3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownISOW7721FDFMR
Texas Instruments · Digital Isolators (With Power) · SOIC-20
ISOW7721FDFMR from Texas Instruments, in a SOIC-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIO | power_in | Side 1 logic supply, specified from 1.71V to 5.5V in the features section. |
| 2 | INA | input | Input channel A of the side 1 logic isolation channel. |
| 3 | OUTB | output | Output channel B of the side 2 logic isolation channel. |
| 4 | EN_IO1 | input | Output enable 1: high or open enables the side 1 channel output, while low forces it to high impedance and disables the side 1 input transmitter. |
| 5 | EN | bidirectional | Power converter enable: high to the VIO level enables the DC-DC converter and low at the GND1 level disables it. |
| 6 | GNDIO | power_in | Ground connection for VIO that must be shorted to GND1 on the board. |
| 7 | LF | input | Multi-device control: tie to GND1 for primary or standalone use and to VDD for secondary use. |
| 8 | CC | bidirectional | Multi-device primary/secondary synchronization pin that is an output when LF is GND1 and an input when LF is VDD, and is left floating if unused. |
| 9 | VDD | power_in | Side 1 DC-DC converter power supply, specified from 3V to 5.5V. |
| 10 | GND1 | power_in | Ground connection for VDD that must be shorted to GNDIO on the board. |
| 11 | GND2 | power_in | Ground connection for VISOOUT that can be shorted to GISOIN or connected through a ferrite bead. |
| 12 | VISOOUT | power_out | Isolated power converter output, set to 5V or 3.3V by the VSEL pin and rated up to 0.55W in total. |
| 13 | VSEL | input | VISOOUT selection pin: shorted to VISOOUT gives 5V output and shorted to GND2 gives 3.3V output. |
| 14 | NC | unconnected | No connection; shown as NC in the pin configuration figure. |
| 15 | GISOIN | power_in | Ground connection for VISOIN that can be shorted to GND2 or connected through a ferrite bead. |
| 16 | NC | unconnected | No connection; shown as NC in the pin configuration figure. |
| 17 | EN_IO2 | input | Output enable 2: high or open enables the side 2 channel output, while low forces it to high impedance and disables the side 2 input transmitter. |
| 18 | INB | input | Input channel B of the side 2 logic isolation channel. |
| 19 | OUTA | output | Output channel A of the side 1 logic isolation channel. |
| 20 | VISOIN | power_in | Side 2 supply voltage for the isolation channels, which can be shorted to VISOOUT or connected through a ferrite bead. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20 |
| Category | Signal Isolation Devices |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power converter supply voltage | VDD | -0.5 | 6 | V | 6 | ||
| Isolated supply voltage, input supply for secondary side isolation channels | VISOIN | -0.5 | 6 | V | 6 | ||
| Isolated supply voltage, power converter output | VISOOUT | -0.5 | 4 | V | VSEL shorted to GND2 | 6 | |
| Isolated supply voltage, power converter output | VISOOUT | -0.5 | 6 | V | VSEL shorted to VISOOUT | 6 | |
| Primary side logic supply voltage | VIO | -0.5 | 6 | V | 6 | ||
| Voltage at LF | VLF | -0.5 | 6 | V | 6 | ||
| Maximum output current through data channels | IO | -15 | 15 | mA | 6 | ||
| Junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Power converter supply voltage, 3.3 V operation | VDD | 2.97 | 3.3 | 3.63 | V | 3.3 V operation | 7 |
| Power converter supply voltage, 5 V operation | VDD | 4.5 | 5 | 5.5 | V | 5 V operation | 7 |
| Channel logic supply voltage, 1.8 V operation | VIO, VISOIN | 1.71 | 1.89 | V | 1.8 V operation | 7 | |
| Channel logic supply voltage, 2.5 V, 3.3 V, and 5 V operation | VIO, VISOIN | 2.25 | 5.5 | V | 2.5 V, 3.3 V, and 5 V operation | 7 | |
| Ambient temperature | TA | -40 | 125 | °C | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 68.5 | °C/W | 8 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 24.6 | °C/W | 8 | |||
| Junction-to-board thermal resistance | RθJB | 53.7 | °C/W | 8 | |||
