 | mV | VIN=VOUT+1.0V, IOUT=1.0mA to 100.0mA | 5 | ||
| Power Supply Ripple Rejection (1 kHz) | PSRR | 78 | dB | VIN=Max{VOUT+1.0V,2.3V},F=1KHz, Ripple=0.2Vpp,IOUT=50mA | 5 | ||
| Power Supply Ripple Rejection (10 kHz) | PSRR | 40 | dB | VIN=Max{VOUT+1.0V,2.3V},F=10KHz, Ripple=0.2Vpp,IOUT=50mA | 5 | ||
| Dropout Voltage (300 mA) | VDROP | 370 | mV | VOUT=3.3V,IOUT=300mA | 5 | ||
| Dropout Voltage (150 mA) | VDROP | 185 | mV | VOUT=3.3V,IOUT=150mA | 5 | ||
| Limit Current | ILIM | 350 | mA | VIN=VEN=5V | 5 | ||
| Input Current At IC Shutdown | ISHDN | 0.1 | 1 | uA | VIN=5.0V,EN=0.0V | 5 | |
| VIN Supply Current | IVIN | 1 | uA | VIN=EN=5.0V, Unload | 5 | ||
| Auto-Discharge Resistance | RDischg | 2 | KΩ | VIN=5.0V,VEN=0.0V | 5 | ||
| Short Current | ISHORT | 500 | mA | VOUT < 0.2V | 5 | ||
| Thermal Shutdown Temperature | TSD | 150 | °C | TJ Rising | 5 | ||
| Thermal Shutdown Returned Temperature | 130 | °C | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus | 11 |
CAD (KiCad official)
- Symbol:
ITE9107A28F4M - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN1x1-4L (KiCad packages3D, STEP)
- 3D model files:
ite9107a28f4m-etched.step/ite9107a28f4m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ite9107a28f4m.step/ite9107a28f4m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CHIPLINK(芯联) datasheet (11 pp, sha256
998e3e81881ad855, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ITE9107A28F4M
**CHIPLINK(芯联)** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN1x1-4L
ITE9107A28F4M from CHIPLINK(芯联), in a DFN1x1-4L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage, the power output of the device, with a 1.0uF ceramic capacitor recommended at this pin. |
| 2 | GND | power_in | IC ground. |
| 3 | EN | input | Enable pin: pulling it high enables and low disables the device (active high per the Enable section), and floating EN is not recommended. |
| 4 | VIN | power_in | Power supply voltage input, operating from 2.3V to 5.5V, with a 1.0uF ceramic capacitor recommended at this pin. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CHIPLINK(芯联) |
| Package | DFN1x1-4L |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Power Supply Operation Voltage | VIN | -0.3 | | 6 | V | | 3 |
| VOUT Output Voltage | VOUT | -0.3 | | | V | Upper limit printed as VIN+0.3 V | 3 |
| Enable Input Voltage | VEN | -0.3 | | 6 | V | | 3 |
| Output Operation Current | IOUT | | | 300 | mA | | 3 |
| Junction Temperature | TJ | -40 | | 150 | °C | | 3 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 3 |
| Lead Temperature Soldering Time | TLEAD | | | 260 | °C | 10S | 3 |
| ESD (Machine Mode) | VESD_MM | | | 200 | V | Machine Mode (Note 2) | 3 |
| Thermal Resistance Junction to Ambient | θJA_DFN1*1-4L | | | 200 | °C/W | Junction to ambient, DFN1*1-4L (Note 3) | 3 |
| Power Supply Operation Voltage | VIN | 2.3 | | 5.5 | V | | 3 |
| Junction Temperature | TJ | -40 | | 125 | °C | | 3 |
| Operating Temperature Range | TA | -40 | | 85 | °C | | 3 |
| Enable Range | VEN | 0 | | | V | 0.0 to VIN | 3 |
| VIN Operation Voltage Range | VIN | 2.3 | | 5.5 | V | VIN Input Range | 5 |
| VOUT Output Regulated Voltage | VOUT | 1.1 | | 3.6 | V | VOUT Output Range | 5 |
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | IOUT=1mA | 5 |
| Output Current Normal Operation | IOUT | 300 | | | mA | Normal Operation Output Current (Note 5) | 5 |
| EN Input Voltage High | VENH | 1.2 | | | V | VIN=5.0V,IOUT=1.0mA | 5 |
| EN Input Voltage Low | VENL | | | 0.3 | V | VIN=5.0V,IOUT=1.0mA | 5 |
| Line Regulation | △VLNR | | | 0.5 | %/V | VIN=(VOUT+1.0V,2.3V) to 5.5V, IOUT=1.0mA | 5 |
| Load Regulation | △VLDR | | | 12 | mV | VIN=VOUT+1.0V, IOUT=1.0mA to 100.0mA | 5 |
| Power Supply Ripple Rejection (1 kHz) | PSRR | 78 | | | dB | VIN=Max{VOUT+1.0V,2.3V},F=1KHz, Ripple=0.2Vpp,IOUT=50mA | 5 |
| Power Supply Ripple Rejection (10 kHz) | PSRR | 40 | | | dB | VIN=Max{VOUT+1.0V,2.3V},F=10KHz, Ripple=0.2Vpp,IOUT=50mA | 5 |
| Dropout Voltage (300 mA) | VDROP | | | 370 | mV | VOUT=3.3V,IOUT=300mA | 5 |
| Dropout Voltage (150 mA) | VDROP | | | 185 | mV | VOUT=3.3V,IOUT=150mA | 5 |
| Limit Current | ILIM | 350 | | | mA | VIN=VEN=5V | 5 |
| Input Current At IC Shutdown | ISHDN | | 0.1 | 1 | uA | VIN=5.0V,EN=0.0V | 5 |
| VIN Supply Current | IVIN | | 1 | | uA | VIN=EN=5.0V, Unload | 5 |
| Auto-Discharge Resistance | RDischg | | 2 | | KΩ | VIN=5.0V,VEN=0.0V | 5 |
| Short Current | ISHORT | | 500 | | mA | VOUT < 0.2V | 5 |
| Thermal Shutdown Temperature | TSD | | 150 | | °C | TJ Rising | 5 |
| Thermal Shutdown Returned Temperature | | | 130 | | °C | | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | | body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus | 11 |
## CAD (KiCad official)
- Symbol: `ITE9107A28F4M`
- Footprint: `Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm`
- 3D model: DFN1x1-4L (KiCad packages3D, STEP)
- 3D model files: `ite9107a28f4m-etched.step` / `ite9107a28f4m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ite9107a28f4m.step` / `ite9107a28f4m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [CHIPLINK(芯联) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603371332864663552) (11 pp, sha256 `998e3e81881ad855`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ite9107a28f4m-datasheet.pdf)