main
Ray
Publish 0.1.0
6b5bad6
ISO7762DBQR
Texas Instruments · Digital Isolators · SSOP-16-150mil
ISO7762DBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1; the datasheet gives a supply range of 2.25 V to 5.5 V and an absolute maximum of -0.5 V to 6 V referenced to GND1. |
| 2 | INA | input | Input, channel A; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 3 | INB | input | Input, channel B; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 4 | INC | input | Input, channel C; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 5 | IND | input | Input, channel D; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 6 | OUTE | output | Output, channel E; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 7 | OUTF | output | Output, channel F; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 8 | GND1 | power_in | Ground connection for VCC1 (side 1 ground reference for all side-1 signals). |
| 9 | GND2 | power_in | Ground connection for VCC2 (side 2 ground reference for all side-2 signals). |
| 10 | INF | input | Input, channel F; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 11 | INE | input | Input, channel E; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 12 | OUTD | output | Output, channel D; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 13 | OUTC | output | Output, channel C; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 14 | OUTB | output | Output, channel B; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 15 | OUTA | output | Output, channel A; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 16 | VCC2 | power_in | Power supply for side 2; the datasheet gives a supply range of 2.25 V to 5.5 V and an absolute maximum of -0.5 V to 6 V referenced to GND2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC1, VCC2 (recommended) | VCC1, VCC2 | 2.25 | 5.5 | V | 7 | ||
| UVLO threshold when supply voltage is rising | Vcc (UVLO+) | 2 | 2.25 | V | 7 | ||
| UVLO threshold when supply voltage is falling | Vcc (UVLO-) | 1.7 | 1.8 | V | 7 | ||
| Supply voltage UVLO hysteresis | VHYS (UVLO) | 100 | 200 | mV | 7 | ||
| High level output current | IOH | -4 | mA | VCCO = 5 V | 7 | ||
| High level output current | IOH | -2 | mA | VCCO = 3.3 V | 7 | ||
| High level output current | IOH | -1 | mA | VCCO = 2.5 V | 7 | ||
| Low level output current | IOL | 4 | mA | VCCO = 5 V | 7 | ||
| Low level output current | IOL | 2 | mA | VCCO = 3.3 V | 7 | ||
| Low level output current | IOL | 1 | mA | VCCO = 2.5 V | 7 | ||
| Data rate | DR | 0 | 100 | Mbps | 7 | ||
| Ambient temperature | TA | -55 | 25 | 125 | °C | 7 | |
| Supply voltage VCC1, VCC2 (absolute maximum) | VCC1, VCC2 | -0.5 | 6 | V | 6 | ||
| Voltage at INx, OUTx | V | -0.5 | V | 6 | |||
| Output current | Io | -15 | 15 | mA | 6 | ||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Low-level output voltage (5 V) | VOL | 0.2 | 0.4 | V | IOL = 4 mA; See Figure 6-1 | 13 | |
| High-level input current (5 V) | IIH | 10 | µA | VIH = VCCI at INx | 13 | ||
| Low-level input current (5 V) | IIL | -10 | µA | VIL = 0 V at INx | 13 | ||
| Common mode transient immunity (5 V) | CMTI | 85 | 100 | kV/μs | VI = VCCI or 0 V, VCM = 1200 V; See Figure 6-3 | 13 | |
| Low-level output voltage (3.3 V) | VOL | 0.1 | 0.3 | V | IOL = 2mA ; See Figure 6-1 | 15 | |
| Common mode transient immunity (3.3 V) | CMTI | 85 | 100 | kV/us | VI = VCC or 0 V, VCM = 1200 V; See Figure 6-3 | 15 | |
| Low-level output voltage (2.5 V) | VOL | 0.05 | 0.2 | V | IOL = 1mA ; See Figure 6-1 | 17 | |
| Common mode transient immunity (2.5 V) | CMTI | 85 | 100 | kV/us | VI = VCC or 0 V, VCM = 1200 V; See Figure 6-3 | 17 | |
| Supply current DC signal, ICC1 (5 V) | ICC1 | 2.1 | 4.1 | mA | DC signal; VI = VCCI (ISO7762) | 14 | |
| Supply current DC signal, ICC2 (5 V) | ICC2 | 2.6 | 4.9 | mA | DC signal; VI = VCCI (ISO7762) | 14 | |
| Supply current AC signal, ICC1 (5 V) | ICC1 | 4.5 | 6.7 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 14 | |
| Supply current AC signal, ICC2 (5 V) | ICC2 | 4 | 6.5 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 14 | |
| Supply current AC signal, ICC1 (5 V) | ICC1 | 5.6 | 8 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 14 | |
| Supply current AC signal, ICC2 (5 V) | ICC2 | 6 | 8.9 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 14 | |
| Supply current AC signal, ICC1 (5 V) | ICC1 | 16.5 | 21.3 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 14 | |
| Supply current AC signal, ICC2 (5 V) | ICC2 | 25.7 | 34 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 14 | |
| Supply current DC signal, ICC1 (3.3 V) | ICC1 | 2.1 | 4 | mA | DC signal; VI = VCCI (ISO7762) | 16 | |
| Supply current DC signal, ICC2 (3.3 V) | ICC2 | 2.5 | 4.8 | mA | DC signal; VI = VCCI (ISO7762) | 16 | |
| Supply current AC signal, ICC1 (3.3 V) | ICC1 | 4.4 | 6.6 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 16 | |
| Supply current AC signal, ICC2 (3.3 V) | ICC2 | 3.9 | 6.3 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 16 | |
| Supply current AC signal, ICC1 (3.3 V) | ICC1 | 5.2 | 7.5 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 16 | |
| Supply current AC signal, ICC2 (3.3 V) | ICC2 | 5.4 | 8.1 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 16 | |
| Supply current AC signal, ICC1 (3.3 V) | ICC1 | 12.9 | 16.9 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 16 | |
| Supply current AC signal, ICC2 (3.3 V) | ICC2 | 19.5 | 26 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 16 | |
| Supply current DC signal, ICC1 (2.5 V) | ICC1 | 2.1 | 4 | mA | DC signal; VI = VCCI (ISO7762) | 18 | |
| Supply current DC signal, ICC2 (2.5 V) | ICC2 | 2.6 | 4.8 | mA | DC signal; VI = VCCI (ISO7762) | 18 | |
| Supply current AC signal, ICC1 (2.5 V) | ICC1 | 4.4 | 6.5 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 18 | |
| Supply current AC signal, ICC2 (2.5 V) | ICC2 | 3.9 | 6.3 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 18 | |
| Supply current AC signal, ICC1 (2.5 V) | ICC1 | 5 | 7.2 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 18 | |
| Supply current AC signal, ICC2 (2.5 V) | ICC2 | 5 | 7.6 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 18 | |
| Supply current AC signal, ICC1 (2.5 V) | ICC1 | 10.9 | 14.4 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 18 | |
| Supply current AC signal, ICC2 (2.5 V) | ICC2 | 15.6 | 21.3 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 18 | |
| Propagation delay time (5 V) | tPLH, tPHL | 6 | 11 | 17 | ns | See Figure 6-1 | 19 |
| Propagation delay time (3.3 V) | tPLH, tPHL | 6 | 12 | 18.5 | ns | See Figure 6-1 | 20 |
| Propagation delay time (2.5 V) | tPLH, tPHL | 7.5 | 13 | 21 | ns | See Figure 6-1 | 21 |
| Default output delay time from input power loss (5 V) | tDO | 0.2 | 0.3 | μs | Measured from the time VCC goes below 1.7V. See Figure 6-2 | 19 | |
| Default output delay time from input power loss (3.3 V) | tDO | 0.2 | 0.3 | μs | Measured from the time VCC goes below 1.7V. See Figure 6-2 | 20 | |
| Default output delay time from input power loss (2.5 V) | tDO | 0.1 | 0.3 | μs | Measured from the time VCC goes below 1.7V. See Figure 6-2 | 21 | |
| Output signal rise time (5 V) | tr | 1.1 | 3.9 | ns | See Figure 6-1 | 19 | |
| Output signal fall time (5 V) | tf | 1.4 | 3.9 | ns | 19 | ||
| Junction-to-ambient thermal resistance (DBQ-16) | RθJA | 86.5 | °C/W | 8 | |||
| Junction-to-case (top) thermal resistance (DBQ-16) | RθJC(top) | 26.9 | °C/W | 8 | |||
| Junction-to-board thermal resistance (DBQ-16) | RθJB | 36.6 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
ISO7762DBQR - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
iso7762dbqr-etched.step/iso7762dbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7762dbqr.step/iso7762dbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
fc874e117ffefc48, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ISO7762DBQR
**Texas Instruments** · Digital Isolators · SSOP-16-150mil
ISO7762DBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1; the datasheet gives a supply range of 2.25 V to 5.5 V and an absolute maximum of -0.5 V to 6 V referenced to GND1. |
| 2 | INA | input | Input, channel A; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 3 | INB | input | Input, channel B; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 4 | INC | input | Input, channel C; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 5 | IND | input | Input, channel D; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 6 | OUTE | output | Output, channel E; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 7 | OUTF | output | Output, channel F; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 8 | GND1 | power_in | Ground connection for VCC1 (side 1 ground reference for all side-1 signals). |
| 9 | GND2 | power_in | Ground connection for VCC2 (side 2 ground reference for all side-2 signals). |
| 10 | INF | input | Input, channel F; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 11 | INE | input | Input, channel E; voltage must stay between -0.5 V and VCCI + 0.5 V, and must not exceed 6 V. |
| 12 | OUTD | output | Output, channel D; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 13 | OUTC | output | Output, channel C; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 14 | OUTB | output | Output, channel B; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 15 | OUTA | output | Output, channel A; output current is limited to ±15 mA absolute maximum, and the default output is high because this device has no F suffix. |
| 16 | VCC2 | power_in | Power supply for side 2; the datasheet gives a supply range of 2.25 V to 5.5 V and an absolute maximum of -0.5 V to 6 V referenced to GND2. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC1, VCC2 (recommended) | VCC1, VCC2 | 2.25 | | 5.5 | V | | 7 |
| UVLO threshold when supply voltage is rising | Vcc (UVLO+) | 2 | | 2.25 | V | | 7 |
| UVLO threshold when supply voltage is falling | Vcc (UVLO-) | 1.7 | | 1.8 | V | | 7 |
| Supply voltage UVLO hysteresis | VHYS (UVLO) | 100 | | 200 | mV | | 7 |
| High level output current | IOH | -4 | | | mA | VCCO = 5 V | 7 |
| High level output current | IOH | -2 | | | mA | VCCO = 3.3 V | 7 |
| High level output current | IOH | -1 | | | mA | VCCO = 2.5 V | 7 |
| Low level output current | IOL | | | 4 | mA | VCCO = 5 V | 7 |
| Low level output current | IOL | | | 2 | mA | VCCO = 3.3 V | 7 |
| Low level output current | IOL | | | 1 | mA | VCCO = 2.5 V | 7 |
| Data rate | DR | 0 | | 100 | Mbps | | 7 |
| Ambient temperature | TA | -55 | 25 | 125 | °C | | 7 |
| Supply voltage VCC1, VCC2 (absolute maximum) | VCC1, VCC2 | -0.5 | | 6 | V | | 6 |
| Voltage at INx, OUTx | V | -0.5 | | | V | | 6 |
| Output current | Io | -15 | | 15 | mA | | 6 |
| Junction temperature | TJ | | | 150 | °C | | 6 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| Low-level output voltage (5 V) | VOL | | 0.2 | 0.4 | V | IOL = 4 mA; See Figure 6-1 | 13 |
| High-level input current (5 V) | IIH | | | 10 | µA | VIH = VCCI at INx | 13 |
| Low-level input current (5 V) | IIL | -10 | | | µA | VIL = 0 V at INx | 13 |
| Common mode transient immunity (5 V) | CMTI | 85 | 100 | | kV/μs | VI = VCCI or 0 V, VCM = 1200 V; See Figure 6-3 | 13 |
| Low-level output voltage (3.3 V) | VOL | | 0.1 | 0.3 | V | IOL = 2mA ; See Figure 6-1 | 15 |
| Common mode transient immunity (3.3 V) | CMTI | 85 | 100 | | kV/us | VI = VCC or 0 V, VCM = 1200 V; See Figure 6-3 | 15 |
| Low-level output voltage (2.5 V) | VOL | | 0.05 | 0.2 | V | IOL = 1mA ; See Figure 6-1 | 17 |
| Common mode transient immunity (2.5 V) | CMTI | 85 | 100 | | kV/us | VI = VCC or 0 V, VCM = 1200 V; See Figure 6-3 | 17 |
| Supply current DC signal, ICC1 (5 V) | ICC1 | | 2.1 | 4.1 | mA | DC signal; VI = VCCI (ISO7762) | 14 |
| Supply current DC signal, ICC2 (5 V) | ICC2 | | 2.6 | 4.9 | mA | DC signal; VI = VCCI (ISO7762) | 14 |
| Supply current AC signal, ICC1 (5 V) | ICC1 | | 4.5 | 6.7 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 14 |
