main
History Download
Ray Publish 0.1.0 990b282

ISOW7840DWER

Texas Instruments · Digital Isolators · SOIC-16-300mil

ISOW7840DWER from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage for the primary side, referenced to GND1.
2 GND1 power_in Ground connection for VCC.
3 INA input Input channel A.
4 INB input Input channel B.
5 INC input Input channel C.
6 IND input Input channel D.
7 NC unconnected Not connected.
8 GND1 power_in Ground connection for VCC.
9 GND2 power_in Ground connection for VISO.
10 SEL input VISO selection pin: VISO is 5 V when SEL is shorted to VISO, and VISO is 3.3 V when SEL is shorted to GND2 or left floating.
11 OUTD output Output channel D.
12 OUTC output Output channel C.
13 OUTB output Output channel B.
14 OUTA output Output channel A.
15 GND2 power_in Ground connection for VISO.
16 VISO power_out Isolated supply voltage, determined by the SEL pin (5 V or 3.3 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.5 6 V 9
Isolated supply voltage VISO -0.5 6 V 9
Voltage at INx, OUTx, SEL pins VIO -0.5 V 9
Maximum output current through data channels IO -15 15 mA 9
Junction temperature TJ 150 °C 9
Storage temperature Tstg -65 150 °C 9
Supply voltage VCC 3 5.5 V 9
High level output current IOH -4 mA VSO = 5 V 9
High level output current IOH -2 mA VSO = 3.3 V 9
Low level output current IOL 4 mA VSO = 5 V 9
Low level output current IOL 2 mA VSO = 3.3 V 9
Low-level input voltage VIL 0 V 9
Data rate DR 100 Mbps 9
Ambient temperature TA -40 125 °C 9
Maximum power dissipation (both sides) PD 1.02 W VCC = 5.5 V, IISO = 110 mA, TJ = 150°C, TA ≤ 80°C, CL = 15 pF, 50-MHz 50% duty-cycle square wave 10
Maximum power dissipation (side-1) PD1 0.51 W VCC = 5.5 V, IISO = 110 mA, TJ = 150°C, TA ≤ 80°C, CL = 15 pF, 50-MHz 50% duty-cycle square wave 10
Maximum power dissipation (side-2) PD2 0.51 W VCC = 5.5 V, IISO = 110 mA, TJ = 150°C, TA ≤ 80°C, CL = 15 pF, 50-MHz 50% duty-cycle square wave 10
Isolated supply voltage VISO 4.75 5.07 5.43 V VCC = 5 V ±10%, SEL shorted to VISO; External IISO = 0 to 50 mA 13
Isolated supply voltage VISO 4.5 5.07 5.43 V VCC = 5 V ±10%, SEL shorted to VISO; External IISO = 0 to 130 mA 13
DC line regulation VISO(LINE) 2 mV/V VCC = 5 V ±10%, SEL shorted to VISO; IISO = 50 mA, VCC = 4.5 V to 5.5 V 13
DC load regulation VISO(LOAD) 1 % VCC = 5 V ±10%, SEL shorted to VISO; IISO = 0 to 130 mA 13
Output ripple on isolated supply (pk-pk) VISO(RIP) 100 mV VCC = 5 V ±10%, SEL shorted to VISO; 20-MHz bandwidth, CLOAD = 0.1 µF // 20 µF, IISO = 130 mA 13
DC current from supply under short circuit on VISO ICC_SC 137 mA VCC = 5 V ±10%, SEL shorted to VISO; VISO shorted to GND2 13
Low level output voltage VOL 0.2 0.4 V VCC = 5 V ±10%, SEL shorted to VISO; IO = 4 mA, see Figure 8-1 13
Low level input current IIL -10 µA VIL = 0 at INx or SEL 13
High level input current IIH 10 µA VIH = VSI at INx or SEL 13
Common mode transient immunity CMTI 100 kV/us VI = VSI or 0 V, VCM = 1000 V; see Figure 8-2 13
Current drawn from supply ICC 23 mA VCC = 5 V ±10%, SEL shorted to VISO; No external ILOAD; VI = 0 V (ISOW7840) 14
Current drawn from supply ICC 17 mA VCC = 5 V ±10%, SEL shorted to VISO; No external ILOAD; VI = VSI (ISOW7840) 14
Current drawn from supply ICC 56 mA VCC = 5 V ±10%, SEL shorted to VISO; all channels switching, square wave 100 Mbps; CL = 15 pF, no external ILOAD 14
Current available to isolated supply IISO(OUT) 128 mA VCC = 5 V ±10%, SEL shorted to VISO; VI = 0 V (ISOW7840) 14