| Junction-to-top characterization parameter | ΨJT | 17.1 | °C/W | 8 | |||
| Junction-to-board characterization parameter | ΨJB | 50.9 | °C/W | 8 | |||
| Isolated supply voltage | VISOOUT | 4.75 | 5 | 5.25 | V | VDD = 5 V, VISOOUT = 5 V, VSEL = VISOOUT; external IISOOUT = 0 to 55 mA | 11 |
| Isolated supply voltage | VISOOUT | 4.5 | 5 | 5.25 | V | VDD = 5 V, VISOOUT = 5 V, VSEL = VISOOUT; external IISOOUT = 0 to 110 mA | 11 |
| Isolated supply voltage | VISOOUT | 3.135 | 3.3 | 3.465 | V | VDD = 5 V, VISOOUT = 3.3 V, VSEL = GND2; external IISOOUT = 0 to 70 mA | 11 |
| Power converter supply current, power converter disabled | IDD | 0.28 | 0.45 | mA | EN/FLT = GND1, VISOOUT = No ILOAD | 12 | |
| Logic supply current, power converter disabled | IIO | 0.27 | 0.57 | mA | EN/FLT = GND1 | 12 | |
| Power converter supply current input | IDD | 115 | 171 | mA | VDD = 5 V, VSEL = VISOOUT, ILOAD = 55 mA | 12 | |
| Power converter supply current input | IDD | 225 | 316 | mA | VDD = 5 V, VSEL = VISOOUT, ILOAD = 110 mA | 12 | |
| Power converter supply current input | IDD | 127 | 169 | mA | VDD = 5 V, VSEL = GND2, ILOAD = 70 mA | 12 | |
| Power converter supply current input | IDD | 250 | 310 | mA | VDD = 5 V, VSEL = GND2, ILOAD = 140 mA | 12 | |
| Power converter supply current input | IDD | 74 | 112 | mA | VDD = 3.3 V, VSEL = GND2, ILOAD = 30 mA | 12 | |
| Power converter supply current input | IDD | 143 | 216 | mA | VDD = 3.3 V, VSEL = GND2, ILOAD = 60 mA | 12 | |
| Common mode transient immunity | CMTI | 85 | 100 | kV/µs | VI = VSI or 0 V, VCM = 1000 V (VIO, VISOIN = 5 V) | 13 | |
| Common mode transient immunity | CMTI | 85 | 100 | kV/µs | VI = VSI or 0 V, VCM = 1000 V (VIO, VISOIN = 3.3 V) | 14 | |
| Common mode transient immunity | CMTI | 85 | 100 | kV/µs | VI = VSI or 0 V, VCM = 1000 V (VIO, VISOIN = 2.5 V) | 15 | |
| Common mode transient immunity | CMTI | 85 | 100 | kV/µs | VI = VSI or 0 V, VCM = 1000 V (VIO, VISOIN = 1.8 V) | 16 | |
| Propagation delay time | tPLH, tPHL | 7.6 | 10.7 | 15.7 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 |
| Pulse width distortion | PWD | 0.9 | 5 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 | |
| Output signal rise time | tr | 2.5 | 3.6 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 | |
| Output signal fall time | tf | 2.4 | 3.5 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 | |
| Channel disable propagation delay, high-to-high impedance output | tPHZ | 217 | 286 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 | |
| Channel disable propagation delay, low-to-high impedance output | tPLZ | 217 | 286 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 | |
| Channel enable propagation delay, high impedance-to-high output for ISOW7721 with F suffix | tPZH | 237 | 333 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 | |
| Channel enable propagation delay, high impedance-to-low output for ISOW7721 with F suffix | tPZL | 237 | 333 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 | |
| ENIO propagation delay time (opposite side) | ENIO_tPLH, ENIO_tPHL | 210 | 473.8 | ns | VISOIN = 5 V ±10%, VIO = 5 V ±10% | 17 | |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 16.2 | ns | VISOIN = 3.3 V ±10%, VIO = 3.3 V ±10% | 18 |
| Channel enable propagation delay, high impedance-to-high output for ISOW7721 with F suffix | tPZH | 226 | 319.1 | ns | VISOIN = 3.3 V ±10%, VIO = 3.3 V ±10% | 18 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | pins. Verify that enough copper is present on both GND pins to prevent the internal junction temperature of the | 41 |
CAD (KiCad official)
- Symbol:
ISOW7721FDFMR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20 (KiCad packages3D, STEP)
- 3D model files:
isow7721fdfmr-etched.step/isow7721fdfmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isow7721fdfmr.step/isow7721fdfmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (54 pp, sha256
df236d2a09765149, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).