| Supply current AC signal, ICC2 (5 V) | ICC2 | | 4 | 6.5 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 14 |
| Supply current AC signal, ICC1 (5 V) | ICC1 | | 5.6 | 8 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 14 |
| Supply current AC signal, ICC2 (5 V) | ICC2 | | 6 | 8.9 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 14 |
| Supply current AC signal, ICC1 (5 V) | ICC1 | | 16.5 | 21.3 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 14 |
| Supply current AC signal, ICC2 (5 V) | ICC2 | | 25.7 | 34 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 14 |
| Supply current DC signal, ICC1 (3.3 V) | ICC1 | | 2.1 | 4 | mA | DC signal; VI = VCCI (ISO7762) | 16 |
| Supply current DC signal, ICC2 (3.3 V) | ICC2 | | 2.5 | 4.8 | mA | DC signal; VI = VCCI (ISO7762) | 16 |
| Supply current AC signal, ICC1 (3.3 V) | ICC1 | | 4.4 | 6.6 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 16 |
| Supply current AC signal, ICC2 (3.3 V) | ICC2 | | 3.9 | 6.3 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 16 |
| Supply current AC signal, ICC1 (3.3 V) | ICC1 | | 5.2 | 7.5 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 16 |
| Supply current AC signal, ICC2 (3.3 V) | ICC2 | | 5.4 | 8.1 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 16 |
| Supply current AC signal, ICC1 (3.3 V) | ICC1 | | 12.9 | 16.9 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 16 |
| Supply current AC signal, ICC2 (3.3 V) | ICC2 | | 19.5 | 26 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 16 |
| Supply current DC signal, ICC1 (2.5 V) | ICC1 | | 2.1 | 4 | mA | DC signal; VI = VCCI (ISO7762) | 18 |
| Supply current DC signal, ICC2 (2.5 V) | ICC2 | | 2.6 | 4.8 | mA | DC signal; VI = VCCI (ISO7762) | 18 |
| Supply current AC signal, ICC1 (2.5 V) | ICC1 | | 4.4 | 6.5 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 18 |
| Supply current AC signal, ICC2 (2.5 V) | ICC2 | | 3.9 | 6.3 | mA | All channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 18 |
| Supply current AC signal, ICC1 (2.5 V) | ICC1 | | 5 | 7.2 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 18 |
| Supply current AC signal, ICC2 (2.5 V) | ICC2 | | 5 | 7.6 | mA | All channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 18 |
| Supply current AC signal, ICC1 (2.5 V) | ICC1 | | 10.9 | 14.4 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 18 |
| Supply current AC signal, ICC2 (2.5 V) | ICC2 | | 15.6 | 21.3 | mA | All channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 18 |
| Propagation delay time (5 V) | tPLH, tPHL | 6 | 11 | 17 | ns | See Figure 6-1 | 19 |
| Propagation delay time (3.3 V) | tPLH, tPHL | 6 | 12 | 18.5 | ns | See Figure 6-1 | 20 |
| Propagation delay time (2.5 V) | tPLH, tPHL | 7.5 | 13 | 21 | ns | See Figure 6-1 | 21 |
| Default output delay time from input power loss (5 V) | tDO | | 0.2 | 0.3 | μs | Measured from the time VCC goes below 1.7V. See Figure 6-2 | 19 |
| Default output delay time from input power loss (3.3 V) | tDO | | 0.2 | 0.3 | μs | Measured from the time VCC goes below 1.7V. See Figure 6-2 | 20 |
| Default output delay time from input power loss (2.5 V) | tDO | | 0.1 | 0.3 | μs | Measured from the time VCC goes below 1.7V. See Figure 6-2 | 21 |
| Output signal rise time (5 V) | tr | | 1.1 | 3.9 | ns | See Figure 6-1 | 19 |
| Output signal fall time (5 V) | tf | | 1.4 | 3.9 | ns | | 19 |
| Junction-to-ambient thermal resistance (DBQ-16) | RθJA | | 86.5 | | °C/W | | 8 |
| Junction-to-case (top) thermal resistance (DBQ-16) | RθJC(top) | | 26.9 | | °C/W | | 8 |
| Junction-to-board thermal resistance (DBQ-16) | RθJB | | 36.6 | | °C/W | | 8 |
## CAD (KiCad official)
- Symbol: `ISO7762DBQR`
- Footprint: `Package_SO:SSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `iso7762dbqr-etched.step` / `iso7762dbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iso7762dbqr.step` / `iso7762dbqr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/iso7762.pdf) (52 pp, sha256 `fc874e117ffefc48`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/iso7762dbqr-datasheet.pdf)