Current available to isolated supply IISO(OUT) 130 mA VCC = 5 V ±10%, SEL shorted to VISO; VI = VSI (ISOW7840) 14
Current available to isolated supply IISO(OUT) 111 mA VCC = 5 V ±10%, SEL shorted to VISO; all channels switching, square wave 100 Mbps; CL = 15 pF 14
Isolated supply voltage VISO 3.13 3.34 3.56 V VCC = 5 V ±10%, SEL shorted to GND2; External IISO = 0 to 50 mA 18
Isolated supply voltage VISO 3 3.34 3.56 V VCC = 5 V ±10%, SEL shorted to GND2; External IISO = 0 to 130 mA 18
DC load regulation VISO(LOAD) 1 % VCC = 5 V ±10%, SEL shorted to GND2; IISO = 10 to 130 mA 18
Output ripple on isolated supply (pk-pk) VISO(RIP) 100 mV VCC = 5 V ±10%, SEL shorted to GND2; 20-MHz bandwidth, CLOAD = 0.1 µF // 20 µF, IISO = 130 mA 18
Current drawn from supply ICC 15 mA VCC = 5 V ±10%, SEL shorted to GND2; No external ILOAD; VI = VSI (ISOW7840) 19
Current available to isolated supply IISO(OUT) 130 mA VCC = 5 V ±10%, SEL shorted to GND2; VI = VSI (ISOW7840) 19
Isolated supply voltage VISO 4.5 5.07 5.43 V VCC = 3.3 V ±10%, SEL shorted to VISO; External IISO = 0 to 40 mA 16
DC line regulation VISO(LINE) 2 mV/V VCC = 3.3 V ±10%, SEL shorted to VISO; IISO = 20 mA, VCC = 4.5 V to 5.5 V 16
DC load regulation VISO(LOAD) 1 % VCC = 3.3 V ±10%, SEL shorted to VISO; IISO = 0 to 40 mA 16
Output ripple on isolated supply (pk-pk) VISO(RIP) 90 mV VCC = 3.3 V ±10%, SEL shorted to VISO; 20-MHz bandwidth, CLOAD = 0.1 µF // 20 µF, IISO = 40 mA 17
DC current from supply under short circuit on VISO ICC_SC 137 mA VCC = 3.3 V ±10%, SEL shorted to VISO; VISO shorted to GND2 17
Low level output voltage VOL 0.2 0.4 V VCC = 3.3 V ±10%, SEL shorted to VISO; IO = 4 mA, see Figure 8-1 16
Isolated supply voltage VISO 3.13 3.34 3.58 V VCC = 3.3 V ±10%, SEL shorted to GND2; External IISO = 0 to 30 mA 22
Isolated supply voltage VISO 3 3.34 3.58 V VCC = 3.3 V ±10%, SEL shorted to GND2; External IISO = 0 to 75 mA 22
DC load regulation VISO(LOAD) 1 % VCC = 3.3 V ±10%, SEL shorted to GND2; IISO = 0 to 75 mA 22
Current drawn from supply ICC 20 mA VCC = 3.3 V ±10%, SEL shorted to GND2; No external ILOAD; VI = VSI (ISOW7840) 23
Current available to isolated supply IISO(OUT) 75 mA VCC = 3.3 V ±10%, SEL shorted to GND2; VI = VSI (ISOW7840) 23
DC current from supply under short circuit on VISO ICC_SC 143 mA VCC = 3.3 V ±10%, SEL shorted to GND2; VISO shorted to GND2 22
Junction-to-ambient thermal resistance RθJA 56.8 °C/W 10
Junction-to-case (top) thermal resistance RθJC(top) 15.6 °C/W 10
Junction-to-board thermal resistance RθJB 28.5 °C/W 10
Junction-to-top characterization parameter ΨJT 2.4 °C/W 10
Junction-to-board characterization parameter ΨJB 28.5 °C/W 10
Positive-going UVLO threshold on VCC, VISO VCC+(UVLO) 2.7 V 13
Negative-going UVLO threshold on VCC, VISO VCC-(UVLO) 2.1 V 13
UVLO threshold hysteresis on VCC, VISO VHYS (UVLO) 0.2 V 13
Efficiency at maximum load current EFF 53 % VCC = 5 V ±10%, SEL shorted to VISO; IISO = 130 mA, CLOAD = 0.1 µF // 10 µF; VI = VSI 13

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper pins. Ensure that enough copper is present on both GND pins to prevent the internal junction temperature of the 43

CAD (KiCad official)

  • Symbol: ISOW7840DWER
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: isow7840dwer-etched.step / isow7840dwer-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isow7840dwer.step / isow7840dwer.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 dd05ae9e3ce84dfc, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF